Manuals for Lervia Sewing Machines
Below you can find all models Lervia Sewing Machines for which we have manuals available. Also view the frequenty asked questions at the bottom of the page for useful tips about your product. Is your model not on the list? Please contact us.
Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.
Frequently Asked Questions
Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.
What size needle should I use? Verified
The size of the needle depends on the fabric. For a thicker fabric, you will need a thinker needle. The application of the needle of often mentioned on the packaging.
This was helpful (1122) Read moreI have checked everything, but my sewing machine thread keeps breaking, what can I do? Verified
If the upper thread of the machine keeps breaking where the needle enters the fabric, it could be that the needleplate or bobbin case have minor damages in the form of scratches and/or sharp edges. These minor damages can cause the thread to break after a few stitches.
This was helpful (1045) Read moreHow long does a sewing machine neelde last? Verified
This varies between manufacturers, but in general a needle will last about 8 hours. It might take longer for the needle to break, but before that it will have become blunt and might damage the fabric.
This was helpful (530) Read moreMy needle keeps breaking, what is causing this? Verified
There can be various reasons for this. The needle may not be the correct one for the selected fabric, the needle may have been set too low, the fabric may not be properly guided or the bobbin case may be placed incorrectly.
This was helpful (491) Read moreDo I need to turn my sewing machine completely off to replace the needle? Verified
You can change the needle after turning off the product with the on/off switch. When cleaning the product you should disconnect it from the power supply.
This was helpful (378) Read moreLatest comments
(Translated by Google)
Lervia KH4001 Sewing Machine