Home > Do-It-Yourself > Tackers > Hitachi Tackers > Hitachi N5008AF Tacker

Manual Hitachi N5008AF Tacker

Need a manual for your Hitachi N5008AF Tacker? Below you can view and download the PDF manual for free in English. This product currently has 1 frequently asked question, 0 comments and has 0 votes. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

䡬 Wear eye protector.

䡬 Check the retaining screws which fix the exhaust

cover, etc. for tightness.

Check the stapler for air leaks and defective or rusty

parts.

䡬 Check whether or not the push lever works correctly.

Also check whether or not any dirt has adhered to the

moving parts of the push lever.

䡬 Recheck on operational safety.

BEFORE USE

1. Check the air pressure

CAUTION:

The air pressure must be constantly maintained at 4.9

– 8.3 bar (70 – 120 psi.).

Adjust the air pressure between 4.9 to 8.3 bar (70 ~ 120

psi.) according to the diameters and length of staples

and hardness of the wood being stapled. Pay special

attention to the output pressure, capacity, and piping

on the air compressor, so that air pressure does not

exceed the specified limit. Note that excessive pressure

may affect overall performance, service life, and safety.

2. Lubrication

(1) Prior to operating this stapler, be sure to provide an air

set between the air compressor and this device.

Lubrication through the air set offers smooth operation,

extended service life, and anticorrosion.

Adjust the oiler so that a single drop of oil is supplied

at intervals of 5 to 10 stapling cycles.

(2) It is recommended using the recommended oil (SHELL

TONNA). Other applicable oils are listed. Never mix

two or more types of different oils.

3. Load staples

(1) Shift the staple feeder to the rear and engage it with

the groove of the staple guide.

(2) Insert series of staples from the top and feed manually

to the front. Load separated staples so that they are

packed within the magazine cover (Fig. 1)

(3) After loading staples, shift the staple feeder to the rear

to disengage it from the groove and move the staple

feeder so that it secures the staples.

STAPLE SELECTION

Choose a suitable staple from Fig. Staples which are not

shown in Fig. can not be driven with this tool.

STANDARD ACCESSORIES

(1) Hexagon bar wrench for M6 screw ........................... 1

(Attached to body)

(2) Hexagon bar wrench for M5 screw ........................... 1

(3) Eye protector .............................................................. 1

(4) Oiler ............................................................................. 1

(5) Case ............................................................................. 1

OPTIONAL ACCESSORY

䡬 Sequential Trip Mechanism Kit (Code No.881-012)

With the sequential trip mechanism kit, the staple is

driven only by squeezing the trigger after pushing

down the push lever.

By installing these parts, driving staples into improper

positions and unexpected firing of staples caused by

accidental operation of the push lever can be

prevented.

APPLICATIONS

䡬 Construction works such as wall sheathing, roof

decking, subflooring.

䡬 Mobile and modular homes construction.

䡬 Making wooden boxes, and expendable pallets.

PREPARATION PRIOR TO OPERATION

1. Prepare the hose

Be sure to use the hose provided with minimum

6 mm (1/4”) inside diameter.

NOTE:

The air supply hoses must have a minimum working

pressure rating of 12.8 bar (180 psi) or 150 percent of

the maximum pressure produced in the air supply

system, whichever is higher.

2. Check on safety

CAUTIONS:

䡬 Unauthorized persons (including children) must be

kept away from the equipment.

1.4mm

(.055")

32mm(1-1/4")

35mm(1-3/8")

38mm(1-1/2")

41mm(1-5/8")

44mm(1-3/4")

51mm(2")

1.65mm

(.065")

8.3mm

(.327")

Dimensions of nails

Rating

Let us know what you think about the Hitachi N5008AF Tacker by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.

Are you satisfied with the Hitachi N5008AF Tacker?
Yes No

Be the first to rate this product

0 votes

Join the conversation about this product

Here you can share what you think about the Hitachi N5008AF Tacker. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

More about this manual

We understand that it’s nice to have a paper manual for your Hitachi N5008AF Tacker. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Hitachi. They might be able to provide an original manual. Are you looking for the manual of your Hitachi N5008AF Tacker in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

Brand	Hitachi
Model	N5008AF
Category	Tackers
File type	PDF
File size	0.21 MB

All manuals for Hitachi Tackers
More manuals of Tackers

Frequently Asked Questions about Hitachi N5008AF Tacker

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.

Can I store power tools in a shed or garage? Verified

In general, you can store power tools in a shed or garage, even if it sometimes freezes there. However, it is better for the lifespan of the power tool to store it in a dry place without major temperature fluctuations. In a shed or garage, differences in temperature can cause condensation to form, which can cause rust. In addition, tools that run on batteries last shorter and do not charge as well at very low temperatures. To be sure how your power tool needs to be stored, always thoroughly read the user manual.

This was helpful (16) Read more