Manual Hasbro Star Wars Darth Vader Voice Changer

Manual

VOICE BUTTON

VOICE

SWITCH

PHRASES BUTTON

BREATHING BUTTON

VOICE SWITCH

The voice switch has 3 different settings and a “demo” setting. This toy is

packaged in the “demo” setting for in-store demonstration purposes. You

will need to slide the switch to any of the other 3 settings for full activation of

the features. NOTE: Speech function is disabled in “demo” setting.

The mechanism helps you sound like Darth Vader.

To make your voice sound even more like Vader’s,

try this while using the toy:

• Choose a setting: The 3 settings alter your

voice in different ways. Try each setting to see

which one makes your voice sound closest to

the way Darth Vader sounds.

• Listen to the actual phrases to learn the pace

at which Darth Vader speaks.

• Deepen your voice as you talk.

• Talk slowly and clearly.

• Speak into the microphone and get your mouth as close to the

microphone as possible.

VOICE BUTTON

Wearing the headgear and chestplate, press the Voice Button and speak. Your

voice will change, to sound like Darth Vader’s! See the above instructions on

settings and voice adjustment to fine-tune the sound.

PHRASES BUTTON

Wearing the headgear and chestplate, press the Phrase Buttons to hear Darth

Vader’s actual phrases from the movies!

The phrases are: “You don’t know the power of the dark side.”

“There is no escape.”

“The Force is with you.”

“Your powers are weak.”

“Don’t make me destroy you.”

BREATHING BUTTON

Wearing the headgear and chestplate, press the Breathing Button to hear

Darth Vader’s actual breathing sounds from the movies!

AGES 5+

85260

Batteries included. Replace with 3 x 1.5V “AA” or R6 size batteries.

Alkaline batteries recommended. Phillips/cross head screwdriver

(not included) needed to replace batteries.

™

*

Product and colors may vary.

© 2004 Lucaslm Ltd. & ® or TM where indicated.

All rights reserved. Used under authorization.

®* and/or ™* & © 2004 Hasbro. All Rights Reserved.

® denotes Reg. U.S. Pat. & TM Ofce.

*

"DEMO"

SETTING #3

SETTING #1

SETTING #2

®

FCC Statement:

This equipment has been tested and found to comply with the limits

for a Class B digital device, pursuant to part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against

harmful interference in a residential installation. This equipment

generates, uses and can radiate radio frequency energy, and, if not

installed and used in accordance with the instructions, may cause

harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation. If

this equipment does cause harmful interference to radio or television

reception, which can be determined by turning the equipment off and

on, the user is encouraged to try to correct the interference by one or

more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Consult the dealer or an experienced radio/TV technician for help.

IMPORTANT: BATTERY INFORMATION

Please retain this information for future reference.

Batteries should be replaced by an adult.

CAUTION:

1. Always follow the instructions carefully. Use only batteries speci-

fied and be sure to insert them correctly by matching the + and

– polarity markings.

2. Do not mix old batteries and new batteries, or standard (carbon-

zinc) with alkaline batteries.

3. Remove exhausted or dead batteries from the product.

4. Remove batteries if product is not to be played with for a long time.

5. Do not short-circuit the supply terminals.

6. Should this product cause, or be affected by, local electrical

interference, move it away from other electrical equipment. Reset

(switching off and back on again or removing and re-inserting bat-

teries) if necessary.

7. RECHARGEABLE BATTERIES: Do not mix these with any other

types of battery. Always remove from the product before recharg-

ing. Recharge batteries under adult supervision. DO NOT

RECHARGE OTHER TYPES OF BATTERIES.

!

TO REPLACE BATTERIES

CAUTION:

TO AVOID BATTERY LEAKAGE

1. Be sure to insert the batteries correctly

and always follow the toy and battery

manufacturers’ instructions;

2. Do not mix old and new batteries or alkaline,

standard (carbon-zinc) or rechargeable

(nickel-cadmium) batteries;

3. Always remove weak or dead batteries from

the product.

Loosen screw in battery compartment door with a Phillips/cross head

screwdriver (not included). Remove door. Remove and discard batteries. Insert

3 x 1.5V “AA” or R6 size batteries. Alkaline batteries recommended. Replace

door, and tighten screw.

!

WEARING HEADGEAR

Place mask on face. Place helmet straight down on head, aligning rib

inside helmet with indentation on back of mask. Slide helmet forward

until you hear a click (tab on front of helmet will lock into slot between

the eyes in the mask). To remove helmet, lift tab on front of helmet.

1.

HELMET

P/N 6420250001

MASK

RIB

TAB

PRESS IN TO LATCH

PULL OUT TO UNLOCK

2.

VOICE SWITCH (Front View)

CHESTPLATE

(See inset above)

IMPORTANT! PLEASE READ INSTRUCTIONS COMPLETELY BEFORE WEARING TOY.

ADJUSTABLE STRAPS

The mask has adjustable straps on the front, sides and back. To adjust,

lift straps off posts, slide straps to desired position, and press straps

onto posts.

SIDE

SIDE

FRONT

BACK

Rating

More about this manual

We understand that it’s nice to have a paper manual for your Hasbro Star Wars Darth Vader Voice Changer. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Hasbro. They might be able to provide an original manual. Are you looking for the manual of your Hasbro Star Wars Darth Vader Voice Changer in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

All manuals for Hasbro Toys
More manuals of Hasbro