Manual Hasbro Star Wars Darth Vader Lightsaber with Removable Blade
Need a manual for your Hasbro Star Wars Darth Vader Lightsaber with Removable Blade? Below you can view and download the PDF manual for free in English. This product currently has 0 frequently asked questions, 0 comments and has 0 votes. If this is not the manual you want, please contact us.
Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.
Manual
Loading…
FREQUENTLY ASKED QUESTIONS
Q: Is the Force FX Lightsaber a licensed collectible?
A: Yes. The Force FX Lightsaber is a licensed collectible approved and endorsed by Lucasfilm
Ltd. As a collectible, the Force FX Lightsaber is not suitable for children under 14 years of age.
Adult supervision is recommended.
Q: Is the Force FX Lightsaber a limited edition prop replica?
A: No. Although the design of the Force FX Lightsaber is faithful to the look of the movie prop,
it is not an exact replica. The hilt of the Force FX Lightsaber was made slightly larger than the
actual movie prop in order to accommodate the electronics that control the light and sound
effects. The Force FX Lightsaber collectibles are not limited to a pre-determined edition size;
therefore, they are not classified as limited edition replicas.
Q: What is the blade on the Force FX Lightsaber made of?
A: The Force FX Lightsaber features a polycarbonate blade. Once activated, the blade glows
brightly and the replica plays back digitally recorded sound effects taken directly from the film.
Q: Is the blade on the Force FX Lightsaber removable?
A: Yes, the blade is removable; please refer to instructions on this sheet for proper removal.
Q: How do the light and sound effects work in the Force FX Lightsaber?
A: The Force FX Lightsaber incorporates motion sensors, which sense both the motion of the
blade as well as when it comes in contact with something. An on-board, multi-channel chip is
programmed with digital sound effects originally created for the movie by Skywalker Sound.
The Force FX Lightsaber replicates the following sound effects:
• Power-up
• Idle hum
• Swing (with pitch change)
• Clash
• Power-down
Q: How long should the light in the Force FX Lightsaber last?
A: It should run for several hours on a fresh set of batteries. The electronics, if cared for
properly, should last for several thousand hours of use. Replace the batteries whenever the
performance begins to change, such as reduced brightness or volume.
Q: Can I use my Force FX Lightsaber for dueling?
A: No. This product should not be used to strike people or animals. Although the blade is very
durable, it should never be used for fighting or dueling. The Force FX Lightsaber was produced
to be a collectible.
Q: Sometimes I see a dark spot in the middle of the blade. Is there something wrong with the
lightsaber?
A: No. The dark area is actually a result of the design. All the Force FX Lightsabers are
handmade and as a result, this slightly dark area at the middle of the blade is normal. This does
not affect the performance of the lightsaber in any way.
OPERATING INSTRUCTIONS
On/Off
Locate the ON/OFF switch on the control
panel as shown in the diagram. To turn the
lightsaber ON, slide the switch forward,
away from you. To turn the lightsaber OFF,
slide the switch backward, toward you.
BLADE REMOVAL
BLADE REPLACEMENT
BELT CLIP
DISPLAY STAND
The holders on the stand can be positioned differently for multiple
display options.
Unscrew the knob.
(NOTE: the knob is “captive”
and is designed to remain
attached to the sleeve).
Slide the collar off the
blade.
When the hilt and blade are attached: Rest the
hilt in the large groove and the blade in the
small groove.
When the hilt and blade are separated: Rest
the hilt in the LARGE grooves in the front, and
the blade in the SMALL grooves in the back.
Both LARGE grooves in front:
Store the collar or cap and belt clip in the
stand when it’s not being used.
Slide the sleeve off
the blade.
Slide the sleeve off the hilt.
Remove the blade.
Slide the collar onto the
blade.
Attach the the cap.
Slide the sleeve onto the
hilt and tighten the knob.
Unscrew the collar.
Replace the blade in the hilt,
aligning the groove for the
correct position.
Slide the sleeve on the
blade and tighten the knob.
Screw in the collar as you
hold the blade in place and
apply pressure to keep the
blade pressed against the
inside of the hilt.
Unscrew the knob. Unscrew the cap and
remove it from the hilt.
both large front
both small front
both large front
both small front
both large front
both small front
both large front
both small front
1
1
2
3
2
3
4
5
6
7
4
5
6
7
NOTE: The hilt makes “short-circuit”
sounds if you press the button when the
blade is separated from the hilt.
I
II
II
I
III
III
One LARGE groove in front
(Support with “III” marking)
One SMALL groove in front
(Support with “I” and “II” marking)
(Support with “I” and “II” marking)
(Support with “III” marking)
Y K
Customer Code: 5008/94731_94729_SW_vader lightsaber.indd
2010-01-0242/Sunday/2010-01-19/EP1_CT-Coated
Loading…
Rating
Let us know what you think about the Hasbro Star Wars Darth Vader Lightsaber with Removable Blade by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.More about this manual
We understand that it’s nice to have a paper manual for your Hasbro Star Wars Darth Vader Lightsaber with Removable Blade. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Hasbro. They might be able to provide an original manual. Are you looking for the manual of your Hasbro Star Wars Darth Vader Lightsaber with Removable Blade in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.
Specifications
| Brand | Hasbro |
| Model | Star Wars Darth Vader Lightsaber with Removable Blade |
| Category | Toys |
| File type | |
| File size | 2.06 MB |
All manuals for Hasbro Toys
More manuals of Hasbro
Join the conversation about this product
Here you can share what you think about the Hasbro Star Wars Darth Vader Lightsaber with Removable Blade. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.