Manual Hasbro Spider-Man Origins Bump & Go Chopper

Manual

Product and colors may vary.

Spider-Man and all related characters: TM & © 2006 Marvel Characters, Inc. Spider-Man movie elements:

© 2002-2006 Columbia Pictures Industries, Inc. All rights reserved. Licensed by Spider-Man Merchandising L.P.

®* and/or TM* & © 2006 Hasbro. All Rights Reserved.

TM & ® denote U.S. Trademarks.

Hasbro Canada, Longueuil, QC, Canada J4G 1G2

AGES

3+

79040/79037 Asst.

FCC STATEMENT

This device complies with part 15 of the FCC Rules. Operation is subject to the

following two conditions: (1) This device may not cause harmful interference, and (2)

this device must accept any interference received, including interference that may

cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B

digital device, pursuant to part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy, and, if not

installed and used in accordance with the instructions, may cause harmful interference

to radio communications. However, there is no guarantee that interference will not

occur in a particular installation. If this equipment does cause harmful interference to

radio or television reception, which can be determined by turning the equipment off

and on, the user is encouraged to try to correct the interference by one or more of the

following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Consult the dealer or an experienced radio/TV technician for help.

TM

P/N: 6613440000

CAUTION:

1. Always follow the instructions carefully. Use only batteries specified and be sure

to insert item correctly by matching the + and – polarity markings.

2.

Do not mix old batteries and new batteries or standard (carbon-zinc) with alkaline batteries.

3. Remove exhausted or dead batteries from the product.

4. Remove batteries if product is not to be played with for a long time.

5. Do not short circuit the supply terminals.

6. Should this product cause, or be affected by, local electrical interference, move

it away from other electrical equipment. Reset (switching off and back on again or

removing and re-inserting batteries) if necessary.

7. RECHARGEABLE BATTERIES: Do not mix these with any other types of battery.

Always remove from the product before recharging. Recharge batteries under adult

supervision. DO NOT RECHARGE OTHER TYPES OF BATTERIES.

IMPORTANT: BATTERY INFORMATION

Please retain this information for future reference. Batteries should be replaced by an adult.

Class 1 LED product.

Bump & Go Chopper

Battery Symbols

Battery Statements

updated 11.7.05

AAA AA C D 9.5V

CR2032

A76/LR44

BATTERIES

INCLUDED

Replace with 3 x 3.0V

“CR2032” lithium

batteries. Phillips/cross

head screwdriver (not

included) needed to

replace batteries.

x3

CR2032 Lithium

BATTERIES INCLUDED

Replace with 3 x 3.0V “CR2032” lithium batteries.

Phillips/cross head screwdriver (not included)

needed to replace batteries.

x3

CR2032 Lithium

BATTERIES INCLUDED

Replace with 3 x 3.0V “CR2032” lithium batteries. Phillips/cross

head screwdriver (not included) needed to replace batteries.

x3

CR2032 Lithium

PRODUCTS THAT DO NOT INCLUDE BATTERIES:

Products that do NOT include but require AAA, AA, C, D, 9V

batteries should declare that alkaline ("LR") type batteries

are recommended.

Motorized products that do NOT include but require AAA, AA, C,

D, batteries should declare that alkaline ("LR") type batteries

are required.

PRODUCTS THAT INCLUDE BATTERIES:

Products that include AAA, AA, C, D, 9V batteries should declare

that batteries are included and recommend replacement with

alkaline batteries.

PRODUCTS THAT INCLUDE BUTTON CELLS:

Products that include CR2032 or CR2016 button cell batteries

should have the following battery statement:

Motorized products that include AAA, AA, C, D, 9V batteries should

declare that batteries are included and replacement with alkaline

batteries is required.

Products that include A76/LR44 button cell batteries should have

the following battery statement:

BATTERIES

INCLUDED

Replace with 3 x 1.5V

“A76” or LR44 size

alkaline batteries.

Phillips/cross head

screwdriver (not

included) needed to

replace batteries.

x3

A76/LR44 Alkaline

BATTERIES INCLUDED

Replace with 3 x 1.5V “A76” or LR44 size alkaline batteries.

Phillips/cross head screwdriver (not included) needed to

replace batteries.

x3

A76/LR44 Alkaline

BATTERIES INCLUDED

Replace with 2 x 1.5V “A76” or LR44 size alkaline batteries.

Phillips/cross head screwdriver (not included) needed to replace batteries.

x2

A76/LR44 Alkaline

BATTERIES INCLUDED

Replace with 3 x 1.5V “A76” or LR44 size alkaline

batteries. Phillips/cross head screwdriver (not

included) needed to replace batteries.

x3

CR2032 Lithium

BATTERIES INCLUDED

BATTERIES

REQUIRED

x3

1.5V AAA

R03 size

Alkaline batteries

recommended.

Phillips/cross head

screwdriver (not included)

needed to insert batteries.

NOT INCLUDED

x3

BATTERIES REQUIRED

1.5V AAA/R03 size

Alkaline batteries recommended.Phillips/cross

head screwdriver (not included) needed to

insert batteries.

NOT INCLUDED

BATTERIES REQUIRED

x3

1.5V AAA/R03 size

Alkaline batteries recommended. Phillips/cross head

screwdriver (not included) needed to insert batteries.

NOT INCLUDED

BATTERIES

REQUIRED

x3

1.5V AAA

R03 size

Alkaline batteries

recommended.

Phillips/cross head

screwdriver

(not included)

needed to insert

batteries.

NOT INCLUDED

BATTERIES

INCLUDED

x3

1.5V AAA/R03 size

Replace with 3 x 1.5V “AAA”

or R03 size batteries.

Alkaline batteries recommended.

Phillips/cross head screwdriver

(not included) needed to

insert batteries.

x3

BATTERIES INCLUDED

1.5V AAA/R03 size

Replace with 3 x 1.5V “AAA” or R03 size batteries.

Alkaline batteries recommended. Phillips/cross head

screwdriver (not included) needed to insert batteries.

x2

BATTERIES INCLUDED

1.5V AA/R6 size

Replace with 2 x 1.5V “AA” or R6 size batteries.

Alkaline batteries recommended. Phillips/cross head

screwdriver (not included) needed to insert batteries.

BATTERIES INCLUDED

x3

1.5V AAA/R03 size

Replace with 3 x 1.5V “AAA” or R03 size batteries.

Alkaline batteries recommended. Phillips/cross head

screwdriver (not included) needed to insert batteries.

BATTERIES

INCLUDED

x3

1.5V AAA

R03 size

Replace with 3 x

1.5V “AAA” or R03

size batteries.

Alkaline batteries

recommended.

Phillips/cross head

screwdriver

(not included) needed

to insert batteries.

BATTERIES

ALKALINE

REQUIRED

x3

1.5V AAA

LR03 size

Phillips/cross head

screwdriver (not included)

needed to insert batteries.

NOT INCLUDED

x3

BATTERIES

ALKALINE

REQUIRED

1.5V AAA/LR03 size

Phillips/cross head screwdriver (not included)

needed to insert batteries.

NOT INCLUDED

x3

1.5V AAA/LR03 size

Phillips/cross head screwdriver (not included) needed

to insert batteries.

NOT INCLUDED

ALKALINE BATTERIES REQUIRED

x3

1.5V AAA

LR03 size

Phillips/cross head

screwdriver

(not included)

needed to insert

batteries.

BATTERIES

ALKALINE

REQUIRED

NOT INCLUDED

BATTERIES

INCLUDED

x3

Replace with 3 x 1.5V “AAA”

or LR03 size alkaline batteries .

Phillips/cross head screwdriver

(not included) needed to insert

batteries.

BATTERIES

INCLUDED

x4

Replace with 4 x 1.5V “AA”

or LR6 size alkaline batteries .

Phillips/cross head screwdriver

(not included) needed to insert

batteries.

x3

BATTERIES INCLUDED

Replace with 3 x 1.5V “AAA” or LR0.3 size alkaline

batteries . Phillips/cross head screwdriver (not included)

needed to insert batteries.

BATTERIES INCLUDED

x3

Replace with 3 x 1.5V “AAA” or LR03 size alkaline batteries . Phillips/cross head screwdriver

(not included) needed to insert batteries.

BATTERIES

INCLUDED

x3

Replace with 3 x 1.5V

“AAA” or LR03 size

alkaline batteries .

Phillips/cross head

screwdriver (not

included) needed to

insert batteries.

x2

BATTERIES

ALKALINE

REQUIRED

1.5V AA/LR6 size

Phillips/cross head screwdriver (not included)

needed to insert batteries.

NOT INCLUDED

Replace with 2 x 1.5V “A76” or LR44 button cell

batteries. Phillips/cross head screwdriver (not

included) needed to replace batteries.

x2

A76/LR44 Alkaline

BATTERIES INCLUDED

To install batteries:

1. Using a Phillips/cross head

screwdriver (not included),

unscrew battery cover.

2. Insert 2 fresh 1.5 V “AA”

or LR6 batteries. See diagram

for polarity.

3. Replace battery cover and

tighten screw.

®

*

CAUTION: TO AVOID BATTERY LEAKAGE

1. Be sure to insert the batteries correctly and always follow the toy and

battery manufacturers’ instructions;

2. Do not mix old and new batteries or alkaline, standard (carbon-zinc)

or rechargeable (nickel-cadmium) batteries;

3. Always remove weak or dead batteries from the product.

Not suitable for children

under 3 years because of

small parts, choking hazard.

Rating

More about this manual

We understand that it’s nice to have a paper manual for your Hasbro Spider-Man Origins Bump & Go Chopper. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Hasbro. They might be able to provide an original manual. Are you looking for the manual of your Hasbro Spider-Man Origins Bump & Go Chopper in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

All manuals for Hasbro Toys
More manuals of Hasbro