Home > Do-It-Yourself > Bandsaws > Grizzly Bandsaws > Grizzly G0555 Bandsaw

Manual Grizzly G0555 Bandsaw

Need a manual for your Grizzly G0555 Bandsaw? Below you can view and download the PDF manual for free in English. This product currently has 0 frequently asked questions, 0 comments and has 0 votes. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

Model G0555/G0555P (Mfg. Since 5/11)

-9-

SECTION 2: POWER SUPPLY

Full-Load Current Rating

The full-load current rating is the amperage a

machine draws at 100% of the rated output power.

On machines with multiple motors, this is the

amperage drawn by the largest motor or sum of all

motors and electrical devices that might operate

at one time during normal operations.

Full-Load Current Rating at 110V ...... 11 Amps

Full-Load Current Rating at 220V .... 5.5 Amps

The full-load current is not the maximum amount

of amps that the machine will draw. If the machine

is overloaded, it will draw additional amps beyond

the full-load rating.

If the machine is overloaded for a sufficient length

of time, damage, overheating, or fire may result—

especially if connected to an undersized circuit.

To reduce the risk of these hazards, avoid over-

loading the machine during operation and make

sure it is connected to a power supply circuit that

meets the specified circuit requirements.

For your own safety and protection of

property, consult an electrician if you are

unsure about wiring practices or electrical

codes in your area.

A power supply circuit includes all electrical

equipment between the breaker box or fuse panel

in the building and the machine. The power sup-

ply circuit used for this machine must be sized to

safely handle the full-load current drawn from the

machine for an extended period of time. (If this

machine is connected to a circuit protected by

fuses, use a time delay fuse marked D.)

Circuit Information

Note: Circuit requirements in this manual apply to

a dedicated circuit—where only one machine will

be running on the circuit at a time. If machine will

be connected to a shared circuit where multiple

machines may be running at the same time, con-

sult an electrician or qualified service personnel to

ensure circuit is properly sized for safe operation.

Circuit Requirements for 220V

Nominal Voltage .............................. 220V/240V

Cycle ..........................................................60 Hz

Phase ........................................... Single-Phase

Circuit Rating ...................................... 15 Amps

Plug/Receptacle ............................. NEMA 6-15

This machine can be converted to operate on a

220V power supply (refer to Voltage Conversion

instructions). This power supply must have a veri-

fied ground and meet the following requirements:

This machine is prewired to operate on a 110V

power supply circuit that has a verified ground and

meets the following requirements:

Circuit Requirements for 110V

Nominal Voltage ...............................110V/120V

Cycle ..........................................................60 Hz

Phase ........................................... Single-Phase

Circuit Rating ...................................... 15 Amps

Plug/Receptacle ............................. NEMA 5-15

Availability

Before installing the machine, consider the avail-

ability and proximity of the required power supply

circuit. If an existing circuit does not meet the

requirements for this machine, a new circuit must

be installed. To minimize the risk of electrocution,

fire, or equipment damage, installation work and

electrical wiring must be done by an electrician or

qualified service personnel in accordance with all

applicable codes and standards.

Electrocution, fire, shock,

or equipment damage

may occur if machine is

not properly grounded

and connected to power

supply.

Rating

Let us know what you think about the Grizzly G0555 Bandsaw by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.

Are you satisfied with the Grizzly G0555 Bandsaw?
Yes No

Be the first to rate this product

0 votes

Join the conversation about this product

Here you can share what you think about the Grizzly G0555 Bandsaw. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

More about this manual

We understand that it’s nice to have a paper manual for your Grizzly G0555 Bandsaw. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Grizzly. They might be able to provide an original manual. Are you looking for the manual of your Grizzly G0555 Bandsaw in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.