Manual Gorenje DT9640X Cooker Hood

Manual

10

air supply the negative pressure of not more than 0.004 milibar is maintained at the location of these devices

inside the room (this point does not apply when the hood is used as an odour absorber).

9. When connecting to 230V power supply network use an electric socket in working order

To install the hood proceed as follows:

1. Install the wall hanger [D] at the appropriate level.

2. Hang the hood body [C] on the hanger [D]

3. Connect the hood to the ventilation duct.

4. Connect the hood to the power network.

5. Install the wall hanger [E] at the appropriate level.

6. Install the telescopic column of the masking cover.

a) Trace a vertical line on the wall to indicate the center of the cooker plate,

b) Hold a hood hanger profile [D] to the wall (Fig. 3), set it symmetrically in relation to the central

line, with the distance between the holes in the profile and the cooker plate amounting to min. 960

mm, level the profile preliminarily, indicate the spacing of mounting holes on the wall,

c) Drill the holes as indicated on the wall, using drills of diameter corresponding to the attached

expansion plugs, drive the plugs in and then screw the hanger profile to the wall

a) Hang the hood body on the installed hanger [D], level it with adjusting screws [J] and then tighten the

screw [I] preventing the hood from sliding off the hanger,

b) If required, install the appropriate conduit for discharge of air to a ventilation duct,

c) Attach the telescoping column of the masking cover [A and B] on the mounted hood (Fig. 1)

d) Extend the top masking cover [N] (Fig. 4) to the required height, indicate its max. reach on the center

line, remove the cover,

e) Hold the hanger of the top masking cover [E] at the center line, at a distance of 65 mm from the

indicated point of max. reach (Fig. 4), indicate the mounting holes on the wall and install the hanger as

described under d). Install the air guide [F] if required (Fig. 4), using the same mounting screws,

f) Install the masking cover column again and, using apprpriate screws, fix it to the bottom masking cover

and the top hanger profile,

g) Connect the hood to the power supply network.

After connecting the device to the power supply network (in accordance with the requirements defined

above) it is necessary to check the lighting of the hood and whether its motor works correctly.

The wall socket shall be accessible for disconnecting the plug after the hood is installed.

V. Installation

1. Installation of the wall hanger

2.

Installation of the hood

3. Connecting to the power network and operation check

4. Setting the operation mode of the kitchen extractor hood

Rating

More about this manual

We understand that it’s nice to have a paper manual for your Gorenje DT9640X Cooker Hood. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Gorenje. They might be able to provide an original manual. Are you looking for the manual of your Gorenje DT9640X Cooker Hood in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

All manuals for Gorenje Cooker Hoods
More manuals of Cooker Hoods

Frequently Asked Questions about Gorenje DT9640X Cooker Hood

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.

Related products

Manual

Gorenje WHI621E1XGB Cooker Hood

Manual

Gorenje IHT943E6XGB Cooker Hood

Manual

Gorenje DKGO600E Cooker Hood

Manual

Gorenje WHU629AX/M Cooker Hood

Manual

Gorenje WHI961S2X Cooker Hood

Manual

Gorenje WHI951S1XGB Cooker Hood

Manual

Gorenje BHI633EB Cooker Hood

Manual

Gorenje TH60E3B Cooker Hood

Related categories