Home > Household appliances > Cooker Hoods > GE Cooker Hoods > GE JV356VBB30 Cooker Hood

Manual GE JV356VBB30 Cooker Hood

Need a manual for your GE JV356VBB30 Cooker Hood? Below you can view and download the PDF manual for free in English. This product currently has 3 frequently asked questions, 0 comments and has 0 votes. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

Venting

This hood must be vented vertically through

upper cabinets or horizontally through an outside

wall. Ductwork is not included.

Improper duct sizing or restrictive roof caps

reduce air moving capacity and will not provide

enough ventilation for an indoor electric grill.

Indoor electric grills produce more smoke than

normal cooking and require at least 410 CFM to

provide adequate ventilation.

Follow the guidelines for proper duct sizing in the

ducting charts. NOTE: The venting system must

exhaust to the outside.

Cabinet Height

For most efficient operation, the top of the hood should

be approximately 66″ (167.6 cm) from the floor.

Non-Venting

Follow the instructions under “Vented Installation” for

wiring and mounting. Omit the ductwork preparation.

Install WB13X5008–Charcoal filter pads replaceable.)

Tools Required:

• Drill; 1

⁄

″ wood bit. • Pliers.

• Flat blade screwdriver.• Pencil, ruler and level.

• Saber saw or keyhole saw.

• Caulking, metal snips, duct tape, ducts (with

elbow and transition, if necessary) and wall cap

or roof caps, as required.

INSTALLATION INSTRUCTIONS

Installing the Range Hood

Determine which direction the vent will be

installed (top or rear).

1. Remove filters and motor/light cover (3 screws).

2. Remove the blower motor by removing the

“packing screw” and the clip on the retainer bar.

Discard the clip and screw.

Unplug the motor from the junction box.

Snap the blower retainer

bar toward the rear of

the hood to release the

blower. Remove the

blower.

3. Remove the junction

box cover.

Remove the selected wiring knockout and duct

knockout from the top or rear of the hood. Use a

flat blade screwdriver to cut the tabs.

IMPORTANT: OBSERVE ALL GOVERNING

CODES AND ORDINANCES.

SAVE THESE INSTRUCTIONS FOR THE

LOCAL ELECTRICAL INSPECTOR’S USE.

WARNING: Disconnect power before servicing or cleaning the unit.

Care of Filter Care of Exterior Surfaces Charcoal Filter Pads

(not included)

For greatest efficiency the aluminum

filter should be cleaned periodically.

To remove the filter, pull the tab to

the side and then down. Soak it in hot

water and detergent. Rinse and dry

thoroughly before replacing.

Use a mild detergent to clean the hood.

DO NOT use abrasive cleansers.

Lights

This hood has two lights. Do not use

bulbs larger than 75 watts. There are

two light levels. To change light

bulbs, first remove the filters. It is not

necessary to remove the blower cover.

This filter should be inspected

periodically and, when it becomes

saturated, it should be replaced. There

are no effective means of reactivating

this filter. Order WB13X5008.

Top Vent

Knockout

Snap

lock blower

retainer bar

Vent-less operation discharge vent

Rating

Let us know what you think about the GE JV356VBB30 Cooker Hood by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.

Are you satisfied with the GE JV356VBB30 Cooker Hood?
Yes No

Be the first to rate this product

0 votes

Join the conversation about this product

Here you can share what you think about the GE JV356VBB30 Cooker Hood. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

More about this manual

We understand that it’s nice to have a paper manual for your GE JV356VBB30 Cooker Hood. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact GE. They might be able to provide an original manual. Are you looking for the manual of your GE JV356VBB30 Cooker Hood in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

Brand	GE
Model	JV356VBB30
Category	Cooker Hoods
File type	PDF
File size	0.14 MB

All manuals for GE Cooker Hoods
More manuals of Cooker Hoods

Frequently Asked Questions about GE JV356VBB30 Cooker Hood

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.

How much distance should there be between my cooker hood and my hob? Verified

This can very a bit depending on the brand, but in general a cooker hood should be placed at least 65 centimeter above a gas hob and at least 50 centimeter above an electric or induction hob. This is to improve fire safety

This was helpful (1215) Read more

Do I need a cooker hood with or without motor? Verified

Cooker Hoods with motor are meant for when the air is moved directly outside. A cooker hood without motor is meant for when there is a central ventilation system. Never connect a cooker hood with motor to a central ventilation system!

This was helpful (637) Read more

Can my GE appliance also run on a generator? Verified

In general this is possible, but always check this with the manufacturer of your generator. Also be aware that some appliances require a lot of power when starting up (ie: refrigerators, freezers and air conditioners). It's also a good idea to use a generator that is voltage regulated and surge protected. When in doubt you should contact the manufacturer.

This was helpful (38) Read more