Manual First Austria FA-6401-1 Kitchen Scale

Manual

2 3

INSTRUCTION MANUAL

INSTRUCTION

Please read this instruction carefully in order to

use the scale correctly & keep the scale in good

condition.

FEATURES

1. Indicate volume of water and milk

2. Two weight unit systems g/lb:oz convertible

3. Two volume unit systems ml/’oz convertible

4. Low battery power/Overload indication

5. With high precision strain gauge sensor

6. With tare function

7. Auto off

BATTERY

1 pc lithium battery (CR2032)

Please remove the isolation

sheet from battery contact

before use. Please observe the

polarity.

TO REPLACE BATTERY

1. Open battery case cover on

the back of scale.

2. Bend the small black tab

outwards and the battery will

come out. Take note not to

bend the contact.

3. Install new battery by putting one side

of battery beneath the contact and then

pressing down the other side.

LCD

WORKING MODES

UNIT CONVERSION BUTTON

At the bottom of scale, you can

nd a unit conversion button as

shown in picture.

TO CONVERT WEIGHT UNIT

If the scale is with both unit systems of Metric (g,

ml) or Imperial (lb:oz, ’oz), press MODE button

to choose working mode (weight, milk volume,

water volume), then press

unit conversion

button to convert between two systems. Take

the conversion of weight unit for example: (see

g. 1)

* When setting g as weight unit, the default

volume unit is ml;

* When setting lb: oz as weight unit, the default

volume unit is ’oz.

Remark: The unit system of scale depends

on sales destination or the requirement of

distributor.

TO START WEIGHING



A. Place the scale on a solid and at surface.

B. Place bowl (if used) on the scale before

turning on the scale.

C. Press „ON/OFF“ to enter weighing mode.

D. Wait until LCD shows all information.

E. Load weighing object on to start weighing,

LCD wil l show the weight reading.

F. If the weighing object is water or milk, press

MODE button to choose volume mode and

view the volume of weighing object.

(see g. 3)

A. Place the scale on a solid and at surface.

B. Press“ON/OFF“ to turn on the scale.

C. Wait until LCD shows „0“, and press MODE

button to choose „Water“ or „Milk“ mode.

D. Put a liquid container onto the scale platform.

E. Press ZERO button to reset LCD to „0“.

F. Pour liquid (water or milk) into the container,

LCD shows the volume of the liquid.

G. Press MODE button to choose „Weight“

mode and view the weight of liquid.

„ZERO“ OR „TARE“ FUNCTION

To weigh different loads consecutively without

removing loads from the scale. Put rst Load

on the scale, get weight reading. Press ZERO

button to reset the LCD reading to „0“ before

adding next load. You can repeat this operation.

(see g. 4)







LCD will show „0“ each time ZERO is pressed.

Icon „0“ will show on lower left corner of LCD,

indicating „ZERO“ function is active. Max. weight

capacity remains unchanged.

(see g. 5)







LCD will show „0“ each time ZERO is pressed.

Icon „T“ will show on upper left corner of LCD,

indicating „TARE“ function is active. Max. weight

capacity is reduced by total weight of all loads.



By pressing ZERO, you can see the total weight

of all loads on the scale. If you want to weigh

more loads, just press ZERO to reset LCD

reading to ‚0‘ again.

AUTO SHUT OFF

Auto shut-off occurs if display

shows ‚0‘ or shows the same

weight reading for 2 minutes.

MANUAL SHUT OFF

To maximize battery life, always

press ON/OFF again to turn off

the scale after using.

Note: when display shows „0“,

press „ON/OFF“ to turn off the

scale; when display shows weight reading, press

„ON/OFF“ for 3 seconds to turn off the scale.

WARNING INDICATORS

1. Replace new battery.

2. Scale overload. Remove

item to avoid damage. Max.

weight capacity is indicated

on the scale.

CLEANING AND CARE

1. Clean the scale with a slightly damp cloth.

DO NOT immerse the scale in water or use

chemical/abrasive cleaning agents.

2. All plastic parts should be cleaned

immediately after contact with fats, spices,

vinegar and strongly avored/colored foods.

Avoid contact with acids citrus juices.

3. Always use the scale on a hard, at surface.

DO NOT use on carpet.

ENGLISH

ENGLISH

N

i

1



3

4 

M_6400-1_6400_01_v02.indd 2-3 12-9-5 下午6:14

Rating

More about this manual

We understand that it’s nice to have a paper manual for your First Austria FA-6401-1 Kitchen Scale. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact First Austria. They might be able to provide an original manual. Are you looking for the manual of your First Austria FA-6401-1 Kitchen Scale in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

All manuals for First Austria Kitchen Scales
More manuals of Kitchen Scales

Frequently Asked Questions about First Austria FA-6401-1 Kitchen Scale

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.

Related products

Manual

First Austria FA-6408 Kitchen Scale

Manual

First Austria FA-6407-1 Kitchen Scale

Manual

First Austria FA-6410 Kitchen Scale

Manual

First Austria FA-6401 Kitchen Scale

Manual

First Austria FA-6400 Kitchen Scale

Manual

Kooper 5918843 Kitchen Scale

Manual

TM Electron TMPBS023 Kitchen Scale

Manual

Home HG M 15 Kitchen Scale

Related categories