Manual First Austria FA-5140-1 Meat Grinder

Manual

2 3

MEAT GRINDER

INSTRUCTION MANUAL

DESCRIPTION

(g. 1)

IMPORTANT SAFEGUARD

• Home use only. Do not use for industrial purpose.

• Unplug when assembling and disassembling the unit.

• Close supervision is necessary when any appliance is used near children.

• When carrying the unit be sure to hold the head with one hand, and the back knob with the

other hand. Do not carry the unit by the hopper plate or head.

• Do not x the cutting blade and cutting plate when using kibbe attachment.

• Under load continuous running of meat grinder should be not more than 10-15 minutes with

the following 10 minutes interval for motor cooling.

• To avoid jamming, do not force to operate the unit with excessive pressure.

• Never try to replace the parts and repair the unit by yourself.

• This appliance is not intended for use by persons (including children) with reduced physical,

sensory or mental capabilities, or lack of experience and knowledge, unless they have been

given supervision or instruction concerning use of the appliance by a person responsible for

their safety.

• Children should be supervised to ensure that they do not play with the appliance.

BEFORE THE FIRST USING

• Check that voltage indicated on the rating label corresponds the mains voltage in your home.

• Wash all parts (except body) in warm soapy water.

• Before plugging in, ensure the switch is in „Stop“ position.

• Never try to replace the parts and repair the unit by yourself.

INSTRUCTION FOR USING

ASSEMBLING

• Press the fasten button, hold the head and insert it into the inlet (when inserting please pay

attention the head must be slanted as per arrow indicated on the top), then move the head

anticlockwise so that the head being fastened tightly. (g. 2)

• Place the snake into the head, long end rst, and turn to feed the screw slightly until it is set

into the motor housing (g. 3).

• Place the cutting blade onto the snake shaft with the blade facing the front as illustrated. If it

is not tted properly, meat will not be grinded (g. 4).

• Place the desired cutting plate next to the cutting blade, tting protrusions in the slot (g. 5).

• Screw the xing ring tight. Do not over tighten (g. 6).

• Place the hopper plate on the head and x it into position.

• Locate the unit on a rm place.

• The air passage at the bottom and the side of the motor housing should be kept free and not

blocked.

MINCING MEAT

• Cut all foods into pieces so that they t easily into the hopper opening.

• Plug the unit on and switch it on.

• Feed foods into the hopper plate. Use for it only the food pusher (g. 7).

• After use switch the unit off and unplug it from the power supply.

REVERSE FUNCTION

• If blockade is happened, direct press “REVERSE” for 3-6 seconds.

• Snake will be rotating in the opposite direction, and the head will get empty.

• If it doesn‘t work, switch off the unit and clean it.

MAKING KIBBE

• Mince meat three times and mix all ingredients together in a bowl. More meat and less our

for outlet cover create better consistency and taste.

• Grind the mixture three times.

• Disassemble by reversing the steps form assembling 5-3 to remove the cutting plate and

cutting blade

• Place kibbe attachments A and B onto the feed screw shaft together, tting protrusions in the

slots. (g. 8)

• Screw cap into place until tight. Do not over tighten (g. 9).

• Make the cylindrical outlet cover (g. 10).

• Form kibbe as illustrated below and deep fry.

SAUSAGE ATTACHMENT (see g. 11)

CLEANING AND MAINTENANCE

DISASSEMBLING

• Make sure that the motor has stopped completely.

• Disconnect the plug from the power outlet.

• Disassemble by reversing the steps from assembling.

CLEANING

• Remove meat, etc.

• Wash each part in warm soapy water.

• A bleaching solution containing chlorine will discolor aluminum surfaces.

• Do not immerse the motor housing in water, but only wipe it with a damp cloth.

• Thinners and petrol will crack of change the color of the unit.

• Wipe all the cutting parts by vegetable oil-wet cloth.

SPECIFICATION

Rating: 220-240V, 50/60Hz

Total Electric absorber Power: 500W, 1200W max

ENGLISH

ENGLISH

1. Stop & Reset

2. On1

3. On2

4. Reverse switch

5. Body

6. Storage box

7. Locking knob

8. Head inlet

9. Head

10. Hopper plate

11. Food pusher

12. Snake

13. Cutting blade

14. Cutting plate (ne)

15. Cutting plate (Medium)

16. Cutting plate (large)

17. Fixing ring

18. Kibbe attachment

19. Sausage attachment

M_5140-1_v02.indd 2-3 12-12-17 下午3:31

Rating

More about this manual

We understand that it’s nice to have a paper manual for your First Austria FA-5140-1 Meat Grinder. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact First Austria. They might be able to provide an original manual. Are you looking for the manual of your First Austria FA-5140-1 Meat Grinder in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

All manuals for First Austria Meat Grinders
More manuals of Meat Grinders

Frequently Asked Questions about First Austria FA-5140-1 Meat Grinder

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.

Related products

Manual

First Austria FA-5141-1 Meat Grinder

Manual

First Austria FA-5140 Meat Grinder

Manual

First Austria FA-5140-2 Meat Grinder

Manual

First Austria FA-5143-1 Meat Grinder

Manual

First Austria FA-5140-4 Meat Grinder

Manual

Gesame GP-32 Meat Grinder

Manual

Gorenje MG1601W Meat Grinder

Manual

Bartscher AB12/L Meat Grinder

Related categories