Home > Do-It-Yourself > Wall Chasers > FERM Wall Chasers > FERM WSM4002 Wall Chaser

Manual FERM WSM4002 Wall Chaser

Need a manual for your FERM WSM4002 Wall Chaser? Below you can view and download the PDF manual for free in English. This product currently has 1 frequently asked question, 0 comments and has 0 votes. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

0310-16

Overheating

- The ventilation slots are blocked with dirt.Clean with

dry cloth.

- The machine does not start when switched on. Check

the mains lead and the fuse/plug.Take to your Ferm

Dealer for repair

- The motor is defective.Take to your Ferm Dealer.

MAINTAIN TOOLS WITH CARE

Keep the tool clean for better and safer performance.

Store the discs properly in accordance with the maker’s

instructions.

Follow instructions for changing accessories.Inspect tool

and extension cables periodically and if damaged, have

them repaired by a qualified person or authorised service

body.Keep handles free from oil or grease.Keep the venti-

lation slots clean to prevent motor overheating.

Check for damaged parts

Do not use a tool with damaged parts,before further use a

damaged tool must be carefully checked by a qualified per-

son to determine that it will operate properly.Check for

alignment of moving parts, binding or breakage of parts,

mounting and other conditions that may affect its opera-

tion.

A damaged part or guard should be properly repaired by

an authorised service centre, unless indicated otherwise

in the instruction manual.Have defective switches repla-

ced by an authorised service centre. Do not use a tool if

the switch does not turn on and off.

Have your tool repaired by an expert

This appliance is manufactured in accordance with rele-

vant safety standards.Only experts must carry out repai-

ring of electrical appliances,otherwise considerable dan-

ger for the user may result.

Storing tools

When not in use tools should be stored in the dry,out of

reach of children.

ELECTRICAL INFORMATION

This product is complete with a pre-wired mains plug,it is

double insulated in accordance with EN 50144 – no earth

wire is required

If the plug needs replacing follow these instructions.

Wire correctly

The wires in the mains lead are coloured in the following

way:

BLUE -Neutral

BROWN -Live

Securing wires

Secure wires carefully and firmly to the correct terminals.

Secure the mains cable in the plug cord grip firmly.

Fit a 13-amp fuse. If a 13amp (BS1363) plug is used a (BS

1362) ASTA approved 13-amp fuse must be fitted.

Recycle/Dispose of old plug and cable

Prevent inadvertent connection to socket and risk of elec-

tric shock.

ENVIRONMENT

Recycle the packaging according to the identification

marks on it.

At the end of the product or its accessories life please re-

cycle where facilities exist - phone the Helpline for cur-

rent advice on recycling.

Helpline

For any questions relating to operational or safety

matters contact:

Ferm Customer Helpline on: 0115 966 1199

Monday-Friday 8am – 6pm

Saturday 9am – 1 pm

GUARANTEE

The guarantee conditions can be found on the separately

enclosed guarantee card.

We declare under our sole responsibility that this

product is in conformity with the following

standards or standardized documents

EN-50144-1,prEN50144-2-3,

EN-55014-1,EN-55014-2,

EN61000-3-2,EN61000-3-3,

in accordance with the regulations:

98/37/EEC

73/23/EEC

89/336/EEC

from 01-12-2001

GENEMUIDEN NL

W. Kamphof

Quality department

DECLARATION OF CONFORMITY

(

)

Blue

(Neutral)

Green & Yellow

(Earth)

Brown

(Live)

Fuse

(13 Amp)

INSTRUCTIONS FOR USE

FWS-125KN

WALL CHASER

Art.nr. WSM4002

Rating

Let us know what you think about the FERM WSM4002 Wall Chaser by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.

Are you satisfied with the FERM WSM4002 Wall Chaser?
Yes No

Be the first to rate this product

0 votes

Join the conversation about this product

Here you can share what you think about the FERM WSM4002 Wall Chaser. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

More about this manual

We understand that it’s nice to have a paper manual for your FERM WSM4002 Wall Chaser. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact FERM. They might be able to provide an original manual. Are you looking for the manual of your FERM WSM4002 Wall Chaser in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

Brand	FERM
Model	WSM4002
Category	Wall Chasers
File type	PDF
File size	1.44 MB

All manuals for FERM Wall Chasers
More manuals of Wall Chasers

Frequently Asked Questions about FERM WSM4002 Wall Chaser

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.

Can I store power tools in a shed or garage? Verified

In general, you can store power tools in a shed or garage, even if it sometimes freezes there. However, it is better for the lifespan of the power tool to store it in a dry place without major temperature fluctuations. In a shed or garage, differences in temperature can cause condensation to form, which can cause rust. In addition, tools that run on batteries last shorter and do not charge as well at very low temperatures. To be sure how your power tool needs to be stored, always thoroughly read the user manual.

This was helpful (14) Read more