Home > Do-It-Yourself > Drill Presses > FERM Drill Presses > FERM TDM1010 Drill Press

Manual FERM TDM1010 Drill Press

Need a manual for your FERM TDM1010 Drill Press? Below you can view and download the PDF manual for free in English. This product currently has 1 frequently asked question, 0 comments and has 0 votes. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

54 Ferm

SPARE PARTS LIST FTB-16

REF NR DESCRIPTION FERM NR

28 SPRING-TERSION 311106

29 CAP-SPRING 311107

38 MOTOR 311103

59 V-BELT 311104

2 RACK 311108

64 SWITCH 311105

79 KEY-DRIFT 311109

10 ARBOR 311110

11 CHUCK 311111

FLOOR PILLAR DRILL

THE NUMBERS IN THE FOLLOWING TEXT COR-

RESPOND WITH THE PICTURES AT PAGE 2

TECHNICAL SPECIFICATIONS

PRODUCT INFORMATION

Fig.A

1. On/off switch

2. Drill depth gauge

3. Protection guard

4. Motor

5. Drill depth lever

6. Table adjustment

Check first whether or not the delivery has been dama-

ged by transport and/or whether all the parts are pre-

sent.

SAFETY INSTRUCTIONS

The following pictograms are used in these instructions

for use:

Denotes risk of personal injury, loss of life or

damage to the tool in case of non-observance of the

instructions in this manual.

Denotes risk of electric shock.

Carefully read this manual before using the machine.

Make sure that you know how the machine functions and

how to operate it. Maintain the machine in accordance

with the instructions to make sure it functions properly.

Keep this manual and the enclosed documentation with

the machine.

When using electric machines always observe the

safety regulations applicable in your country to

reduce the risk of fire, electric shock and personal

injury. Read the following safety instructions and

also the enclosed safety instructions.

Keep these instructions in a safe place!

Before using the machine the guidelines must be taken

into consideration. Every mechanical or electrical altera-

tion to the machine which does not meet the applicable

guidelines carries a considerable accident risk.

DURING USE THE FOLLOWING POINTS

MUST BE CONSIDERED:

• Do not remove any mechanical or electrical protec-

tive provisions.

• Check whether all the protective provisions are in

place and have been attached correctly.

• Wear safety goggles during drilling.

• If you have long hair, be sure to wear hair protection

(hair net or cap). Long hair can easily be caught in

moving parts.

• Wear fitted clothing; tie buttons on sleeves.

• Do not hold any workpieces in your hands when dril-

ling. Always use a machine clamp or another clamping

tool.

• Protect workpieces and clamping tools on the bench

to prevent them from getting caught. Fasten them

yourself with screws or clamp them to a machine

clamp fastened to the table.

• Check whether the drill holder is tightened properly.

• Check whether cable lead-throughs are okay.

• To remove drill chips only use hand brushes, brushes,

rubber wipers, chip hooks or similar aids.

• Do not carry out any cleaning or greasing work while

the machine is in operation.

• Always keep V-belts covered (so that your hands

cannot become caught).

• Only tighten the toothed ring drill holder by means of

the wrench.

• Never leave the wrench of the drill holder in the drill

holder! Before switching on the machine, check

whether the wrench really has been removed!

• Do not use any drills which are damaged on the

shank.

• Drill is not suitable to use as press!

• If the mains cable is damaged, it may only be replaced

by a mains cable of the same type.

IMMEDIATELY SWITCH OFF THE MACHINE

WHEN:

• Interruption in the mains plug, mains lead or mains

lead damage.

• Defect switch.

• Smoke or stench of scorched isolation.

Voltage | 400 V

Frequency | 50 Hz

Power input | 400 W

No load speed | 220-2500/min

Number of speeds | 12 (L/R)

Chuck capacity/Morse Conisch | 16 mm/MC-2

Weight | 60 kg

Lpa (sound pressure level) | 63.4 dB(A)

Lwa (sound power level) | 76.4 dB(A)

Vibration value | 0.757 m/s

English

Ferm 3

Rating

Let us know what you think about the FERM TDM1010 Drill Press by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.

Are you satisfied with the FERM TDM1010 Drill Press?
Yes No

Be the first to rate this product

0 votes

Join the conversation about this product

Here you can share what you think about the FERM TDM1010 Drill Press. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

More about this manual

We understand that it’s nice to have a paper manual for your FERM TDM1010 Drill Press. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact FERM. They might be able to provide an original manual. Are you looking for the manual of your FERM TDM1010 Drill Press in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

Brand	FERM
Model	TDM1010
Category	Drill Presses
File type	PDF
File size	0.97 MB

All manuals for FERM Drill Presses
More manuals of Drill Presses

Frequently Asked Questions about FERM TDM1010 Drill Press

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.

Can I store power tools in a shed or garage? Verified

In general, you can store power tools in a shed or garage, even if it sometimes freezes there. However, it is better for the lifespan of the power tool to store it in a dry place without major temperature fluctuations. In a shed or garage, differences in temperature can cause condensation to form, which can cause rust. In addition, tools that run on batteries last shorter and do not charge as well at very low temperatures. To be sure how your power tool needs to be stored, always thoroughly read the user manual.

This was helpful (6) Read more