Home > Do-It-Yourself > Tile Cutting Machines > FERM Tile Cutting Machines > FERM TCM4003 Tile Cutting Machine

Manual FERM TCM4003 Tile Cutting Machine

Need a manual for your FERM TCM4003 Tile Cutting Machine? Below you can view and download the PDF manual for free in English. This product currently has 3 frequently asked questions, 0 comments and has 0 votes. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

FERM RADIAL TILE CUTTER

FRTC-550 USERS MANUAL

THE NUMBERS IN THE FOLLOWING TEXT COR-

RESPOND WITH THE PICTURES AT PAGE 2

SAFETY INSTRUCTIONS

The following pictograms are used in these instructions for use:

Denotes risk of personal injury, loss of life or

damage to the tool in case of non-observance of the

instructions in this manual.

Denotes risk of electric shock.

GENERAL SAFETY INSTRUCTIONS

Warning! When using electric tools basic safety

precautions should always be followed to reduce

the risk of fire, electric shock and personal injury.

Read all these instructions before attempting to

operate your product. Save these instructions for

future reference.

Keep work area clear

Cluttered areas and benches invite injuries.

Consider work area environment

Do not expose tools to rain. Do not use tools in damp or

wet locations. Keep work area well lit. Do not use tools

in the presence of flammable liquids or gases.

Guard against electric shock

Avoid body contact with earthed or grounded surfaces.

Keep other people away

Do not let others, especially children, not involved in the

work touch the tool or the extension lead and keep them

away from the work area.

Store idle tools

When not in use, tools should be stored in a dry locked-

up place, out of reach of children.

Do not force the tool

It will do the the job better and saver at rate for which it

was intended.

Use the right tool

Do not force smaal tools to do the job of a heavy tool. Do

not use tools for purposes not intended; for example de

not use circular saws to cut tree limbs or logs.

Dress properly

Do not wear loose clothing or jewellery, they can be

caught in moving parts. Non-skid footwear is recom-

mended when working outdoors. Wear protective hair

covering to contain long hair.

Use protective equipment

Use safety glasses. Use face or dust macsk if cutting ope-

rations create dust.

Connect to dust extraction equipment

If devices are provided for the connection of dust extrac-

tion and colleting equipment, ensure these are connec-

ted and properly used.

Do not abuse cable

Never pull the cable to diconnect it from the socket.

Keep the cord away from heat, oil and sharp edge.

Secure Work

Where possible use clamps or a vice to hold work. It is

safer than using your hand.

Do not over-reach

Keep a proper footing and balance at all times.

Maintain tools with care

Keep cutting tools sharp and clean for better and safer

performance. Follow instructions for lubricating and

changing accessories. Inspect tool cords periodically and

if damaged have them repaired by an authorized service

facility. Inspect extension cords periodically and replace

if damaged. Keep handles dry, clean and free from oil and

grease.

Disconnect tools

When not in use, before servicing and when changing

accessories such as blades, bits and cutters disconnect

tools from the power supply.

Remove adjusting keys and wrenches

Form the habit of checking to see that keys and adjusting

wrenches are removed from the tool before turning it

on.

Avoid unintentional starting

Ensure that the switch is in off position when plugging in.

Use outdoor extension loads

When the tool is used outdoors, only use an extension

cable intended for outdoor use and so marked.

Stay alert

Watch what you are doing, use common sence and do

not operate the tool when you are tired.

Check damaged parts

Before further use of the tool, it should be carefully chec-

ked to determine that it will operate properly and per-

form its intended function. Check the alignment of

moving parts, binding of moving parts, breakage of parts,

mounting and any other conditions that may affect its

operaton.

A guard or other part that is damaged should be properly

repaired or replaced by an authorized service centre

unless otherwise indicated in this instruction manual. Do

not use the tool if the switch does not turn it on and of.

Ferm 310 Ferm

STAND SPARE PARTS LIST

REF. NR. DESCRIPTION Q’TY

1 TOP STIFFENER L / R SIDE 2

2 M5 NYLON NUT 12

3 M5 HEX BOLT 12

4 FRAME CLIP 4

5 FRAME BRACKET 4

6 TOP STIFFENER (FRONT / REAR) 2

7 COACH BOLT M8 16

8Ø 8 WASHER 16

9 M5 MYLON NUT 16

10 LEG NO.1 2

11 LEG 2

12 FEET PAD 4

13 BOTTOM STIFFENER L / R SIDE 2

14 BOTTOM STIFFENER (FRONT / REAR) 2

15 M6 HEX-HEAD BOLT 4

16 Ø 6 WASHER 8

17 M6 NYLON NUT 4

18 M5 NUT 2

19 RING HOOK 1

20 FRAME TUBA 1

Rating

Let us know what you think about the FERM TCM4003 Tile Cutting Machine by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.

Are you satisfied with the FERM TCM4003 Tile Cutting Machine?
Yes No

Be the first to rate this product

0 votes

Join the conversation about this product

Here you can share what you think about the FERM TCM4003 Tile Cutting Machine. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

More about this manual

We understand that it’s nice to have a paper manual for your FERM TCM4003 Tile Cutting Machine. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact FERM. They might be able to provide an original manual. Are you looking for the manual of your FERM TCM4003 Tile Cutting Machine in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

Brand	FERM
Model	TCM4003
Category	Tile Cutting Machines
File type	PDF
File size	0.18 MB

All manuals for FERM Tile Cutting Machines
More manuals of Tile Cutting Machines

Frequently Asked Questions about FERM TCM4003 Tile Cutting Machine

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.

What is the difference between ceramic tiles and porcelain tiles? Verified

Both are made from clay, but porcelain tiles have a higher density. This makes porcelain tiles stronger and more durable, but also harder to cut. You need specialized tools and skills to get the same resulst as with ceramic tiles.

This was helpful (13) Read more

Does it matter which side of the tile I cut? Verified

Yes, no matter which tile you are cutting it is best to cut with the front of the tile facing upwards. This will enure the smoothest finish and minimize the risk of chipping.

This was helpful (10) Read more