Manual FERM HAM1003 Heat Gun

Need a manual for your FERM HAM1003 Heat Gun? Below you can view and download the PDF manual for free in English. This product currently has 3 frequently asked questions, 0 comments and has 0 votes. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

Loading…

02 Ferm
HOT AIR GUN
Read this operators guide carefully,
before using the machine. Ensure that
you know how the machine works, and
how it should be operated. Maintain
the machine in accordance with the
instructions, and make certain that the
machine functions correctly. Keep this
operator’s guide and other enclosed
documentation with the machine.
Contents
1. Machine data
2. Safety instructions
3. Installation
4. Using the appliance
5. Maintenance
1. MACHINE DATA
Technical specifications
2. SAFETY INSTRUCTIONS
Explanation of symbols
In this manual and/or on the machine the follo-
wing symbols are used:
Denotes risk of personal injury, loss of
life or damage to the tool in case of
non-observance of the instructions in
this manual.
Indicates electrical shock hazard.
Additional safety rules
Before using the appliance:
Check the following:
Make sure the voltage of the hot air gun
corresponds with the power voltage.
Are the mains lead and the mains plug in a
good state: strong, without ravels or dama-
ges.
Avoid the use of long extension cables.
Do not use the appliance under moist circum-
stances.
The metal mouthpiece gets hot. Watch out
and do not touch the metal mouthpiece.
Prevent damage of the heating element. Do
not lock or block the mouth piece.
Do not leave the appliance when switched on.
When the appliance is not in use, it can be
put away on the collapsible support, which is
on the air gun. By collapsing this support, the
air gun can easy be put away on it. The hot
air gun now stands on the support with the
mouthpiece up.
Do not use the appliance for drying hair or for
drying living human beings in general.
Do not use the appliance in a bath, above
water or in spaces where easy inflammable
liquids are used.
This appliance operates at a tempera-
ture of 500 degrees without visible
signs of this temperature (no flames),
still there is a chance of fire risk. Watch
out for the hot air stream from the
mouth piece. This air stream can
cause burns.
When operating the appliance
If you are going to use the hot air gun,
vapours and gas can be liberated during a
short time. This can be harmful for your
health. Asthmatics can suffer hindrance of it.
Before connecting the plug to the mains volta-
ge you have to check if the switch is in posi-
tion “0”.
Keep the mains lead always away from the
mouthpiece of the hot air gun.
Keep children and animals away from the
appliance if you are using it.
Immediately switch off the appliance when:
Plug and/or cable are defective or damaged.
The switch is defective.
You smell or see smoke caused by scorched
insulation from the hot air gun.
Voltage 230 V~
Frequency 50 Hz
Power input 1600 W
Position 1
Air flow 340 l/min
Air temperature 300° C
Air speed 8 m/s
Position II
Air flow 590 l/min
Air temperature 500° C
Air speed 14 m/s
GB
DECLARATION OF CONFORMITY
FHG-1600, Hot air gun
Ferm 51
(GB) We declare under our sole responsibility that this
product is in conformity and accordance with the
following standards and regulations:
(D) Der Hersteller erklärt eigenverantwortlich, dass dieses
Produkt den folgenden Standards und Vorschriften
entspricht:
(NL) Wij verklaren onder onze volledige
verantwoordelijkheid dat dit product voldoet aan, en in
overeenstemming is met, de volgende standaarden en
reguleringen:
(F) Nous déclarons sous notre seule responsabilité que ce
produit est conforme aux standards et directives
suivants:
(E) Declaramos bajo nuestra exclusiva responsabilidad
que este producto cumple con las siguientes normas y
estándares de funcionamiento:
(P) Declaramos por nossa total responsabilidade que este
produto está em conformidade e cumpre as normas e
regulamentações que se seguem:
(I) Dichiariamo, sotto la nostra responsabilità, che questo
prodotto è conforme alle normative e ai regolamenti
seguenti:
(S) Vi garanterar på eget ansvar att denna produkt
uppfyller och följer följande standarder och
bestämmelser:
(FIN) Vakuutamme yksinomaan omalla vastuullamme, että
tämä tuote täyttää seuraavat standardit ja säädökset:
(N) Vi erklærer under vårt eget ansvar at dette produktet
er i samsvar med følgende standarder og regler:
(DK) Vi erklærer under eget ansvar, at dette produkt er i
overensstemmelse med følgende standarder og
bestemmelser:
(H) Felelősségünk teljes tudatában kijelentjük, hogy ez a
termék teljes mértékben megfelel az alábbi
szabványoknak és előírásoknak:
(CZ) Na naši vlastní zodpovědnost prohlašujeme, že je tento
výrobek v souladu s následujícími standardy a
normami:
(SK) Vyhlasujeme na našu výhradnú zodpovednosť, že tento
výrobok je v zhode a súlade s nasledujúcimi normami a
predpismi:
(SLO) S polno odgovornostjo izjavljamo, da je ta izdelek v
skladu in da odgovarja naslednjim standardom ter
predpisom:
(PL) Deklarujemy na własną odpowiedzialność, że ten
produkt spełnia wymogi zawarte w następujących
normach i przepisach:
(LT) Prisiimdami visą atsakomybę deklaruojame, kad šis
gaminys atitinka žemiau paminėtus standartus arba
nuostatus:
(LV) Apgalvojam ar visu atbildību, ka šis produkts ir saskaņā
un atbilst sekojošiem standartiem un nolikumiem:
(EST) Deklareerime meie ainuvastutusel, et see toode on
vastavuses ja kooskõlas järgmiste standardite ja
määrustega:
(RO) Declarăm prin aceasta cu răspunderea deplină că
produsul acesta este în conformitate cu următoarele
standarde sau directive:
(HR) Izjavljujemo pod vlastitom odgovornošću da je strojem
ukladan sa slijedećim standardima ili standardiziranim
dokumentima i u skladu sa odredbama:
(SB ) Izjavljujemo pod isklju¸ivom odgovornoš u da je ovaj
proizvod usaglašen i saobrazan sa slede‰im
standardima i propisima:
(RUS) Под свою ответственность заявляем, что данное
изделие соответствует следующим стандартам и
нормам:
(UA) На свою власну відповідальність заявляємо, що
дане обладнання відповідає наступним стандартам і
нормативам:
(GR) ¢ËÏÒÓÔ˘Ì ˘‡ı˘Ó· fiÙÈ ÙÔ ÚÔ˚fiÓ ·˘Ùfi Û˘ÌʈÓ›
Î·È ÙËÚ› ÙÔ˘˜ ·Ú·Î¿Ùˆ ηÓÔÓÈÛÌÔ‡˜ Î·È ÚfiÙ˘·:
EN60335-1, EN60335-2-45, EN55014-1, EN55014-2,
EN61000-3-2, EN61000-3-3
98/37/EC, 73/23/EEC, 89/336/EEC, 2002/95/EC, 2002/96/EC
Zwolle, 01-06-2007
J.A. Bakker - van Ingen J. Lodewijk
CEO Ferm BV Quality Manager Ferm Global
It is our policy to continuously improve our products and we therefore reserve the right to change the product
specification without prior notice.
Ferm BV • Lingenstraat 6 • 8028 PM • Zwolle The Netherlands
Download manual in English (PDF, 0.74 MB)
(Consider the environment and only print this manual if it is really necessary)

Loading…

Rating

Let us know what you think about the FERM HAM1003 Heat Gun by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.
Are you satisfied with the FERM HAM1003 Heat Gun?
Yes No
Be the first to rate this product
0 votes

Join the conversation about this product

Here you can share what you think about the FERM HAM1003 Heat Gun. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

More about this manual

We understand that it’s nice to have a paper manual for your FERM HAM1003 Heat Gun. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact FERM. They might be able to provide an original manual. Are you looking for the manual of your FERM HAM1003 Heat Gun in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

Brand FERM
Model HAM1003
Category Heat Guns
File type PDF
File size 0.74 MB

All manuals for FERM Heat Guns
More manuals of Heat Guns

Frequently Asked Questions about FERM HAM1003 Heat Gun

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.

What are the signs of a heat gun malfunction? Verified

Signs of a heat gun malfunction include a lack of heat, a decrease in heat output, an unusual smell, or sparks coming from the heat gun. If you notice any of these signs, unplug the heat gun and stop using it.

This was helpful (51) Read more

How can I prevent damage to the surface I am using the heat gun on? Verified

To prevent damage to the surface, it is important to keep the heat gun moving and to hold it at the proper distance from the surface. Also, It is advisable to use a lower temperature setting when working with delicate materials and to use a heat-resistant shield.

This was helpful (41) Read more

Can I store power tools in a shed or garage? Verified

In general, you can store power tools in a shed or garage, even if it sometimes freezes there. However, it is better for the lifespan of the power tool to store it in a dry place without major temperature fluctuations. In a shed or garage, differences in temperature can cause condensation to form, which can cause rust. In addition, tools that run on batteries last shorter and do not charge as well at very low temperatures. To be sure how your power tool needs to be stored, always thoroughly read the user manual.

This was helpful (8) Read more
Manual FERM HAM1003 Heat Gun

Related products

Related categories