Home > Do-It-Yourself > Glue Guns > FERM Glue Guns > FERM GGM1001 Glue Gun

Manual FERM GGM1001 Glue Gun

Need a manual for your FERM GGM1001 Glue Gun? Below you can view and download the PDF manual for free in English. This product currently has 2 frequently asked questions, 0 comments and has 0 votes. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

Always check that the power supply

corresponds to the voltage on the rating

plate.

Class ll machine. Your machine is double

insulated; therefore no earthwire is

required.

Replacing cables or plugs

Immediately throw away old cables or plugs when

they have been replaced by new ones. It is

dangerous to insert the plug of a loose cable in

the wall outlet.

Using extension cables

Only use an approved extension cable suitable

for the power input of the machine. The minimum

conductor size is 1.5 mm

. When using a cable

reel always unwind the reel completely.

3. OPERATION

Always observe the safety instructions

and applicable regulations.

This glue gun (kit) has been especially designed

for glueing products such as wood, plastic, foam,

rubber, fabric, cardboard, tiles, ceramics, etc.

Quickly setting, the glue is perfect for repairing

carpets, bookbinding, xing soles, etc. The glue is

waterproof and resistant to the action of many

liquids. The glue gun is quick, environmentally-

friendly, energy-saving and together with the glue

facilitates and quickens any job.

Due operating the glow gun

• The normal setting time of the hot glue is 30

seconds. After 30 seconds the glue starts to

set. Having applied the glue on the relevant

surfaces, wait 15 - 20 seconds before joining

them.

After about 1 minute the joint has reached

90% of its adhesive strength.

• The setting time can be extended to 50 to 60

seconds by applying the glue in thick drops or

shortened by applying the glue in short, ne

lines.

• Joining large surfaces is difcult, as the glue

tends to set before the entire surface has been

covered with glue.

• Preheating the surfaces to be joined

guarantees a strong joint. Sun rays have the

same impact.

• The glue melts from a temperature of approx.

140°C and must never be used on material

that is sensitive to heat.

• The glue gun can be used to replace nails,

paper tape, liquid glue, but not for heavy-duty

jobs.

• The electric glue gun features accurate

temperature control. It is tted with a special

design feed system that ensures no glue is left

behind inside the mechanism.

• The glue gun requires Ø 12mm glue

cartridges.

• The glue gun comes standard with a bracket

that enables you to put the gun safely on the

table when it is not used.

Operation

• Plug in the tool.

• Insert a glue cartridge into the gun, two when

using it for the rst time.

• Wait 5 minutes for the glue to heat.

• Squeeze the trigger to release the glue.

• Replace the glue cartridge as soon as you

notice little if any glue is released from the

gun.

• Disconnect the tool if you do not intend to use

it for some time.

Replacing the nozzle

• Loosen the orange nozzle. If it does not come

easy, use the spanner provided.

• Fit the nozzle on the glue gun. Tightly secure

with the spanner.

Before removing the nozzle, allow the

glue gun to cool down completely to

avoid injuries. Always disconnect the

tool.

4. SERVICE AND

MAINTENANCE

Make sure that the machine is not live

when carrying out maintenance work on

the motor.

This machine has been designed to operate over

a long period of time with a minimum of

maintenance. Continuous satisfactory operation

depends upon proper machine care and regular

cleaning.

Rating

Let us know what you think about the FERM GGM1001 Glue Gun by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.

Are you satisfied with the FERM GGM1001 Glue Gun?
Yes No

Be the first to rate this product

0 votes

Join the conversation about this product

Here you can share what you think about the FERM GGM1001 Glue Gun. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

More about this manual

We understand that it’s nice to have a paper manual for your FERM GGM1001 Glue Gun. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact FERM. They might be able to provide an original manual. Are you looking for the manual of your FERM GGM1001 Glue Gun in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

Brand	FERM
Model	GGM1001
Category	Glue Guns
File type	PDF
File size	13.36 MB

All manuals for FERM Glue Guns
More manuals of Glue Guns

Frequently Asked Questions about FERM GGM1001 Glue Gun

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.

Which materials can I glue with a glue gun? Verified

Glue guns are best suited to glue wood, wood materials, stone materials and fibre materials. Examples of fibre materials are cloth, leather, cardboard and paper. These machines are less suited for glueing glass and plastics.

This was helpful (51) Read more

Can I store power tools in a shed or garage? Verified

In general, you can store power tools in a shed or garage, even if it sometimes freezes there. However, it is better for the lifespan of the power tool to store it in a dry place without major temperature fluctuations. In a shed or garage, differences in temperature can cause condensation to form, which can cause rust. In addition, tools that run on batteries last shorter and do not charge as well at very low temperatures. To be sure how your power tool needs to be stored, always thoroughly read the user manual.

This was helpful (2) Read more