Home > Do-It-Yourself > Delta Sanders > FERM Delta Sanders > FERM DSM1002 Delta Sander

Manual FERM DSM1002 Delta Sander

Need a manual for your FERM DSM1002 Delta Sander? Below you can view and download the PDF manual for free in English. This product currently has 1 frequently asked question, 0 comments and has 0 votes. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

Ferm 35

AVAILABLE SPARE PARTS FOR FTS-260

REF.NR. DESCRIPTION FERM NR.

2 SPINDLE GEAR 408200

12 - 17 SANDING PAD (COMPLETE) 408201

18 FIELD COIL 408202

19 CARBON BRUSH (SET) 408203

23 ARMATURE 408204

25 ARMATURE GEAR 408205

38 SWITCH 408206

EXPLODED VIEW

Product: Ferm triangular sander

Type FTS-260K, Art.nr. 326240

Ferm, Zwolle, The Netherlands.

Sound pressure level L

71,4 dB(A)

Vibration (

) 5,8 m/s

Serial nr.

CAREFULLY READ THE INSTRUCTIONS BE-

FORE YOU USE THE TRIANGULAR SANDER!

1. SPECIAL SAFETY INSTRUCTIONS

BEFORE USING THE MACHINE:

1. Check the following points.

- do the voltage of the appliance correspond

with the mains voltage, appliances for a mains

voltage of 230 V can also be connected at a

mains voltage of 220 V;

-are the mains lead and the mains plug in a good

condition: solid, without any loose ends or

damage;

2. Avoid using long extension cables.

3. Check the condition of the sandpaper. Is it not worn

or are there any cracks. Replace bad sandpaper.

WHILE USING THE MACHINE

1. If you are working with the sander, wear always

ear protection and dust mask.

2. The machine is not suitable for wet sanding.

3. Check that the switch is not in the “ON”-position

before connecting the machine to the mains voltage.

4. Always keep away the mains lead from moving

parts of the machine.

5. Use safety glasses, certain when sanding above

your head.

6. Do not bring pressure to your machine, this will

only delay the sanding.

SWITCH OFF THE MACHINE IN CASE OF:

1. The machine is overheated.

2. Defective mains plug, mains lead or damage to the

mains lead.

3. Defective switch.

4. Smoke or bad smell caused by scorched insulation.

2. USE

1. INSTALLING SANDPAPER

As the sole of your sander is provided with velcro, you can

only use sandpaper which can be fixed in the same way.

1. Pull the mains plug out of the power-point

2. Have the little gaps in the sandpaper coincide with

the little gaps in the sole and push on the paper for

fixing it on the sole.

2. APPLICATIONS

The sander can only be used for the subjoined applications.

1. Sanding wooden surfaces

2. Sanding metal surfaces

3. Polishing.

3. DUST EXTRACTION

The sanding machine is provided with a connection for

dust extraction to keep the working surface clean. This

is the opening at the back of the sander. You can con-

nect a vacuum cleaner onto this opening.

Insert the adapter into the dust extraction opening of

the triangular sanding machine. When doing so, make

sure that the adapter projections fall into the recesses

of the dust extraction opening. Turn the adapter 45

degrees clockwise. You may now insert the vacuum

cleaner tube into the adapter. The adapter is equipped

with an adapter ring, located in the back of the adapter.

For deviant tube sizes, remove the adapter ring from

the adapter.

3. OPERATION

Press the on/off switch to turn on the machine. To

regulate the speed, use the adjusting wheel.

An excessive load when the sanding machine is run-

ning at a low speed may cause the motor to burn out.

4. SANDING

The foot of the sanding machine makes small circular

movements. The result is an even, smoothly sanded

ORDER NUMBER/YEAR OF CONSTRUCTION

V~ W rpm mm

326240 FTS-260K 230 260 6000-9000 90 x 90 x 90

2 Ferm

ART.NR

TYPE

Rating

Let us know what you think about the FERM DSM1002 Delta Sander by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.

Are you satisfied with the FERM DSM1002 Delta Sander?
Yes No

Be the first to rate this product

0 votes

Join the conversation about this product

Here you can share what you think about the FERM DSM1002 Delta Sander. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

More about this manual

We understand that it’s nice to have a paper manual for your FERM DSM1002 Delta Sander. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact FERM. They might be able to provide an original manual. Are you looking for the manual of your FERM DSM1002 Delta Sander in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

Brand	FERM
Model	DSM1002
Category	Delta Sanders
File type	PDF
File size	0.93 MB

All manuals for FERM Delta Sanders
More manuals of Delta Sanders

Frequently Asked Questions about FERM DSM1002 Delta Sander

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.

Can I store power tools in a shed or garage? Verified

In general, you can store power tools in a shed or garage, even if it sometimes freezes there. However, it is better for the lifespan of the power tool to store it in a dry place without major temperature fluctuations. In a shed or garage, differences in temperature can cause condensation to form, which can cause rust. In addition, tools that run on batteries last shorter and do not charge as well at very low temperatures. To be sure how your power tool needs to be stored, always thoroughly read the user manual.

This was helpful (13) Read more