Home > Do-It-Yourself > Circular Saws > FERM Circular Saws > FERM CSM4001 Circular Saw

Manual FERM CSM4001 Circular Saw

Need a manual for your FERM CSM4001 Circular Saw? Below you can view and download the PDF manual for free in English. This product currently has 3 frequently asked questions, 0 comments and has 0 votes. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

10 Ferm

OPERATIONAL SAFETY

Warning! Never use the machine for sawing

asbestos. If asbestos is discovered or suspected,

contact your local council for advice.

Concentrate

Routine and repetition can lead to mistakes. Remember

that a slight lack of concentration can result in serious

injuries in a split second.

Keep work area clean

Cluttered areas and benches invite injuries.

Consider the work environment

Do not expose power tools to rain or use them in damp

or wet locations. Keep work area well lit. Do not use

power tools in the presence of flammable liquids, vap-

ours or gases.

Guard against electric shock

This unit contains dangerous voltages. Use a RCD (resi-

dual current device) to provide protection against elec-

trical shock. Prevent body contact with grounded sur-

faces (e.g. pipes, radiator, ranges or refrigerators).

Keep children and pets away

Do not let children or pets come into contact with the

tool, extension cable or work area.

Do not force the tool

It will work better and safer at the rate for which it was

intended.

Use the right tool

Do not force small tools or attachments to do the job of a

heavy-duty tool. Do not use tools for purposes for which

they were not intended; for example do not use a circular

saw for cutting trees or logs.

Do not abuse cable

Never carry the tool by the cable or pull it to disconnect

it from the power socket. Keep the cable away from heat,

oil and sharp edges. Do not touch the metal plug pins

when connecting or removing the plug.

Secure Work

Use clamps or a vice to hold work. It is safer than using

your hand and it frees both hands to operate the tool. Be

aware that this saw is a powerful machine; you must use

two hands to control it.

Do not over-reach

Keep a proper footing and balance at all times.

Disconnect tools from power supply

When not in use, before servicing and when changing

accessories such as blades, bits and cutters. Always

switch off and unplug the saw from the power

supply before making adjustments or changing

blades.

Remove adjusting keys and wrenches

Ensure that they are removed from the tool before swit-

ching on.

Avoid unintentional starting

Do not carry plugged in tools with your finger on the

switch. Check that the switch is off before plugging in to

socket.

Outdoor use extension cables

When the tool is used outdoors use only an extension

cable intended for outdoor use and marked accordingly.

Use a RCD (residual current device) to provide protec-

tion against electrical shock. Do not use in rain or damp

conditions.

Connect a dust extraction device

Whenever there are facilities for fitting a dust or fume

extraction system, make sure it is connected and used.

Use recommended accessories

The use of any other accessory or attachment other than

recommended in the instructions or catalogue may pre-

sent a risk of personal injury. Use extension cables suita-

ble for the power input of the saw (minimum cable size

1.5mm2). When using a cable reel unwind the cable fully.

Ferm 3

SPARE PARTS LIST FKS-180

REF NR DESCRIPTION FERM NR

8/9/10 CARBON BRUSH (SET) 700000

11 CARBON BRUSH CAP 700001

16 STATOR 700002

22 AUXILIARY HANDLE 700003

24 SWITCH 700004

27 ROTOR 700005

37 GEAR 700006

38 FLANGE (OUTSIDE) 700007

42 SPLITTER 700008

43 SPRING 700015

44 SAW BLADE PROTECTION COVER 700009

45 HARD METAL SAW BLADE Ø 180 MM 310310

46 FLANGE (INSIDE) 700010

47 LEFT BOLT FOR SAW BLADE 700011

50 SOCKET SPANNER 700012

55 PARALLEL GUIDE 700013

61 GUIDE PLATE 700014

Rating

Let us know what you think about the FERM CSM4001 Circular Saw by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.

Are you satisfied with the FERM CSM4001 Circular Saw?
Yes No

Be the first to rate this product

0 votes

Join the conversation about this product

Here you can share what you think about the FERM CSM4001 Circular Saw. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

More about this manual

We understand that it’s nice to have a paper manual for your FERM CSM4001 Circular Saw. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact FERM. They might be able to provide an original manual. Are you looking for the manual of your FERM CSM4001 Circular Saw in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

Brand	FERM
Model	CSM4001
Category	Circular Saws
File type	PDF
File size	0.39 MB

All manuals for FERM Circular Saws
More manuals of Circular Saws

Frequently Asked Questions about FERM CSM4001 Circular Saw

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.

How many millimeter does the saw need to protrude under the material I'm sawing? Verified

It's best to keep this at 3mm or more. When it is less, there is a chance the material will crumble or lead to an ugly result.

This was helpful (95) Read more

Do I need to wear hearing protection when using a circular saw? Verified

Yes you should. Although the amount of noise produced by a circular saw can vary between brands and models, long term exposure to loud noise can cause permanent hearing damage. That is why it is a good idea to wear hearing protection.

This was helpful (43) Read more

Can I store power tools in a shed or garage? Verified

In general, you can store power tools in a shed or garage, even if it sometimes freezes there. However, it is better for the lifespan of the power tool to store it in a dry place without major temperature fluctuations. In a shed or garage, differences in temperature can cause condensation to form, which can cause rust. In addition, tools that run on batteries last shorter and do not charge as well at very low temperatures. To be sure how your power tool needs to be stored, always thoroughly read the user manual.

This was helpful (13) Read more