Home > Do-It-Yourself > Compressors > FERM Compressors > FERM CRM1008 FC 730 Compressor

Manual FERM CRM1008 FC 730 Compressor

Name: FERM CRM1008 FC 730 Compressor
Brand: FERM
SKU: CRM1008 FC 730
Rating: 100 (1 reviews)

Need a manual for your FERM CRM1008 FC 730 Compressor? Below you can view and download the PDF manual for free in English. This product currently has 0 frequently asked questions, 0 comments and has 1 vote with an average product rating of 100/100. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

INSTALLATION

Fig. A

1. On/off switch

2. Reducing valve

3. Quick coupling

4. Manometer

5. Oil gauge

6. Draining valve

7. Air filter

8. Quick coupling

STARTUP AND USE

Fig. B & C

• Assemble the wheels and components.

• Check oil level on the viewer (5) and eventually fill-in

through the breather pipe. Level under the lower

edge, is dangerous for the integrity of the pump and

excess of oil will cause passing of oil in the compres-

sed air.

Start and stop actions have to be made only

through the on-off switch (1), to stop the compres-

sor at the plug can cause grave damage to the electric motor in

the next starting.

The compressor must be installated in a frost free well ventila-

ted room. Position the unit at least 50 cm from any wall or

obstruction to enable correct cooling. To ensure correct lubri-

cation position the unit on a level surface.

OPERATION

OPERATION THE COMPRESSOR

Fig. D

• The mains switch (1) needs to be in “OFF” or “0”

position before the mains plug is connected to the

mains voltage.

• Bij switching the switch (1) to “ON” or “1” the com-

pressor will operate.

• Always keep the mains lead away from moving parts

of any linked up air-pressure equipment.

• With the use of the reducing valve (2) it is possible to

adjust the air pressure by hand.

PRESSURE ADJUSTMENT

Fig. E

Air pressure switch (1) has already been set at the

test stage, do not change pressure valve (increase

of pressure is dangeraus for the motor.)

Keeping the tap (3) open the regulation knob pulling it up

first and then rotate the regulation knob (2) clockwise to

increase the pressure and anti-clockwise to reduce it,

never exceed the max. set value having verified the

requested value on the manometer (4). At the end of

operation return to 0 bar.

On the tank there is if required a direct outlet (8) for

max. pressure. The pressure of air supplied depends on

the value of the set pressure and the excessive air con-

sumption is shown by the low gauges values

4 Ferm Ferm 37

Download manual in English (PDF, 1.21 MB)

(Consider the environment and only print this manual if it is really necessary)

Rating

Let us know what you think about the FERM CRM1008 FC 730 Compressor by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.

Are you satisfied with the FERM CRM1008 FC 730 Compressor?
Yes No

100%

1 vote

Join the conversation about this product

Here you can share what you think about the FERM CRM1008 FC 730 Compressor. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

More about this manual

We understand that it’s nice to have a paper manual for your FERM CRM1008 FC 730 Compressor. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact FERM. They might be able to provide an original manual. Are you looking for the manual of your FERM CRM1008 FC 730 Compressor in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.