Home > Do-It-Yourself > Compressors > FERM Compressors > FERM CRM1007 FCN-600K Compressor

Manual FERM CRM1007 FCN-600K Compressor

Need a manual for your FERM CRM1007 FCN-600K Compressor? Below you can view and download the PDF manual for free in English. This product currently has 0 frequently asked questions, 0 comments and has 0 votes. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

ONDERHOUD

Zorg dat de machine niet onder spanning staat

wanneer onderhoudswerkzaamheden aan het

mechaniek worden uitgevoerd.

De machines van Ferm zijn ontworpen om gedurende

lange tijd probleemloos te functioneren met een minimum

aan onderhoud. Door de machine regelmatig te reinigen

en op de juiste wijze te behandelen, draagt u bij aan een

hoge levensduur van uw machine.

Reinigen

Reinig de machine-behuizing regelmatig met een zachte

doek, bij voorkeur iedere keer na gebruik. Zorg dat de ven-

tilatiesleuven vrij van stof en vuil zijn.

Gebruik bij hardnekkig vuil een zachte doek bevochtigd

met zeepwater. Gebruik geen oplosmiddelen als ben-

zine, alcohol, ammonia, etc. Dergelijke stoffen beschadi-

gen de kunststof onderdelen.

Smeren

De kompressor heeft geen extra smering nodig. De tacker

daarentegen wel, zoals in de gebruiksaanwijzing is ver-

meld.

Storingen

Indien zich een storing voordoet als gevolg van bijvoor-

beeld slijtage van een onderdeel, neem dan contact op

met uw plaatselijke Ferm-dealer.

MILIEU

Om transportbeschadiging te voorkomen, wordt de

machine in een stevige verpakking geleverd. De verpak-

king is zo veel mogelijk gemaakt van recyclebaar materi-

aal. Maak daarom gebruik van de mogelijkheid om de ver-

pakking te recyclen.

Breng oude machines wanneer u ze vervangt naar uw

plaatselijke Ferm-dealer. Daar zal de machine op milieu-

vriendelijke wijze worden verwerkt.

GARANTIE

Lees voor de garantievoorwaarden de apart bijgevoegde

garantiekaart.

ClEl

■

CONFORMITEITSVERKLARING

(

)

Wij verklaren dat dit product

voldoet aan de volgende

normen of normatieve documenten

EN50144-1, EN50144-2-4. EN55014-1, EN55014-2,

EN61000-3-2, EN61000-3-3

overeenkomstig de bepalingen in de richtlijnen

98/37/EEG

73/23/EEG

89/336/EEG

vanaf 01-05-2001

GENEMUIDEN NL

G.M. Ensing

Quality department

Ferm 11

COMPRESSOR/NAILING KIT

The following symbols are used in these instructions for

use:

Denotes risk of personal injury, loss of life or

damage to the tool in case of non-observance of

the instructions in this manual.

Denotes risk of electric shock.

Carefully read this manual before using the machine.

Make sure that you know how the machine functions and

how to operate it. Maintain the machine in accordance

with the instructions to make sure it functions properly.

Keep this manual and the enclosed documentation with

the machine.

1. SAFETY INSTRUCTIONS

When using electric machines always observe the

safety regulations applicable in your country to

reduce the risk of fire, electric shock and personal

injury. Read the following safety instructions and

also the enclosed safety instructions.

1. Personal Safety - Avoid wearing loose clothing, jewel-

lery or anything that could get caught in moving parts.

Long hair should be tied back.

Use of safety goggles is recommended (normal glas-

ses are not sufficient for eye protection).

Face or dust masks should be used if dust is produced

or working overhead and ear protection is advised

during periods of extended operation.

2. Clean Work Area - Cluttered areas and benches invite

injuries. Keep floors clearand dry.

3. Dangerous Environment - Do not use your Nailing Kit

in damp or wet locations.

4. Always Use The Correct Power Tool - Do not attempt

to use the Nailing Kit for a purpose for which it was not

designed. The Nailing Kit will give much better service

if you do not use excessive force.

5. Guard Against Electric Shocks - Avoid body contact

with earthing surfaces (e.g. radiators, pipes, dishwas-

hers, refrigerators). Do not touch metal parts of the

Nailing Kit when nailing into walls.

6. General Safety - Secure work with a clamp,

do not over-reach and do not use when tired.

7. Check Before Use - Make sure switch is in the OFF

position before plugging in the mains lead. Always

check the Nailing Kit is not damaged before turning on.

Any damaged parts should be correctly repaired or

replaced.

8. Disconnect the Compressor when not in use, or when

changing accessories or bits. Always unplug when

leaving the Compressor unattended.

9. Protect The Cable - Never carry the Compressor by its

cable, or pull it to remove the plug from the socket. Pro-

tect cable from sharp objects, heat and oil. If dama-

ged, have it replaced.

10. Maintain The Nailing Kit - Keep clean and in good wor-

king order for best and safest performance. Always

follow instructions for changing accessories.

11. Beware Children & Pets - Children and pets should be

kept at a safe distance from the work area.

All tools should be kept out of reach of children and

stored in a safe place.

12. This equipment must not be used in an explosive envi-

ronment.

13. Do not attempt to use the air nailer whilst on a ladder.

SPECIFIC SAFETY INSTRUCTIONS

Strictly observe the following safety measures:

1) Disconnect the compressor from the mains supply

before making any adjustments to the machine.

2) Do not carry out any electrical or mechanical modifica-

tions to the product. If problems arise, immediately call

the supplier.

3) Do not spray the airline or direct any spraygun or

attachment at flames or heat sources.

4) Avoid prolonged exposure of the machine to the direct

rays of the sun, in order not to overheat plastic parts.

2 Ferm

Rating

Let us know what you think about the FERM CRM1007 FCN-600K Compressor by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.

Are you satisfied with the FERM CRM1007 FCN-600K Compressor?
Yes No

Be the first to rate this product

0 votes

Join the conversation about this product

Here you can share what you think about the FERM CRM1007 FCN-600K Compressor. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

More about this manual

We understand that it’s nice to have a paper manual for your FERM CRM1007 FCN-600K Compressor. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact FERM. They might be able to provide an original manual. Are you looking for the manual of your FERM CRM1007 FCN-600K Compressor in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.