Home > Do-It-Yourself > Drill-Drivers > FERM Drill-Drivers > FERM CDM1009 Drill-Driver

Manual FERM CDM1009 Drill-Driver

Need a manual for your FERM CDM1009 Drill-Driver? Below you can view and download the PDF manual for free in English. This product currently has 3 frequently asked questions, 0 comments and has 0 votes. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

TECHNICAL SPECIFICATIONS

Voltage (FTC-1440K2) 14.4 V

—

- - -

Voltage battery charger 230 V~

Frequency battery charger 50 Hz

Capacity battery 1.2 Ah (NiCd)

Charging time 3 - 5 h

Number of drilling speeds 2

Speed, no load 0-400/0-1150/min

Chuck capacity 0.8 - 10 mm

Drilling capacity wood 20 mm

Drilling capacity steel 10 mm

Drilling capacity aluminium 13 mm

Weight 1.66 kg

Lpa (Sound pressure) 66.28 dB(A)

Vibration value < 2,5 m/s

ELECTRICAL SAFETY

Always check that the voltage on the batterypack

corresponds to the voltage on the rating plate. Also

check that your mains voltage corresponds to the input voltage

of the battery charger.

The batterycharger is double insulated in accordance

with EN-60335; therefore no earth wire is required.

Replacing cables or plugs

Immediately throw away old cables or plugs when they

have been replaced by new ones. It is dangerous to insert

the plug of a loose cable in the wall outlet.

Using extension cables

Only use an approved extension cable suitable for the po-

wer input of the machine. The minimum conductor size is

1.5 mm

. When using a cable reel always unwind the reel

completely.

PACKAGE CONTENTS

1Cordless drill

2 Batteries

1 Battery charger

1 Blow case

2Double-sided bits

1 Instruction manual

1 Guarantee card

1 Safety recommendations

Check the machine, loose parts and accessories for

transport damage.

PRODUCT INFORMATION (Fig. A)

1On/off switch

2Direction switch

3 Speed selector switch

4 Torque setting ring

5 Chuck

6 Battery

MOUNTING ACCESSOIRES

Prior to mounting an accessory always remove the

battery.

INSERTING AND REMOVING THE DRILL

BITS (Fig. B)

In addition to bits the machine can also hold screw bits

with a hexagonal shaft.

• Loosen the chuck by holding one section (5b) and tur-

ning the other (5a)

•Position the drill bit shaft in the take up of the chuck.

• Fasten the chuck until the drill bit is tight.

•Open the chuck again when you want to exchange the

drill bit.

INSERTING AND REMOVING OF THE

BATTERY

•Make sure that the direction switch (2) is in middle

position to prevent the machine from switching on

unexpectedly.

• Place the accumulator in the bottom of the machine,

as shown in the diagram, until it engages. After the ac-

cumulator is placed, it can be fully rotated in four

steps of 90º. There is no need to remove the accumu-

lator from the machine to do this.

• Before removing the accumulator, depress the relea-

se button (6) and then take the accumulator out from

the bottom of the machine

4 Ferm



     

  .

       

      .

   .

     

  .  

    

  .

   (. )

     .

•     (3)   '1'

    .

•       '2' 

   .

    (.)

       

,       

    .

•       

(4)    .

•      

     . 

      

«»  .

  .

•     (2)  

'R'     .

•       'L'

    .



•      

 (4)   .

     (2)

    'R'  

.

  

(.)

•    /

 (1).    

     

  .

•    /

 (1)    

 .

•     (2)  

      

 .

      

  .     

  .   

    .

  (.)

       

    FTC-1440K2.

•       

    .

•    .  

  .

•    ,   

      

.

!     " 

   " 10 °C  40 °C.

     

  .    

 ,      5 - 7 

   .

      

    4 – 5 .

Ferm 57

Rating

Let us know what you think about the FERM CDM1009 Drill-Driver by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.

Are you satisfied with the FERM CDM1009 Drill-Driver?
Yes No

Be the first to rate this product

0 votes

Join the conversation about this product

Here you can share what you think about the FERM CDM1009 Drill-Driver. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

More about this manual

We understand that it’s nice to have a paper manual for your FERM CDM1009 Drill-Driver. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact FERM. They might be able to provide an original manual. Are you looking for the manual of your FERM CDM1009 Drill-Driver in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

Brand	FERM
Model	CDM1009
Category	Drill-Drivers
File type	PDF
File size	0 MB

All manuals for FERM Drill-Drivers
More manuals of Drill-Drivers

Frequently Asked Questions about FERM CDM1009 Drill-Driver

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.

I keep stripping the screw head when using the drill-driver. Why is that? Verified

Most drill-drivers can be set to screw harder or softer. If the head keeps being stripped, the drill-driver should probably be put into a different setting. When it is a wireless device, always be sure the battery is charged for an optimal result.

This was helpful (80) Read more

Do I need to wear hearing protection when using a drill? Verified

Yes you should. Although the amount of noise produced by a drill can vary between brands and models, long term exposure to loud noise can cause permanent hearing damage. That is why it is a good idea to wear hearing protection.

This was helpful (27) Read more

Can I store power tools in a shed or garage? Verified

In general, you can store power tools in a shed or garage, even if it sometimes freezes there. However, it is better for the lifespan of the power tool to store it in a dry place without major temperature fluctuations. In a shed or garage, differences in temperature can cause condensation to form, which can cause rust. In addition, tools that run on batteries last shorter and do not charge as well at very low temperatures. To be sure how your power tool needs to be stored, always thoroughly read the user manual.

This was helpful (12) Read more