Home > Do-It-Yourself > Bench Grinders > FERM Bench Grinders > FERM BGM1019 Bench Grinder

Manual FERM BGM1019 Bench Grinder

Need a manual for your FERM BGM1019 Bench Grinder? Below you can view and download the PDF manual for free in English. This product currently has 1 frequently asked question, 0 comments and has 0 votes. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

2. SAFETY INSTRUCTIONS

Explanation of symbols

Denotes risk of personal injury, loss of life

or damage to the tool in case of non-

observance of the instructions in this

manual.

Indicates the presence of an electrical

voltage.

Keep bystanders away.

Wear eye and ear protection.

Special safety instructions

When using the machine for the first time:

• Check te following:

• Does the voltage rating of the bench grinder

correspond to the power supply?

• Is an earthed mains power socket

available?

• Are the power cord and plug in good

condition (solid, without fraying or other

damage)?

• Avoid the use of long extension cords. The

extension cords you use must always be

earthed.

• A grinding wheel is a brittle toolpiece. The

stone is not resistant to knocks.

• Always grind on the front edge of the grinding

wheel, and never on the side of the grinding

wheel. Never fit a cracked grinding wheel.

Replace it immediately, as the high rotational

speed could cause the stone to fly apart,

causing a serious accident.

• Always wear safety glasses when grinding.

• Never grind without the cover fitted over the

grinding wheel.

• Always fit the grinding wheel cover and tool

rest tightly, and with the correct clearance.

• Never allow more than 1-1.5 mm clearance

between tool rest and grinding wheel.

• Only use the grinding wheel for the work it was

designed for (for example sharpening tools),

and NOT for heavy construction work.

• The following information must be available,

before you fit any new grinding wheel:

• Details about the manufacturer.

• Binding material.

• Dimensions.

• Permissible rotational speed.

• Never ream out the hole in a grinding wheel to

a larger diameter.

• The maximum rotational speed of the grinding

wheel should never be allowed to exceed the

maximum speed given for the wheel.

• Never use any grinding wheel that is damaged

or deformed.

• In order to be able to grind safely, the machine

must be firmly bolted to a workbench.

• The tool rest should be replaced whenever the

width of the tool rest measures less than 20

mm.

• The recommended depth of the recess in the

flange (T) is 2 mm and the diameter of the

spindle hole is 13 mm (see Fig. B).

Whenever using the machine

• Check that the switch is NOT in the ‘ON/1’

position before connecting the machine to the

power supply.

• Always keep the power cord out of the way of

the tool’s moving parts.

Immediately switch off the machine when:

• The plug or power cord is defective or

damaged.

• The switch is defective.

• You smell smoke or burning insulation

Electrical safety

When using electric machines always observe the

safety regulations applicable in your country to

reduce the risk of fire, electric shock and personal

injury. Read the following safety instructions and

also the enclosed safety instructions.

Always check that the power supply

corresponds to the voltage on the rating

plate.

Replacing cables or plugs

Immediately throw away old cables or plugs

when they have been replaced by new ones. It is

dangerous to insert the plug of a loose cable in

the wall outlet.

Rating

Let us know what you think about the FERM BGM1019 Bench Grinder by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.

Are you satisfied with the FERM BGM1019 Bench Grinder?
Yes No

Be the first to rate this product

0 votes

Join the conversation about this product

Here you can share what you think about the FERM BGM1019 Bench Grinder. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

More about this manual

We understand that it’s nice to have a paper manual for your FERM BGM1019 Bench Grinder. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact FERM. They might be able to provide an original manual. Are you looking for the manual of your FERM BGM1019 Bench Grinder in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

Brand	FERM
Model	BGM1019
Category	Bench Grinders
File type	PDF
File size	4.49 MB

All manuals for FERM Bench Grinders
More manuals of Bench Grinders

Frequently Asked Questions about FERM BGM1019 Bench Grinder

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.

Can I store power tools in a shed or garage? Verified

In general, you can store power tools in a shed or garage, even if it sometimes freezes there. However, it is better for the lifespan of the power tool to store it in a dry place without major temperature fluctuations. In a shed or garage, differences in temperature can cause condensation to form, which can cause rust. In addition, tools that run on batteries last shorter and do not charge as well at very low temperatures. To be sure how your power tool needs to be stored, always thoroughly read the user manual.

This was helpful (2) Read more