Home > Do-It-Yourself > Bench Grinders > FERM Bench Grinders > FERM BGM1010 Bench Grinder

Manual FERM BGM1010 Bench Grinder

Need a manual for your FERM BGM1010 Bench Grinder? Below you can view and download the PDF manual for free in English. This product currently has 1 frequently asked question, 0 comments and has 0 votes. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

Ferm 31

Product: Ferm Belt sander/grinder

Type FBSM-150/50, art.nr. 350350

Ferm, Genemuiden, The Netherlands

Sound pressure level 76 dB(A)

In order to prevent overheating and possi-

ble damages to the engine, use the machine

intermittently, for periods of 30 minutes.

CAREFULLY READ THE INSTRUCTIONS

BEFORE YOU USE THE BELT SANDER/-

GRINDER!

1. GENERAL SAFETY RULES

Keep the work area clean.

- A cluttered work area may cause accidents.

- Make sure the work area is well lit.

Work environment.

Never leave tools in the rain. Do not use tools

in damp or wet places. Never use tools near in-

flammable liquids or gasses.

Prevent electrical shock.

Keep the power cord away from heat, oil and

sharp edges. Avoid skin contact with exposed

parts of the power cord or plug. Damaged parts

must be replaced immediately.

Keep children away.

Never allow children or spectators to touch the

tools, keep them at a safe distance from the

work area.

Store tools in a safe place.

Tools that are not used must be stored in a dry

and locked placed, out of the reach of children.

Do not force the tool.

The machine will do the job better and safer at

the rate for which it was intended. Damage cau-

sed by forcing the tool is not covered by the

warranty.

Use the right type of tool.

Do not use low-powered tools for heavy-duty

operations. Never use the machine other than

for its intended purpose.

Wear suitable clothing.

- Do not wear loose clothing or jewellery that

might get caught in moving parts;

- Never wear rings with protruding parts;

- Cover long hair;

Wear safety glasses, mouth and ear protection.

Wear personal protection while working.

Cable.

Never carry the tool by its cable and do not tug

at the cable to pull the plug from the socket.

Keep the cable away from heat, oil and sharp

edges.

Always clamp the work.

Always clamp the work against the bench.

Never

work on objects that are too small to hold.

Posture.

- Do not over each. Be sure of your footing and

balance at all times;

- Do not over reach on ladders or scaffold.

Maintain the tool with care.

- The tool works best and safest if it is kept clean.

- Observe the instructions for maintenance and

changing accessories. Keep the tool dry and free

from oil and grease.

Disconnect the machine.

Disconnect the machine when you do not use it,

before cleaning and when changing accessories

and tools.

Remove wrenches from the machine.

Before starting the machine, make sure to

remove wrenches and other tools.

Avoid unintentional starting.

Never carry the plugged-in machine with your

finger on the switch. Make sure the switch is off

when the machine is plugged in.

Extension cable for outdoor use.

When working outdoors use only extension cables

suitable for this purpose and marked as such.

When using machines with earth connection, use

an extension cable with earth connection.

Stay alert.

Watch what you are doing, use your common

sense, do not operate the tool when you cannot

concentrate on the job.

Check the machine for damage.

- Before starting the machine, check that all safety

devices operate properly;

- Make sure all moving parts are in good working

order. Check the machine for any broken or

English

230V~ 240 W N

= 686 x 50 Ø 150 x Ø 12,7 mm

50Hz 2950/min mm 20 mm

2 Ferm

AVAILABLE SPARE PARTS FOR FBSM-150/50

REF.NR. DESCRIPTION FERM NR.

1 PROTECTION GLASS 206401

4 SUPPORT LEFT 206152

5 RUBBER FOOT 206411

6 SWITCH 206451

9 FIXING KNOB 206157

11 SPRING 206158

15 ROTATION WHEEL 206156

16 DRIVING WHEEL 206155

18 PROTECTION GLASS HOLDER 206154

Rating

Let us know what you think about the FERM BGM1010 Bench Grinder by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.

Are you satisfied with the FERM BGM1010 Bench Grinder?
Yes No

Be the first to rate this product

0 votes

Join the conversation about this product

Here you can share what you think about the FERM BGM1010 Bench Grinder. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

More about this manual

We understand that it’s nice to have a paper manual for your FERM BGM1010 Bench Grinder. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact FERM. They might be able to provide an original manual. Are you looking for the manual of your FERM BGM1010 Bench Grinder in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

Brand	FERM
Model	BGM1010
Category	Bench Grinders
File type	PDF
File size	0.46 MB

All manuals for FERM Bench Grinders
More manuals of Bench Grinders

Frequently Asked Questions about FERM BGM1010 Bench Grinder

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.

Can I store power tools in a shed or garage? Verified

In general, you can store power tools in a shed or garage, even if it sometimes freezes there. However, it is better for the lifespan of the power tool to store it in a dry place without major temperature fluctuations. In a shed or garage, differences in temperature can cause condensation to form, which can cause rust. In addition, tools that run on batteries last shorter and do not charge as well at very low temperatures. To be sure how your power tool needs to be stored, always thoroughly read the user manual.

This was helpful (2) Read more