After my dishwasher has finished it's cycle, the container that holds the tablet hasn't opened. How is this possible?

"This problem is often caused by dishes that are blocking the container. Check this before turning on the dishwasher."

This was helpful (8060)

Mihai 15-10-2023
Aurel
Hello! The flap on the detergent box does not stay closed, what is the cause?

reply | This was helpful (77)(Translated by Google)
Fóris Imre 15-10-2023
elektrolux ESF 63021
Lower basket roller pins are worn, rollers always fall out how to get roller pin and roller. Dishwasher tablet door does not stay closed, how to fix it

This was helpful (25)(Translated by Google)
Jordi 11-04-2024
Bosch elegance plus
Hello, when my dishwasher finishes its cycle, the compartment door will not open and the tablet is still intact, which is why

reply | This was helpful (50)(Translated by Google)
Aurel 15-10-2023
Ariston hotpoint 216 A
Hello! The flap on the detergent box does not stay closed, what is the cause? It's been that way since I bought it

reply | This was helpful (37)(Translated by Google)
Sören Carlsson 01-10-2023
Whirpol 3550 851177161820
How do I empty the dishwasher of water before the winter? How to change the drain pump?

reply | This was helpful (29)(Translated by Google)
Ria smit 19-11-2023
Siemens SN61 IX09TN
How should I set half load for a very short program?

reply | This was helpful (26)(Translated by Google)
JP 29-11-2023
Servis
If the dishwasher has finished it's cycle and the container that holds the tablet hasn't opened, that means something is blocking the rotating spray. Before closing the door, turn it manually to make sure nothing is on the way.

reply | This was helpful (22)
DAVE P 29-11-2023
HOTPOINT HIC 3C33 CWE UK
Nothing is blocking the flap from opening and the rotating spray moves freely so your answer doesn’t ‘t solve the flap not opening.Is the flap opened by an electronic switch?

This was helpful (24)
Paul Carroll 29-12-2023
Whirlpool WIC3C26NUK
Power button is flashing and all other buttons are unresponsive. also hearing a gurgling/sucking noise from the machine. Tablet didn't release but crockery looks like it was washed. have tried to reset by turning off the power but to no avail

reply | This was helpful (21)
MOHAMED KHALED 28-11-2023
Arçelik 9252 ML
The dishwasher does not work and when I turn it on, the message P1 appears. I did not know what the problem was and the type of the dishwasher, Arçelik 9252 Ml.

reply | This was helpful (14)(Translated by Google)
antonio geirinhas 09-01-2024
indesit modelo idl 50
When the problem began with the dishwasher, the green light would come on and when the engine started running the light would go out and the machine would turn off. Now after several attempts, it no longer turns on. What's the problem with it? Thank you for your help, Antonio Geirinhas

reply | This was helpful (10)(Translated by Google)
Elena 14-12-2023
Zanussi Tehnology TP5
The red indicator light came on, what does this mean?

reply | This was helpful (10)(Translated by Google)
VALERIE TANGUY 24-08-2024
WIC3B16
Hello, once the cycle is finished, I find the detergent tablet in the dishwasher. It is intact. Is there anything to do? Thank you for your feedback

reply | This was helpful (7)(Translated by Google)
Do Christ 25-12-2023
Siemens Spülmaschine SN56N582EU/86
The rinse water is no longer pumped out

reply | This was helpful (7)(Translated by Google)
szilagyi andras 25-12-2023
gorenjeGS52040S
does not pump out the water after washing

This was helpful (7)(Translated by Google)
karl May 12-06-2024
BFC 3c26 PFA
Halfway through the program, the dishwasher always stops at 1.42 hours. The remaining running time can only be switched off and the water is then pumped out before the device switches off. Several restarts were unsuccessful because the device automatically went into sleep mode after 1.42 hours

reply | This was helpful (5)(Translated by Google)
Heinrich Artmann 12-06-2024
Privileg PDSI Edition 50
Our dishwasher displays error H20. The possible errors stated in the operating instructions were checked and no errors could be identified. The water flows into the device and everything still seems to be OK when pumping it out. to be. After Once the water has flowed in again, the device whistles and no longer runs. Sometimes it whistles while the water is flowing in This is the same for every program What is the actual error here?

This was helpful (2)(Translated by Google)
Mauro calisse 21-03-2024
Biko lavastoviglie
How do you understand that the cycle is over?

reply | This was helpful (5)(Translated by Google)
Pierrette Gamache 31-08-2024
L G LDS5040WW
Same problem. When the cycle is finished, part of the soap tablet remains in the compartment. What should I do?

reply | This was helpful (3)(Translated by Google)
Gun-Britt 30-11-2023
Ikea diskmaskin
Can't change the temperature on the program panel.

reply | This was helpful (3)(Translated by Google)
Dimitar Kamov 05-10-2024
SIEMENS SX56N551CH/01
E 24 appears when the machine is ready. dishes are not dried and sometimes not washed well.

reply | This was helpful (0)(Translated by Google)