Manual Evolution R185 SMS+ Mitre Saw

Manual

(2.5) 4) General Power Tool Safety Warnings

[Power tool use and care].

a) Do not force the power tool. Use the correct

power tool for your application. The correct

power tool will do the job better and safer at a rate

for which it was designed.

b) Do not use the power tool if the switch does

not turn it on or off. Any power tool that cannot

be controlled with the switch is dangerous and

must be repaired.

c) Disconnect the power tool from the

power source and/or battery pack from the

power tool before making any adjustments,

changing accessories, or storing power tools.

Such preventative safety measures reduce the risk

of starting the power tool accidentally.

d) Store idle power tools out of the reach of

children and do not allow persons unfamiliar

with the power tool or these Instructions

to operate the power tool. Power tools are

dangerous in the hands of untrained users.

e) Maintain power tools. Check for

misalignment or binding of moving parts,

breakage of moving parts and any other

condition that may affect the power tools

operation. If damaged, have the power tool

repaired before use. Many accidents are caused

by poorly maintained power tools.

f) Keep cutting tools sharp and clean. Properly

maintained cutting tools with sharp cutting edges

are less likely to bind and are easier to control.

g) Use the power tool, accessories and tool

bits etc. in accordance with these instructions,

taking into account the working conditions

and the work to be performed. Use of the

power tool for operations different from those

intended could result in a hazardous situation.

h) Keep handles and grasping surfaces dry,

clean and free from oil and grease. Slippery

handles and grasping surfaces do not allow for

safe handling and control of the

tool in unexpected situations.

(2.6) 5) General Power Tool Safety Warnings

[Service] a) Have your power tool serviced by

a qualified repair person using only identical

replacement parts. This will ensure that the

safety of the power tool is maintained. If the

supply cord of this power tool is damaged, it must

be replaced by a specially prepared supply cord

available through the service organization.

2.7 HEALTH ADVICE

WARNING: If you suspect that paint on surfaces

in your home contains lead seek professional

advice. Lead based paints should only be

removed by a professional and you should not

attempt to remove it yourself.

Once the dust has been deposited on surfaces,

hand to mouth contact can result in the ingestion

of lead. Exposure to even low levels of lead can

cause irreversible brain and nervous system

damage. The young and unborn children are

particularly vulnerable.

(2.8) WARNING: Some wood and wood type

products, especially MDF (Medium Density

Fibreboard), can produce dust that may be

hazardous to your health. We recommend the

use of an approved face mask with replaceable

filters when using this machine, in addition to

using the dust extraction facility.

3.5 MITRE SAW SPECIFIC SAFETY

• Not to use saw blades manufactured from

high speed steel.

• Use only the saw with guards in good

working order and properly maintained, and

in position.

• Always to clamp work-pieces to the saw table.

a) Mitre saws are intended to cut wood or

wood-like products, they cannot be used

with abrasive cut-o wheels for cutting ferrous

material such as bars, rods, studs,etc. Abrasive

dust causes moving parts such as the lower guard

to jam. Sparks from abrasive cutting will burn the

lower guard, the kerf insert and other plastic parts.

b) Use clamps to support the workpiece

whenever possible. If supporting the

workpiece by hand, you must always keep your

hand at least 150mm from either side of the

saw blade. Do not use this saw to cut pieces

that are too small to be securely clamped or

held by hand. If your hand is placed too close to

the saw blade, there is an increased risk of injury

from blade contact.

c) The workpiece must be stationary and

clamped or held against both the fence and

the table. Do not feed the workpiece into the

blade or cut “freehand” in any way. Unrestrained

or moving workpieces could be thrown at high

speeds, causing injury.

7

www.evolutionpowertools.com

EN

Rating

More about this manual

We understand that it’s nice to have a paper manual for your Evolution R185 SMS+ Mitre Saw. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Evolution. They might be able to provide an original manual. Are you looking for the manual of your Evolution R185 SMS+ Mitre Saw in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

All manuals for Evolution Mitre Saws
More manuals of Mitre Saws

Frequently Asked Questions about Evolution R185 SMS+ Mitre Saw

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.

Related products

Manual

Evolution RAGE3-S Mitre Saw

Manual

Evolution RAGE3-DB Mitre Saw

Manual

Einhell TE-MS 18/210 Li-Solo Mitre Saw

Manual

Stayer SC 241 W Mitre Saw

Manual

Graphite 59G806 Mitre Saw

Manual

Ryobi CMS1825L Mitre Saw

Manual

DeWalt DHS716AT2 Mitre Saw

Manual

DeWalt DWS715 Mitre Saw

Related categories