Home > Camping & Outdoor > Tents > Eureka Tents > Eureka Tundern Cove 4 Tent

Manual Eureka Tundern Cove 4 Tent

Need a manual for your Eureka Tundern Cove 4 Tent? Below you can view and download the PDF manual for free in English. This product currently has 7 frequently asked questions, 0 comments and has 0 votes. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

1. Unroll your tent and separate the tent from the ﬂy. Assem-

ble the frame poles being sure all connections are com-

plete.

2. Spread out the tent in desired site location. Stake corner

facing into wind in windy conditions.

3. Insert tent corner pin into the end of one of the long tent

poles. Follow up tent seam, locate ﬁrst clip and attach to

pole. Move to the opposite corner repeating the process

4. Repeat step 3 with the second long frame pole.

5. Attach remaining clips to frame.

6. Tent can now be staked in location.

7. Spread the ﬂy sheet over the tent positioning the vestibule

over the front tent door. Front side will have yellow web-

bing at corner of the tent, the front corners will have two

pins, one for main frame and one for vestibule pole.

8. Feed the vestibule pole through the vestibule pole sleeve

always pushing, never pulling.

9. Take one end of the vestibule pole and insert a pin into the

pole end. The pin will be located on the corner ring of the

tent.

10. Repeat step 9 with the other end of the pole. During this

step the vestibule pole will ﬂex into a hoop.

11. Attach all four ﬂy sheet corners, with the hooks provided,

to the four tent corner rings.

12. Stretch out the vestibule and stake out using the two fabric

loops

13. On each side and the back of the tent are positions sup-

plied to pull out the ﬂy sheet and stake. The back has a rear

single point vestibule.

14. On the underside of the tent ﬂy sheet locate the Velcro fas-

teners and wrap around the tent poles.

15. If required, for windy conditions you can use the pre-

rigged guylines to stake out for more stability.

ASSEMBLY INSTRUCTIONS for Tundern Cove 4

Important

• Please set up your tent prior to your ﬁrst trip to ensure you

are familiar with set up and the tent is in proper condition.

• Always choose a site with good drainage. Inspect the site and

remove any sharp or protruding objects that could damage

the tent ﬂoor.

• Although major seams are taped we recommend seam seal-

ing guy out locations due to stitching through tape, and any

other seams where taping may not have been possible

1. The suns UV rays can be harmful even with technical ad-

vances in fabrics. Prolonged exposure could result in fading

and possibly fabric disintegration. When choosing a site try

to pitch the tent in a shaded area. Do not leave a tent up

longer than necessary.

2. Fuels can damage tents as can DEET found in many insect

repellents.

3. All major seams are factory taped. Over time seams could

experience delamination. Simply clean the seam and apply

seam sealer that can be purchased at most outdoor stores.

4. Avoid storing your tent in a hot location.

5. Please be sure to store your tent dry. Mildew can occur on

waterproof coatings if stored when wet.

TIPS

SET UP

Rating

Let us know what you think about the Eureka Tundern Cove 4 Tent by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.

Are you satisfied with the Eureka Tundern Cove 4 Tent?
Yes No

Be the first to rate this product

0 votes

Join the conversation about this product

Here you can share what you think about the Eureka Tundern Cove 4 Tent. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

More about this manual

We understand that it’s nice to have a paper manual for your Eureka Tundern Cove 4 Tent. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Eureka. They might be able to provide an original manual. Are you looking for the manual of your Eureka Tundern Cove 4 Tent in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

Brand	Eureka
Model	Tundern Cove 4
Category	Tents
File type	PDF
File size	0.18 MB

All manuals for Eureka Tents
More manuals of Tents

Frequently Asked Questions about Eureka Tundern Cove 4 Tent

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.

Can I store my tent when it's wet? Verified

Only for very short periods of time. When a tent is stored while wet for a week or longer, it can get moldy. This is harmful for your tent and possibly your health.

This was helpful (384) Read more

How do I impregnate a tent? Verified

Pitch the tent, clean the cloth and let it dry. Apply the impregnation agent on the cloth with a plant sprayer or other spray. It is also possible to use a paint roller or brush. The cloth needs to be fully saturated with the impregnation agent. Also treat the inside of the tent. Thoroughly clean any windows with a moist cloth. Do not let the impregnation agent dry on it. Let the tent cloth fully dry. Repeat the treatment if needed.

This was helpful (285) Read more

Can I repair a tear or hole in the canvas of my tent myself? Verified

There are special pieces of self-adhesive patches of cloth available for synthetic tent canvases. Stick one of these patches on both sides of the hole or tear. For cotton tent canvases or mixed material tent canvases it's best to use patches that can be ironed on. This will require an iron.

This was helpful (218) Read more

The zipper of my tent won't run smoothly, what can I do? Verified

When a zipper is running smoothly, use a dry PTFE spray or silicone spray. Do not spray onto the cloth and preventively spray to prevent future problems.

This was helpful (156) Read more

There are water drops on the inside of the tent, does this mean it is leaking? Verified

No, this is probably condensation. Make sure the tent is properly ventilated to keep condensation at a minimum.

This was helpful (129) Read more

What tent pegs are best to use for which surfaces? Verified

On grassland or forest surfaces you can use semi circular or plastic pegs. On rocky surfaces you need to use rock pegs. On clay surfaces you can use semi circular, plastic or universal pegs. On gravel surfaces you need semi circular or universal pegs and on sand you need to use wooden pegs.

This was helpful (105) Read more

The impregnation agent leaves white stains or a white haze on the tent cloth, what can I do about this? Verified

If the agent leaves a white haze or white stains on the tent cloth, this means you have applied more impregnation agent on those areas. This is not harmful and the stains often disappear over time. It is not advisable to use less impregnation agent to prevent stains. The cloth needs to be fully saturated with the impregnation agent to give good results.

This was helpful (97) Read more