Home > Camping & Outdoor > Tents > Eureka Tents > Eureka Jade Canyon 6 Tent

Manual Eureka Jade Canyon 6 Tent

Need a manual for your Eureka Jade Canyon 6 Tent? Below you can view and download the PDF manual for free in English. This product currently has 7 frequently asked questions, 0 comments and has 0 votes. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

Contents of Carry bag

Tent body

Tent fly

Pole bag:4 steel straight poles (leg poles)

2 long bright green aluminum poles (roof poles)

Stake bag: 8 steel skewer stakes

E!LUMINATE SYSTEM: 2 silver panels

Eureka! Media Center (gear hammock with clear panel)

Gear Hammock

1. Spread the tent body out, floor side down. Locate the yellow webbing

stake out loop, as this marks the right front corner of the tent. Also locate

the black plastic elbow hub & grey fabric roof pole sleeves which cross in the

top center of the tent body.

2. Assemble the two bright green aluminum roof poles

3. Starting at the corner with the yellow webbing stake out loop, follow the

sewn seam past the plastic hub and insert one of the poles into the grey

fabric pole sleeve. Continue sliding the pole through the sleeve until it

reaches the black plastic hub at the opposite corner. Insert the pole ends

into the hub opening which has internal ribs. (NOTE: the other hub opening

is smooth & is used for the larger diameter leg poles.) Repeat process with

the second pole & sleeve. Correctly threaded, the poles will make a large X

shape, crossing in the middle of the tent.

4. Assemble the four leg poles & place one at each corner of the tent.

5. Starting at the yellow webbing stake out loop, insert the open end of the

leg pole into the smooth opening of the black plastic hub. Raising the pole &

hub, reach down and insert the tip of the pole into the outer-most grommet

(metal ring) on yellow webbing stake out loop. Moving to another corner,

repeat process with second pole, then a third, & lastly the fourth. Your tent

will now be standing.

6. Walk around the tent and connect all of the black plastic clips to their

respective poles.

Attaching the Fly Sheet

1. Unfold the fly & drape it over the tent matching the yellow

webbing on the fly with the yellow webbing on the tent body.

Align and center the fly on the tent body so the fly’s seams follow

the tent body’s poles.

2. Clip together the side-release buckle on the yellow webbing,

joining the fly to the tent body.

3. Locate the bright green triangular wing at the upper corner of

the fly. Reaching under the wing, wrap the hook/loop closure

around the underlying pole to secure the fly to the pole. Farther

down the pole & fly is another the hook/loop closure. Also wrap

this hook/loop closure around the pole to secure the fly to the

pole.

4. Repeat wrapping the hook/loop closures around all of the

three remaining leg poles to secure the fly to the tent’s pole

structure.

5. Clip together the side-release buckle on the three remaining

black webbing stake out loops.

6. Walk around the tent & equally tension all four corner

webbings by pulling the webbing through the buckle to tension

the fly.

7. Guyouts: The bright green triangular wings also contain

pockets which store the pre-attached guyout cords. Remove the

cord from the pocket & extend it to full length. Secure the guyout

cord to the ground with a stake. In high winds, an additional

guyout cord can be attached to the small black webbing loop

halfway up the leg pole. Get in the habit of always using the

guyouts even in good weather.

7. Secure the tent to the ground using the stakes provided. Start at the

yellow webbing stake out loop, next proceed to the diagonally opposite

corner. While firmly pulling on the black webbing stake out loop,

hammer in the stake. Repeat process with the other two corners.

8. The tent body will now be erect, properly tensioned, and secured to

the ground.

Eureka! Set-Up Instructions

Jade Canyon 4 (#2601276)

Jade Canyon 6 (#2601281)

REV 082714

Setting up the Tent Body

E!Luminate System:

Increases the brightness of floor-level lighting provided by LED lanterns

inside the tent. Two removable triangular silver-reflective E!Luminate

panels install in the ceiling with O-rings & toggles The panels reflect a

lantern’s light downwards to the floor, increasing the brightness of

floor-level light up to 3 times. A reinforced webbing hang loop with D-ring

securely holds LED lanterns at the tent’s peak. An elegant, yet simple &

effective solution to brighten the nighttime camping experience.

NOTE: Only for use with battery powered LED lanterns.

EUREKA! Media Center:

Watch video on tablets & other small electronic devices from the comfort

of your sleeping bag. The clear center panel of the Media Center is

touchscreen friendly. The Media Center attaches with hooks to pre-in-

stalled O-rings located in each corner of the tent. Also secure the center

of the Media Center with the cord & hook to support heavier items.

Gear Hammock:

The gear hammock attaches with hooks to pre-installed O-rings located

in each corner of the tent. Secure the center of the hammock with the

cord & hook to support heavier items.

E! Power Port:

The zippered E! Power Port allows you to bring an electrical power cord

inside the tent.

Rating

Let us know what you think about the Eureka Jade Canyon 6 Tent by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.

Are you satisfied with the Eureka Jade Canyon 6 Tent?
Yes No

Be the first to rate this product

0 votes

Join the conversation about this product

Here you can share what you think about the Eureka Jade Canyon 6 Tent. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

More about this manual

We understand that it’s nice to have a paper manual for your Eureka Jade Canyon 6 Tent. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Eureka. They might be able to provide an original manual. Are you looking for the manual of your Eureka Jade Canyon 6 Tent in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

Brand	Eureka
Model	Jade Canyon 6
Category	Tents
File type	PDF
File size	0.65 MB

All manuals for Eureka Tents
More manuals of Tents

Frequently Asked Questions about Eureka Jade Canyon 6 Tent

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.

Can I store my tent when it's wet? Verified

Only for very short periods of time. When a tent is stored while wet for a week or longer, it can get moldy. This is harmful for your tent and possibly your health.

This was helpful (384) Read more

How do I impregnate a tent? Verified

Pitch the tent, clean the cloth and let it dry. Apply the impregnation agent on the cloth with a plant sprayer or other spray. It is also possible to use a paint roller or brush. The cloth needs to be fully saturated with the impregnation agent. Also treat the inside of the tent. Thoroughly clean any windows with a moist cloth. Do not let the impregnation agent dry on it. Let the tent cloth fully dry. Repeat the treatment if needed.

This was helpful (285) Read more

Can I repair a tear or hole in the canvas of my tent myself? Verified

There are special pieces of self-adhesive patches of cloth available for synthetic tent canvases. Stick one of these patches on both sides of the hole or tear. For cotton tent canvases or mixed material tent canvases it's best to use patches that can be ironed on. This will require an iron.

This was helpful (218) Read more

The zipper of my tent won't run smoothly, what can I do? Verified

When a zipper is running smoothly, use a dry PTFE spray or silicone spray. Do not spray onto the cloth and preventively spray to prevent future problems.

This was helpful (156) Read more

There are water drops on the inside of the tent, does this mean it is leaking? Verified

No, this is probably condensation. Make sure the tent is properly ventilated to keep condensation at a minimum.

This was helpful (129) Read more

What tent pegs are best to use for which surfaces? Verified

On grassland or forest surfaces you can use semi circular or plastic pegs. On rocky surfaces you need to use rock pegs. On clay surfaces you can use semi circular, plastic or universal pegs. On gravel surfaces you need semi circular or universal pegs and on sand you need to use wooden pegs.

This was helpful (105) Read more

The impregnation agent leaves white stains or a white haze on the tent cloth, what can I do about this? Verified

If the agent leaves a white haze or white stains on the tent cloth, this means you have applied more impregnation agent on those areas. This is not harmful and the stains often disappear over time. It is not advisable to use less impregnation agent to prevent stains. The cloth needs to be fully saturated with the impregnation agent to give good results.

This was helpful (97) Read more