Home > Home & Decoration > Faucets > Elkay Faucets > Elkay LKD2442C Faucet

Manual Elkay LKD2442C Faucet

Need a manual for your Elkay LKD2442C Faucet? Below you can view and download the PDF manual for free in English. This product currently has 1 frequently asked question, 0 comments and has 0 votes. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

SPOUT ASSEMBLY

CARTRIDGE NUT

CARTRIDGE/VALVE

HANDLE

ALIGNMENT

SCREW

HANDLE

INSTALL

TEMPERATURE

INDICATOR

RING

LOGO

SET SCREW

SPRAY HEAD

HOSE GUIDE

WASHER

LOCK NUT

HOSE

DIVERTER

INSTALL

SPOUT

WASHER

Elkay recommends installation by a licensed plumber.

Install Spray and Hose (if included)

1. Remove locknut and washer from sprayer base assembly and

place assembly in far right hole of sink deck. Reassemble washer

and locknut on shank from under sink. Tighten.

2. Insert hose through sprayer base assembly then route back up

through the center hole for the faucet. Thread hose onto faucet

and tighten.

Install Faucet

1. Be sure mounting surface is clean and dry. Apply plumbers

putty or silicon sealer to bottom of escutcheon gasket.

2. Place faucet shanks through holes in sink.

3. Fasten faucet to deck from underneath sink using washers and

nuts. Tighten.

4. Clean extra plumbers putty or silicone from around escutcheon.

5. Connect supply lines to faucet shanks and tighten.

6. Place washer on the waterway spout connector and thread spout

assembly by hand until snug.

7. Remove aerator from spout and Flush water lines to remove dirt

and sediment from water lines. Replace aerator.

Install Handles (if required)

1. Ensure cartridge (valve) is in the “off” position. (Fully counter

clockwise for Cold and Fully clockwise for Hot.)

2. Insert handle over cartridge stem

3. Insert alignment screw in handle hole towards back of sink. Screw

in only half way.

4. Place Red Temperature Indicator Ring in the top of the hot side

handle and the Blue ring in the top of the Cold side handle.

5. Place Logo part in top of both handles so logo can be read from

front of sink.

6. Thread handle set screw into each handle and tighten.

Change Diverter Valve (If Side Sprayer Equipped)

1. From top of sink, Unscrew spout and pull upward to remove.

2. Unscrew waterway spout connector from main waterway (Wrench

flats provided).

3. Pull diverter valve out of waterway and replace with new diverter in

same orientation.

4. Thread waterway spout connector into main waterway and tighten.

5. Thread spout assembly on waterway and hand tighten.

Rating

Let us know what you think about the Elkay LKD2442C Faucet by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.

Are you satisfied with the Elkay LKD2442C Faucet?
Yes No

Be the first to rate this product

0 votes

Join the conversation about this product

Here you can share what you think about the Elkay LKD2442C Faucet. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

More about this manual

We understand that it’s nice to have a paper manual for your Elkay LKD2442C Faucet. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Elkay. They might be able to provide an original manual. Are you looking for the manual of your Elkay LKD2442C Faucet in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

Brand	Elkay
Model	LKD2442C
Category	Faucets
File type	PDF
File size	0.69 MB

All manuals for Elkay Faucets
More manuals of Faucets

Frequently Asked Questions about Elkay LKD2442C Faucet

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.

The water from the faucet will only get lukewarm, what can I do? Verified

Assuming there is no issue with the supply of warm water it could be that there are mineral buildups in the faucet. This can obstruct temperature regulation. It is also possible that the mechanism inside the faucet it broken. In that case it will probably have to be replaced.

This was helpful (433) Read more