Home > Home & Decoration > Faucets > Elkay Faucets > Elkay LKD2423BHC Faucet

Manual Elkay LKD2423BHC Faucet

Need a manual for your Elkay LKD2423BHC Faucet? Below you can view and download the PDF manual for free in English. This product currently has 1 frequently asked question, 0 comments and has 0 votes. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

SPOUT ASSEMBLY

CARTRIDGE NUT

CARTRIDGE/VALVE

HANDLE

ALIGNMENT

SCREW

HANDLE

INSTALL

FLANGE

FLANGE GASKET

LOCK NUT

TEMPERATURE

INDICATOR

RING

LOGO

SET SCREW

SPACER

RING

WEDGE

Elkay recommends installation by a licensed plumber.

Install Spray and Hose (if included)

1. Remove locknut and washer from sprayer base assembly and

place assembly in far right hole of sink deck. Reassemble washer

and locknut on shank from under sink. Tighten.

2. Insert hose through sprayer base assembly then route back up

through the center hole for the faucet. Thread hose onto faucet

and tighten.

Install Faucet

1. Be sure mounting surface is clean and dry.

2. Prepare waterway; Make sure handles, cartridge nuts and flanges

are removed and the locknuts are threaded down to the bottom.

3. From under sink, insert waterway assembly up through sink faucet

drillings. From topside, Put flange gaskets on waterway, then thread

flanges onto waterway with about 1/8” of threads showing.

4. Thread cartridge nuts onto cartridges and tighten.

5. Unscrew the flanges until they are snug against the cartridge nuts.

6. From under sink, tighten locknuts against sink.

7. Place spacer ring and wedge inside waterway spout connector. (See

Change Faucet Rotation procedure)

8. Thread spout assembly on waterway and hand tighten.

9. Connect supply lines to faucet shanks and tighten.

10. Remove aerator from spout and Flush water lines to remove dirt and

sediment from water lines. Replace aerator.

Install Handles (if required)

1. Ensure cartridge (valve) is in the “off” position. (Fully counter

clockwise for Cold and Fully clockwise for Hot.)

2. Insert handle over cartridge stem

3. Insert alignment screw in handle hole towards back of sink. Screw

in only half way.

4. Place Red Temperature Indicator Ring in the top of the hot side

handle and the Blue ring in the top of the Cold side handle.

5. Place Logo part in top of both handles so logo can be read from

front of sink.

6. Thread handle set screw into each handle and tighten.

Change Faucet Rotation

1. Unscrew spout and pull upward to remove.

2. Using a finger, reach inside the waterway and pull out the wedge and

spacer ring.

3. Select the spacer ring with the desired rotation and insert into waterway.

4. Install the wedge into the waterway, making sure to align the two different

size “keys” (slots) inside the waterway with those on the wedge. (It would

help to use long nose pliers to seat the wedge, however, placing the wedge

on a finger and guiding it into the waterway also works.) Angle small side of

wedge to contact key slot first. Rest wedge in place on spacer ring. See

FIGURE 1.

5. Make sure the white wear ring is seated around the base of the spout.

Push the spout straight into the waterway, aligned 90° from handles.

6. Thread spout base onto waterway and Rotate the spout several degrees left

and right while hand tightening

FIGURE 1

Rating

Let us know what you think about the Elkay LKD2423BHC Faucet by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.

Are you satisfied with the Elkay LKD2423BHC Faucet?
Yes No

Be the first to rate this product

0 votes

Join the conversation about this product

Here you can share what you think about the Elkay LKD2423BHC Faucet. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

More about this manual

We understand that it’s nice to have a paper manual for your Elkay LKD2423BHC Faucet. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Elkay. They might be able to provide an original manual. Are you looking for the manual of your Elkay LKD2423BHC Faucet in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

Brand	Elkay
Model	LKD2423BHC
Category	Faucets
File type	PDF
File size	0.7 MB

All manuals for Elkay Faucets
More manuals of Faucets

Frequently Asked Questions about Elkay LKD2423BHC Faucet

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.

The water from the faucet will only get lukewarm, what can I do? Verified

Assuming there is no issue with the supply of warm water it could be that there are mineral buildups in the faucet. This can obstruct temperature regulation. It is also possible that the mechanism inside the faucet it broken. In that case it will probably have to be replaced.

This was helpful (431) Read more