Home > Home & Decoration > Faucets > Elba Faucets > Elba ETC-E3600 Faucet

Manual Elba ETC-E3600 Faucet

Need a manual for your Elba ETC-E3600 Faucet? Below you can view and download the PDF manual for free in English. This product currently has 1 frequently asked question, 0 comments and has 0 votes. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

Loading…

1. An opening hole of 25mm diameter is required on sink top or work top (D) for installation of tap.
2. Slide the rubber O-ring (C) over the threaded tube (B) and up to the base of tap (A).
3. Insert the threaded tube (B) through the hole of sink top or work top (D) and position the tap properly.
4. Slide the rubber O-washer (E) and metal O-washer (F) over the threaded tube (B) and up to the underside
of sink top or work top (D).
5. Screw and fasten the fixing nut (G). Please ensure the fixing
nut (G) is tightened securely.
6. Connect the flexi hose (I) with rubber O-washer (H) to threaded tube (B) on one end and the water supply
on the other end.
ETC-E3300 ETC-E3400 ETC-E3600
●Before installation, please ensure that the following work
conditions are adhered to:
-Water temperature between 0˚C - 90˚C
-Water pressure between 0.05MPa – 1.0MPa. Pressure reducing
valve is necessary if pressure exceeds 1.2MPa
-Avoid major pressure differences between hot and cold water
supply
●Flush pipes thoroughly before and after installation to ensure
water supply is free of any debris.
●Inspect tap fitting and debugged to its best. Do not attempt to
disassemble fitting on your own.
●Use thread sealant tape (PTFE) on any screw joining
connections and ensure all joints are securely tightened.
This . FIAMMA SDN. BHD. will not be held responsible for the use of superseded or voided specifications.
Fabricatoe must check for cut-out accuracy.
specification is subject to change without notice
Stainless Steel Mixer Tap
Download manual in English (PDF, 0.93 MB)
(Consider the environment and only print this manual if it is really necessary)

Loading…

Rating

Let us know what you think about the Elba ETC-E3600 Faucet by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.
Are you satisfied with the Elba ETC-E3600 Faucet?
Yes No
Be the first to rate this product
0 votes

Join the conversation about this product

Here you can share what you think about the Elba ETC-E3600 Faucet. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

More about this manual

We understand that it’s nice to have a paper manual for your Elba ETC-E3600 Faucet. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Elba. They might be able to provide an original manual. Are you looking for the manual of your Elba ETC-E3600 Faucet in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

Brand Elba
Model ETC-E3600
Category Faucets
File type PDF
File size 0.93 MB

All manuals for Elba Faucets
More manuals of Faucets

Frequently Asked Questions about Elba ETC-E3600 Faucet

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.

The water from the faucet will only get lukewarm, what can I do? Verified

Assuming there is no issue with the supply of warm water it could be that there are mineral buildups in the faucet. This can obstruct temperature regulation. It is also possible that the mechanism inside the faucet it broken. In that case it will probably have to be replaced.

This was helpful (430) Read more
Manual Elba ETC-E3600 Faucet