STAND FAN
MODEL: ESF-K1678(MR)
Owner’s Manual
Please read this manual carefully
before operating your set.
Retain it for future reference.
Record model number and serial
number of the set.
See the label attached on the set and
quote this information to your dealer
when you require service.
For The Warranty Terms & Conditions, Please Refer To Warranty Certificate.
REMOVE ALL PACKING MATERIALS FROM THIS PRODUCT BEFORE USING
IT.
THIS APPLIA NCE MUST BE INSTALLE D ON A FLAT SURFAC E. PLEASE
ENSURE THE ELECTRIC SUPPLY TO THIS APP LIANCE IS DISCONNECTED
Please read this instruction carefully. It is advisable to keep this instruction manual
in a safe place for future reference.
SAFETY PREC AUTIONS
1. Keep electrical appliances out of reach from children. Do not let them operate the
appliances without supervision.
2. To protect against the risk of electri
cal shock, do not immerse the product, cord or
plug into water or any other liquid.
3. This product is for household and indoor use only.
4. This product is not intended for use by person (including children) with reduced
physical, sensory or mental capabilities unless they have been given supervision
or instruction concerning use of the appliance by a person responsible for their
safety.
5. If the power cord or plug is damaged, it must be replaced by the service center or
a qualified service technician to avoid hazard.
WARNI NG - to reduce the risk of fire, electrical shock or injury to p
ersons or
property, please read and follow below instructions carefully.
Ÿ Always operate the product from a power source of the same voltage, frequency
and rating as indicated on the product identification marking.
Ÿ Do not operate this product if it has malfunctioned, damaged cord or plug or
appears damaged in any way. Return the complete product to the place of
purchase for inspection, repair or replacement.
Ÿ This product should not be used in the immediate vicinity of water, such as
bathtub, washbowls, swimming pool etc, where the likelihood of immersion or
splashi
ng could occur.
Ÿ Always switch off and unplug the plug from outlet when not in use, before
assembling or disassembling parts and before cleaning. Fully assemble the fan
before operating.
Ÿ Avoid contacting with moving parts. Do not insert any object through the guard
when the fan is operating.
Ÿ Do not cover the guard or operate in close proximity to curtains, etc.
Ÿ Always disconnect the fan when moving it from one location to another.
ASSEMBLY INSTRUCTIONS
1. Open the gift box and check the parts by referring to the product description
drawing.
2. Insert the standing pole into the base and fasten the base screw. (Fig 1)
3. Loosen the height adjustment ring and adjust the internal pole to the desired
height. (Note: If you can’t see the internal pole, it may slide inside the standing
pole. You can pull it out. Fig 2)
4. Loosen the thumb screw on the back of the fan body and attach it to the internal
pole.
5. Fasten the thumb screw in alignment with the groove on the internal pole. (Fig 3)
WARNI NG: DO NOT IMMER SE THE APPLIANC
E INTO WATER. ENSURE
THAT THE FAN IS UNPLUGGED FROM THE POWER SUPPLY BEFORE
REMOVING THE GUARD.
MAIN SPECIFIC ATION
Voltage
Rated Power
Fan Size
Motor
:
:
:
:
220-240V/50Hz
50W
16-inch
3-Speed
NOTICE
This product must not be disposed together with domestic waste. it has to be
disposed at an authorized place for recycling of electrical and electronic appliances.
By collecting and recycling waste, you help to save natural resources and make sure
the product is disposed in an environmental friendly and healthy way.
FAN BLAD E AND GUARDS ASSEMBLY
1. Remove the spinner & guard nut from the motor shaft. Fix the rear guard to the
front motor cover, then fasten the guard nut again. (Fig 4)
2. Fix the fan blade to the motor shaf
t and make sure the stopper pin is fit into
groove of the blade. Turn the spinner counter-clockwise to fasten the blade. (Fig
5)
3. Fix both fan guards with the guard ring and use a screwdriver to lock the screw.
(Fig 6)
OPERATING INSTRUCTION
1. Press buttons for speed control: “0" for OFF; “1" for Low
speed; “2" for Medium speed; “3" for High speed.
2. Press or pull up the OSC knob to control the fan oscillation.
(Fig 7)
3. The height of the fan can be changed by adjusting the internal
standing pole.
OS C knob
Fig 7
Loose
Fig 4
Tight
Fig 5
Tight
Slot
Stopper pin
Fig 6
Fig 3
Mounting slot
Clamp screw
Annular groove
Fig 1 Fig 2
Loose
PRODUCT DESCRIPTIONS
1 2
3
4
5
6 7 8 9
10
11
12
13
14
15
1. Centre ring
2. Front guard
3. Guard ring
4. Spinner
5. Fan blade
6. Guard nut
7. Rear guard
8. Motor
9. O SC knob
10. Speed button
11. Internal pole
12. Height adjustment ring
13. Standing pole
14. Round base
15. Base screw
CLEANING AND MAINTENANCE
Clean the appliance with a damp cloth with mild cleaner. Do not use chemical, steel,
wooden or abrasive cleaners to clean the appliance.
Join the conversation about this product
Here you can share what you think about the Elba ESF-K1678(MR) Fan. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.