Home > Business equipment > Laminators > Ednet Laminators > Ednet 91610 Laminator

Manual Ednet 91610 Laminator

Need a manual for your Ednet 91610 Laminator? Below you can view and download the PDF manual for free in English. This product currently has 0 frequently asked questions, 0 comments and has 0 votes. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

10. Do not insert any metal objects into the machine. Please do not grasp inside the

machine with your fingers.

11. The laminating machine is unsuitable for constant use commercially. It is recommended

to switch “O” the machine for 30 minutes, after it has been operating for a period of

approximately 30 minutes.

12. The socket should be near the device and easily accessible.

Starting up the laminating machine

1. Push the plug into the mains socket outlet and set the switch to ‘I’. The red LED (Power)

lights up and the heating process will begin.

2. The green LED (Ready) lights up after approximately 3 - 5 minutes. Now you can begin

the laminating process.

3. Open the laminating film and lay the material that is to be laminated directly onto the

closed side. Leave a margin of between 3 mm and 5 mm approximately beyond the

edges while doing so.

Caution

a) Choose a film of correspondingly suitable size in relation to the material that is to be

laminated respectively.

b) It is not recommended to process several smaller materials in one film.

c) Do not cut up the film before the laminating is done.

d) The material that is to be laminated, is not allowed to be thicker than 0.5 mm

including the film.

e) It is imperative to only laminate very thin or soft materials, like newspaper or

serviettes for example, with thicker films (100 microns). We recommend refraining

from any attempt to do so!

f) Do not insert any laminating film without the contents.

g) Never utilize laminating pockets on one side or when they are rolled up.

h) Only utilize laminating foils that are also described as such. Other kinds of film, like

transparent wallets for example, are unsuitable for laminating!

4. Insert the material within the laminating film straight and with the closed side first into

the feed opening on the machine’s front side. The material will feed it in automatically

now.

5. The laminated material that emerges from the delivery opening on the machine’s back

side is not allowed to be pulled out by force. Wait until it has run out of the machine

completely. Let the laminated material to cool down briefly!

6. Switch off the machine after the laminating has ended, by setting the switch to ‘O’. Let

the machine cool down and always pull the plug out of the mains socket outlet after

using the machine.

Note: Do not feed the laminator further with foil in case of a blockage. Turn off the device

immediately!

Rating

Let us know what you think about the Ednet 91610 Laminator by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.

Are you satisfied with the Ednet 91610 Laminator?
Yes No

Be the first to rate this product

0 votes

Join the conversation about this product

Here you can share what you think about the Ednet 91610 Laminator. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

More about this manual

We understand that it’s nice to have a paper manual for your Ednet 91610 Laminator. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Ednet. They might be able to provide an original manual. Are you looking for the manual of your Ednet 91610 Laminator in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.