Manual Dometic 964 Sanipottie Portable Toilet

Manual

4

960 SERIES PORTABLE TOILETS

Dometic marine toilet systems must be

installed according to Dometic’s recommended

procedures. Equipment damage, injury to

personnel or death could result from improper

installation. DOMETIC CORPORATION

ACCEPTS NO RESPONSIBILITY OR LIABILITY

FOR DAMAGE TO EQUIPMENT, OR INJURY OR

DEATH TO PERSONNEL THAT MAY RESULT

FROM IMPROPER INSTALLATION, SERVICE OR

OPERATION OF THIS PRODUCT.

WARNING!

HAZARD OF FLOODING – If the toilet

system is connected to ANY through-the-hull

ttings, properly installed seacocks MUST be

installed in all piping connected to through-the-

hull ttings. Seacocks MUST be easily accessible

to all users of the toilet system or secondary

valves fitted in hoses where they are easily

accessible. ALWAYS close seacocks when toilet

system is not in use (even if boat is unattended

for a brief period. All valves MUST be full bore

valves and marine quality. Screw-to-close gate

valves are not recommended. Failure to comply

can result in ooding which can cause loss of

property and life.

WARNING!

HAZARD OF FLOODING – If toilet is

connected to ANY through-the-hull ttings, ALL

exible hoses must be of marine sanitation quality

and must be secured to ANY ttings (such as

those at seacock, vented loop or toilet) with two

stainless steel, worm-drive hose band clamps at

each connection. Connections MUST be checked

frequently for integrity. Failure to comply can

result in flooding which can cause loss of

property and life.

WARNING!

HAZARD OF FLOODING – If toilet rim

is below the waterline at ANY time (during any

conditions of heel, load or trim) and is connected

to ANY through-the-hull fittings, properly

positioned ventilated (vented) loops MUST be

installed in discharge piping to prevent potential

back siphonage of seawater into the boat. Failure

to do so can result in ooding which can cause

loss of property and life.

INSTALLATION

Models 964, 965

Models 964MSD, 965MSD

WARNINGS

BE SURE TO READ INSTRUCTIONS COMPLETELY BEFORE INSTALLING PORTABLE TOILET.

1. Position portable toilet in desired location.

Make sure of adequate clearance for lid

and seat in “up” position and clearance at

the sides to unlatch and remove top tank.

2. Open side clasps by pulling outward at top

of side clasps.

3. Place hold-down brackets, with mounting

holes facing away from toilet, under the

tank and align with grooves. See Figure 1.

4. Use pencil or awl to mark location of hold-

down bracket mounting holes.

5. Remove portable toilet.

6. Attach hold-down brackets to the oor or

deck with screws provided.

7. Set portable toilet between brackets and

latch in place with side clasps.

MOUNTING BRACKETS

Figure 1

Rating

More about this manual

We understand that it’s nice to have a paper manual for your Dometic 964 Sanipottie Portable Toilet. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Dometic. They might be able to provide an original manual. Are you looking for the manual of your Dometic 964 Sanipottie Portable Toilet in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

All manuals for Dometic Portable Toilets
More manuals of Portable Toilets

Frequently Asked Questions about Dometic 964 Sanipottie Portable Toilet

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.

Related products

Manual

Dometic 975MSD Portable Toilet

Manual

Dometic 975 Portable Toilet

Manual

Dometic 965 Sanipottie Portable Toilet

Manual

Dometic 962 Sanipottie Portable Toilet

Manual

Dometic 966 Sanipottie Portable Toilet

Manual

Dometic 974 Portable Toilet

Manual

Dometic 972 Portable Toilet

Manual

Dometic 976 Portable Toilet

Related categories