Manual DeWalt DCHT826P1 Hedgecutter

Manual

ENGLISH

6

Installing and Removing the Battery Pack

(Fig. B)



WARNING: Ensure the tool/appliance is in the off

position before inserting the batterypack.

NOTE: For best results, make sure your battery pack is

fullycharged.

1. To install the battery pack

8

into the tool handle, align

the battery pack with the rails inside the tool’s handle

and slide it into the handle until the battery pack is firmly

seated in the tool and ensure that it does notdisengage.

2. To remove the battery pack from the tool, press the

battery pack release button

9

and firmly pull the

battery pack out of the toolhandle. Insert battery into

thecharger.

OPERATION



WARNING: To reduce the risk of serious personal

injury, turn unit off and remove the battery pack

before making any adjustments or removing/

installing attachments or accessories. An

accidental start‑up can causeinjury.

f

..................... wear eye protection

i

..................... Class II Construction

(double insulated)

g

..................... wear hearing

protection

a

..................... read all

documentation

..................... do not expose

to rain

n

..................... avoid staring

at light

l

or AC............alternating current

Ah ....................... amp hours

CSPM ..................

cut strokes per minute

Additional Safety Information



WARNING:

Never modify the power tool or any part of

it. Damage or personal injury couldresult.



WARNING: ALWAYS use safety glasses. Everyday

eyeglasses are NOT safety glasses. Also use face or dust

mask if operation is dusty. ALWAYS WEAR CERTIFIED

SAFETYEQUIPMENT:

• ANSI Z87.1 eye protection (CAN/CSA Z94.3),

• ANSI S12.6 (S3.19) hearing protection,

• NIOSH/OSHA/MSHA respiratoryprotection.



WARNING: Some dust contains chemicals known

to State of California to cause cancer, birth defects

or other reproductive harm. Some examples of these

chemicalsare:

• compounds in fertilizers,

• compounds in insecticides, herbicides andpesticides,

• arsenic and chromium from chemically treatedlumber.

To reduce your exposure to these chemicals, wear approved

safety equipment such as dust masks that are specially

designed to filter out microscopicparticles.

• Avoid prolonged contact with dust from power sanding,

sawing, grinding, drilling, and other construction

activities. Wear protective clothing and wash exposed

areas with soap and water. Allowing dust to get into your

mouth, eyes, or lie on the skin may promote absorption of

harmfulchemicals.



WARNING:

Use of this tool can generate and/

or disperse dust, which may cause serious and

permanent respiratory or otherinjury. Always use

NIOSH/OSHA approved respiratoryprotection.



WARNING: Always wear proper personal hearing

protection that conforms to ANSI S12.6 (S3.19)

during use. Under some conditions and duration

of use, noise from this product may contribute to

hearingloss.



CAUTION: When not in use, place tool on its

side on a stable surface where it will not cause a

tripping or falling hazard. Some tools with a large

battery pack will stand upright but may be easily

knockedover.

• Air vents often cover moving parts and should be

avoided. Loose clothes, jewelry or long hair can be caught in

movingparts.

• Keep air ventilation openings clear of debris.



WARNING: Only use with bail handle and blade guard

properly assembled to hedge trimmer. The use of the

hedge trimmer without the proper guard or handle

provided may result in serious personalinjury.

Proper Hand Position (Fig. C)



WARNING: To reduce the risk of serious personal

injury, ALWAYS use proper hand position asshown.



WARNING: To reduce the risk of serious personal

injury, ALWAYS hold securely in anticipation of a

suddenreaction.

Proper hand position requires one hand on the

mainhandle

3

and one hand on the bail handle

5

. Never

hold the unit by the blade guard

4

.

The label on your tool may include the following symbols. The

symbols and their definitions are asfollows:

BPM .................... beats per minute

V ......................... volts

min ..................... minutes

j

or DC ............direct current

…/min ..............per minute

RPM .................... revolutions

per minute

A ......................... amperes

Hz .......................hertz

W ........................watts

Wh ......................watt hours

n

o

.......................no load speed

n .........................rated speed

c

.....................safety alert symbol

h

..................... wear respiratory

protection

Switching On (Fig. A, C, D)



WARNING: Never attempt to lock a switch in the

ONposition.

1. Squeeze the bail handle switch

6

and the bail handle

5

with one hand so that the bail handle switch

6

is

pushed into the body of the bail handle

5

.

2. Push the lock off lever

2

forward and squeeze the trigger

switch 

1

. Once the unit is running, you may release the

lock off switch.

3. In order to keep the unit running you must continue to

squeeze the bail handle switch

6

and trigger switch

1

.

4. To turn the unit off, release the trigger switch

1

.

Trigger time out

The DCHT826 has a built in trigger time out feature.

1. If you release the trigger switch

1

but still hold the bail

handle switch

6

for longer than sixty seconds, and then

squeeze the trigger switch

1

the motor will not run. You

must release bail handle switch

6

, and trigger switch

1

.

Rating

More about this manual

We understand that it’s nice to have a paper manual for your DeWalt DCHT826P1 Hedgecutter. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact DeWalt. They might be able to provide an original manual. Are you looking for the manual of your DeWalt DCHT826P1 Hedgecutter in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

All manuals for DeWalt Hedgecutters
More manuals of Hedgecutters

Frequently Asked Questions about DeWalt DCHT826P1 Hedgecutter

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.

Related products

Manual

DeWalt DCHT820B Hedgecutter

Manual

DeWalt DCHT823B Hedgecutter

Manual

DeWalt DCPH820M1 Hedgecutter

Manual

DeWalt DCHT820P1 Hedgecutter

Manual

DeWalt DCHT826B Hedgecutter

Manual

DeWalt DCPH820B Hedgecutter

Manual

EGO HTX5300-P Hedgecutter

Manual

Primaster PMESH 1000 Hedgecutter

Related categories