Manual DeWalt DCG418SHDB Angle Grinder

Manual

ENGLISH

6



WARNING

• INGESTION HAZARD: This product

contains a button cell or coinbattery.

• DEATH or serious injury can occur

ifingested.

• A swallowed button cell or coin battery

can cause Internal Chemical Burns in as

little as 2hours.

• KEEP new and used batteries OUT OF

REACH ofCHILDREN.

• Seek immediate medical attention if

a battery is suspected to be swallowed or

inserted inside any part of thebody.

Remove and immediately recycle or dispose of used batteries

according to local regulations and keep away from children.

Do NOT dispose of batteries in household trash or incinerate.

Even used batteries may cause severe injury or death. Call a

to remove static and airborne dust could contaminate the

working environment or pose an increased health risk to the

operator and those in closeproximity.

• Use clamps or other practical ways to secure and

support the workpiece to a stable platform. Holding the

work by hand or against your body is unstable and may lead to

loss ofcontrol andinjury.

• Always use auxiliary handle. Tighten the handle securely.

The auxiliary handle should always be used to maintain control

of the tool at alltimes.

• To prevent the spindle end from contacting the bottom

of the hole of the hubbed wheel, use accessories that

have a threaded hole depth of at least 21mm. Failure to

use an accessory with the appropriate thread depth could result

in damage to the hubbed wheel and injury to the operator or

persons in thearea.

• The arbor size of hubbed wheels, flanges, backing

pads or any other accessory must properly fit the spindle

of the power tool. Accessories with arbor holes that do not

match the mounting hardware of the power tool will run out of

balance, vibrate excessively and may cause loss ofcontrol.

• Avoid bouncing the wheel or giving it rough treatment.

If this occurs, stop the tool and inspect the wheel for cracks

orflaws.

• Always handle and store wheels in a carefulmanner.

• Do not operate this tool for long periods of time.

Vibration caused by the operating action of this tool may cause

permanent injury to fingers, hands, and arms. Use gloves to

provide extra cushion, take frequent rest periods, and limit daily

time ofuse.

• Safety goggles or safety glasses with side shields and a

full face shield compliant with ANSI Z87.1 MUST be worn

by the operator and others that are within 50' (15.2 m) of

the use of thisproduct.

• Air vents often cover moving parts and should be

avoided. Loose clothes, jewelry or long hair can be caught in

movingparts.



CAUTION: When not in use, place tool on its side on a

stable surface where it will not cause a tripping or falling

hazard. Some tools with large battery packs will stand upright

on the battery pack but may be easily knockedover.

Additional Safety Information



WARNING: Never modify the power tool or any part of it.

Damage or personal injury couldresult.



WARNING: ALWAYS use safety glasses. Everyday

eyeglasses are NOT safety glasses. Also use face or dust

mask if cutting operation is dusty. ALWAYS WEAR CERTIFIED

SAFETYEQUIPMENT:

• ANSI Z87.1 eye protection (CAN/CSA Z94.3),

• ANSI S12.6 (S3.19) hearing protection,

• NIOSH/OSHA/MSHA respiratoryprotection.



WARNING:

Some dust created by power sanding, sawing,

grinding, drilling, and other construction activities contains

chemicals known to the State of California to cause cancer, birth

defects or other reproductive harm. Some examples of these

chemicalsare:

• lead from lead‑based paints,

• crystalline silica from bricks and cement and other masonry

products, and

• arsenic and chromium from chemically‑treatedlumber.

Your risk from these exposures varies, depending on how

often you do this type of work. To reduce your exposure to

these chemicals: work in a well ventilated area, and work with

approved safety equipment, such as those dust masks that are

specially designed to filter out microscopicparticles.



WARNING: Use of this tool can generate and/or disperse

dust, which may cause serious and permanent respiratory or

other injury. Always use NIOSH/OSHA approved respiratory

protection appropriate for the dust exposure. Direct particles

away from face andbody.



WARNING: Always wear proper personal hearing

protection that conforms to ANSI S12.6 (S3.19) during

use. Under some conditions and duration of use, noise from

this product may contribute to hearingloss.

• Wear protective clothing and wash exposed areas with

soap and water. Allowing dust to get into your mouth, eyes, or

lay on the skin may promote absorption of harmfulchemicals.

Direct particles away from face andbody.

• Use the appropriate dust extractor vacuum to remove

the vast majority of static and airborne dust. Failure

Safety Warnings Specific for Wire Brushing

Operations

a ) Be aware that wire bristles are thrown by the brush

even during ordinary operation. Do not overstress the

wires by applying excessive load to the brush. The wire

bristles can easily penetrate light clothing and/orskin.

b ) Guard must be used for wire brushing, do not allow

any interference of the wire wheel or brush with the

guard. Wire wheel or brush may expand in diameter due to

work and centrifugalforces.

c ) Safety goggles or safety glasses with side shields

and a full face shield compliant with ANSI Z87.1 MUST

be worn by the operator and others that are within 50'

(15.2m) of the use of thisproduct.

Safety Warnings Specific for Sanding Operations

a ) Use proper sized sanding disc paper. Follow

manufacturer's recommendations, when selecting

sanding paper. Larger sanding paper extending too far

beyond the sanding pad presents a laceration hazard and may

cause snagging, tearing of the disc orkickback.

Rating

More about this manual

We understand that it’s nice to have a paper manual for your DeWalt DCG418SHDB Angle Grinder. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact DeWalt. They might be able to provide an original manual. Are you looking for the manual of your DeWalt DCG418SHDB Angle Grinder in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

All manuals for DeWalt Angle Grinders
More manuals of Angle Grinders

Frequently Asked Questions about DeWalt DCG418SHDB Angle Grinder

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.

Related products

Manual

DeWalt DCG405B Angle Grinder

Manual

DeWalt DWE4011 Angle Grinder

Manual

DeWalt DCG414T1 Angle Grinder

Manual

DeWalt DCG418SHDX2 Angle Grinder

Manual

DeWalt DWE490 Angle Grinder

Manual

DeWalt DCG416VSB Angle Grinder

Manual

DeWalt DCG460B Angle Grinder

Manual

DeWalt DCG418X1 Angle Grinder

Related categories