Home > Household appliances > Dehumidifiers > Danby Dehumidifiers > Danby DDR040EB2WDB Dehumidifier

Manual Danby DDR040EB2WDB Dehumidifier

Need a manual for your Danby DDR040EB2WDB Dehumidifier? Below you can view and download the PDF manual for free in English. This product currently has 3 frequently asked questions, 0 comments and has 0 votes. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

Important Safety Information

READ AND FOLLOW ALL SAFETY INSTRUCTIONS

SAVE THESE INSTRUCTIONS!

8) Checks to the refrigeration equipment: Where electrical components are being changed, they shall be

ﬁt for the purpose and to the correct speciﬁcation. At all times the manufacturer’s maintenance and service

guidelines shall be followed. If in doubt, consult the manufacturer’s technical department for assistance. The

following checks shall be applied to installations using ﬂammable refrigerants:

• The actual refrigerant charge size is in accordance with the room size within which the refrigerant

containing parts are installed.

• The ventilation machinery and outlets are operating adequately and are not obstructed.

• If an indirect refrigerating circuit is being used, the secondary circuit shall be checked for the

presence of refrigerant.

• Markings on the equipment continues to be visible and legible. Markings and signs that become

illegible must be corrected.

• Refrigeration pipe or components are installed in a position where they are unlikely to be exposed

to any substance which may corrode refrigerant containing components, unless the components are

constructed of materials which are inherently resistant to being corroded or are suitable protected

against being corroded.

9) Checks to electrical devices: Repair and maintenance to electrical components shall include initial

safety checks and component inspection procedures. If a fault exists that could compromise safety, then

no electrical supply shall be connected to the circuit until it is satisfactorily dealt with. If the fault cannot be

corrected immediately but it is necessary to continue operation, an adequate temporary solution shall be

used. This shall be reported to the owner of the equipment so all parties are advised. Initial safety checks

shall include:

• That capacitors are discharged. This shall be done in a safe manner to avoid possibility of sparking.

• That no live electrical components and wiring are exposed while charging, recovering or purging

the system.

• That there is continuity of earth bonding.

7. Repairs to sealed components

1) During repairs to sealed components, all electrical supplies shall be disconnected from the equipment

being worked upon prior to any removal of sealed covers, etc. If it is absolutely necessary to have an

electrical supply to equipment during servicing then a permanently operating form of leak detection shall

be located at the most critical point to warn of a potentially hazardous situation.

2) Particular attention shall be paid to the following to ensure that by working on electrical components, the

casing is not altered in such a way that the level of protection is affected. This shall include:

• Damage to cables, excessive number of connections, terminals not made to original speciﬁcation,

damage to seals, incorrect ﬁtting of glands, etc.

• Ensure the apparatus is mounted securely.

• Ensure that seals or sealing materials have not degraded such that they no longer serve the purpose

of preventing the ingress of ﬂammable atmospheres. Replacement parts shall be in accordance with

the manufacturer’s speciﬁcations.

Note: The use of silicon sealant may inhibit the effectiveness of some types of leak detection equipment.

Intrinsically safe components do not have to be isolated prior to working on them.

Rating

Let us know what you think about the Danby DDR040EB2WDB Dehumidifier by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.

Are you satisfied with the Danby DDR040EB2WDB Dehumidifier?
Yes No

Be the first to rate this product

0 votes

Join the conversation about this product

Here you can share what you think about the Danby DDR040EB2WDB Dehumidifier. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

More about this manual

We understand that it’s nice to have a paper manual for your Danby DDR040EB2WDB Dehumidifier. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Danby. They might be able to provide an original manual. Are you looking for the manual of your Danby DDR040EB2WDB Dehumidifier in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

Brand	Danby
Model	DDR040EB2WDB
Category	Dehumidifiers
File type	PDF
File size	5.26 MB

All manuals for Danby Dehumidifiers
More manuals of Dehumidifiers

Frequently Asked Questions about Danby DDR040EB2WDB Dehumidifier

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.

Can I turn on my dehumidifier immediately after purchase? Verified

No, just like a refrigerator or freezer the device should be standing upright for at least 2 hours, but preferrably 24 hours before turning it on for the first time.

This was helpful (691) Read more

What is the ideal humidity for a living space? Verified

The ideal humidity in a house is between 40-60%. At a higher or lower humidity, fungi, bacteria and viruses are more likely to develop and you can experience personal discomfort.

This was helpful (520) Read more