Manual Cullmann CUlight FR 60C (for Canon) Flash

Manual

54

Power Management

Use ON/OFF Power Switch to power the ash unit on or off.

Turn off if it will not be used for an extended period of time.

Setting as a master ash, it will turn the power off automatically

after a certain period (approx. 90 seconds) of idle use. Pressing

the camera shutter halfway or pressing any ash button will

wake up the ash unit. Setting as a slave ash, it will enter sleep

mode after a certain period (adjustable, 60 minutes by default) of

idle use. Pressing any ash button will wake it up.

Attaching to a Camera

C.Fn

C.Fn

Attaching to a Camera

Attach the Camera Flash.

1

● Slip the camera flash’s

mounting foot into the

camera’s hotshoe all the

way.

Secure the Camera Flash.

2

● Rotate the lock ring on the

mounting foot until it locks

up.

Detach the Camera Flash.

3

● Rotate the lock ring on the

mounting foot until it is

loosened.

Power Management

Use ON/OFF Power Switch to power the flash unit on or off. Turn off

if it will not be used for an extended period of time. Setting as a

master flash, it will turn the power off automatically after a certain

period (approx. 90 seconds) of idle use. Pressing the camera

shutter halfway or pressing any flash button will wake up the flash

unit. Setting as a slave flash, it will enter sleep mode after a certain

period (adjustable, 60 minutes by default) of idle use. Pressing any

flash button will wake it up.

Disabling Auto Power Off function is recommended

when the flash is used off camera. (C.Fn-APO, Page 74)

Slave Auto Power Off Timer is set to 60 minutes by

default. Another option “30 minutes” is available. (C.Fn-

Sv APOT, Page 74)

FEC: Flash Exposure Compensation

With FEC function, this flash can adjust from -3 to +3 in 1/3rd stops.

It is useful in situations where minor adjusting of the TTL system is

needed based on the environment.

Setting FEC:

Set the flash exposure

2 compensation amount.

● Turn the Select Dial to set

the amount.

● “0.3”means 1/3 step,

“0.7”means 2/3 step.

● To cancel the flash

exposure compensation,

set the amount to “+0”.

Press < SET > button again

3 to confirm the setting.

Press Function Button 2

1 < >. The icon < >

and flash exposure

compensation amount will be

highlighted on the LCD

panel.

FEB: Flash Exposure Bracketing

You can take three flash shots while automatically changing the

flash output for each shot from -3 to +3 in 1/3rd stops. The camera

will record three images with different exposures: one exposed

according to camera calculations, one over-exposed and another

under-exposed. Over and under exposure amount is user

adjustable. This function helps get correct exposure especially in

shooting moving objects or when environmental lights are complex.

Flash Mode—E-TTL Autoflash

This flash has three flash modes: E-TTL, Manual (M), and Multi

(Stroboscopic). In E-TTL mode, the camera and the flash will work

together to calculate the correct exposure for the subject and the

background. In this mode, multiple TTL functions are available:

FEC, FEB, FEL, HSS, second curtain sync, modeling flash, control

with the camera’s menu screen.

Press < MODE > Mode Selection Button and three flash modes

will display on the LCD panel one by one with each pressing.

ETTL Mode

Press < MODE > Mode Selection Button to enter E-TTL mode. The

LCD panel will display.

● Press the camera release button halfway to focus. The aperture

and effective flash range will be displayed in the viewfinder.

● When the shutter button is fully pressed, the flash will fire a pre-

flash that the camera will use to calculate exposure and flash

output the instant before the photo is taken.

- 47 -

- 48 -

1

 Attach the Camera Flash.

• Slip the camera ash’s

mounting foot into the

camera’s hotshoe all

the way.

2

 Secure the Camera Flash.

• Rotate the lock ring on

the mounting foot until it

locks up.

3

 Detach the Camera Flash.

• Rotate the lock ring on the

mounting foot until it is

loosened.

C.Fn

 Disabling Auto Power Off function is recommend-

ed when the ash is used off camera. (C.Fn-APO,

Page 81)

C.Fn

 Slave Auto Power Off Timer is set to 60 minutes

by default. Another option “30 minutes” is availa-

ble. (C.Fn- Sv APOT, Page 81)

Rating

More about this manual

We understand that it’s nice to have a paper manual for your Cullmann CUlight FR 60C (for Canon) Flash. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Cullmann. They might be able to provide an original manual. Are you looking for the manual of your Cullmann CUlight FR 60C (for Canon) Flash in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

All manuals for Cullmann Flashes
More manuals of Flashes

Frequently Asked Questions about Cullmann CUlight FR 60C (for Canon) Flash

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.

Related products

Manual

Cullmann CUlight FR 36C (for Canon) Flash

Manual

Cullmann D 4500 Flash

Manual

Cullmann CUlight FR 36N (for Nikon) Flash

Manual

Cullmann CUlight FR 60N (for Nikon) Flash

Manual

Dörr DCF 52 wi Flash

Manual

MINOX FC 35 Flash

Manual

Metz Mecablitz 28 AF-4 M Flash

Manual

Nikon SB-800 Flash

Related categories