Manual Conair CD2115 Hair Styler
Need a manual for your Conair CD2115 Hair Styler? Below you can view and download the PDF manual for free in English. This product currently has 2 frequently asked questions, 0 comments and has 0 votes. If this is not the manual you want, please contact us.
Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.
Manual
Loading…
SET AND PROTECT
COOL AIR LUXE
model CD2115 – all versions
INSTRUCTIONS
AND STYLING
GUIDE
For your safety
and continued
enjoyment of
this product,
always read the
instruction book
carefully before
using.
IMPORTANT SAFETY
INSTRUCTIONS
When using electrical appliances, especially
when children are present, basic safety
precautions should always be taken, including
the following:
READ ALL INSTRUCTIONS
BEFORE USING
KEEP AWAY FROM WATER
DANGER – Any appliance is electrically
live even when the switch is off. To reduce the
risk of death by electric shock:
1. Always unplug appliance immediately
after using.
2. Do not use while bathing or in the shower.
3. Do not place or store appliance where it can
fall or be pulled into a tub or sink.
4. Do not place in, or drop into water or other
liquids.
5. If an appliance falls into water, unplug it
immediately. Do not reach into the water.
WARNING – To reduce the risk of
burns, electrocution, fire, or injury to persons:
1. This appliance should never be left
unattended when plugged in.
2. Do not pull, twist, or wrap line cord
around appliance.
3. This appliance should not be used by, on
or near children or individuals with certain
disabilities.
4. Use this appliance only for its intended use,
as described in this manual. Do not use
attachments not recommended by the
manufacturer.
5. Never operate this appliance if it has a
damaged cord or plug, if it is not working
properly or if it has been dropped, damaged,
or dropped into water. Return the appliance
to an Authorized Service Center for
examination and repair.
6. Keep the cord away from heated surfaces.
7. Never use while sleeping.
8. Never drop or insert any object into any
opening or hose.
9. Do not use outdoors or operate where aerosol
(spray) products are being used or where
oxygen is being administered.
10. Unit is hot when in use. Do not let heated
surface touch eyes or skin.
11. Do not place the heated unit directly on
any surface while it is hot or plugged in.
12. Never block the air openings of the
appliance or place it on a soft surface, such as
a bed or couch, where the air openings may be
blocked. Keep the air openings free of hair, lint
and other debris.
13. Do not use an extension cord with this
appliance.
14. Do not touch hot surfaces of the appliance.
Use handles or knobs.
15. Do not attempt to touch the housing of
your appliance near the plates, as it is hot
when in use.
16. This appliance is not a toy. Keep away
from children.
17. Do not use with a voltage converter.
18. Before plugging in, read the information
about dual voltage contained below.
SAVE THESE
INSTRUCTIONS
OPERATING
INSTRUCTIONS
This styler is intended for household use. Use on
Alternating Current (50/60Hz) only. This unit is
designed to be operated at 120/240V AC.
This appliance has a polarized plug (one blade is
wider than the other). As a safety feature, this
plug will fit in a polarized outlet only one way. If
the plug does not fit fully in the outlet, reverse
the plug. If it still does not fit, contact a qualified
electrician. Do not attempt to defeat this safety
feature.
DUAL VOLTAGE
This straightening iron will automatically
adjust to the proper voltage. Use an adapter
plug with correct configuration prior to use
in outlet.
NOTE: Do not use this styling appliance on
hair extensions.
AUTO-MONITORING FUNCTION
ALCI WITH LED INDICATOR
IF THE LED INDICATOR IS OFF WHEN THE
APPLIANCE IS OPERATING, THIS INDICATES
THAT THE ALCI IS NOT FUNCTIONING PROPERLY.
STOP USING AND RETURN APPLIANCE TO AN
AUTHORIZED SERVICE CENTER.
(F ig. 1)
(F ig. 2 )
(F ig. 3 )
LED indicator
(If the LED is off
when the appliance is
operating, stop using)
Test
Reset
CHECK ALCI SAFETY FEATURE EVERY TIME
YOU USE THE APPLIANCE.
This appliance is equipped with an auto-
monitoring Appliance Leakage Circuit Interrupter
(ALCI), a safety feature that provides protection
under abnormal conditions, such as immersion
in water. To ensure that the ALCI is functioning
properly, perform the following test each time
you use the appliance.
1. Plug in the appliance with the power off and press
the test button on the ALCI. (see diagram above).
2. There will be an audible click, the reset button
will pop out and the LED indicator will be off. The
appliance will not turn on. This indicates the ALCI
is functioning properly.
3. To reset the ALCI, unplug the unit, press the
reset button and plug the unit back into the
outlet. The LED indicator should light up and the
appliance should work normally when switched on.
WARNING – IF THE LED INDICATOR IS OFF AND THE
UNIT TURNS ON, THIS INDICATES THAT THE ALCI
DEVICE IS NOT WORKING PROPERLY. STOP USING
THE APPLIANCE IMMEDIATELY AND RETURN TO AN
AUTHORIZED SERVICE CENTER FOR EVALUATION.
4. If the appliance shuts off and the reset
button pops up during use, this could indicate
a malfunction. Remove the plug from the outlet
and allow the appliance to cool. Press the reset
button and plug it into the outlet. The appliance
should then function normally. If not, send it to
an author
ized service center for evaluation.
5. IF THE UNIT IS IMMERSED IN WATER.
DO NOT ATTEMPT TO RESET AND USE
THE APPLIANCE. IT SHOULD BE SENT
TO AN AUTHORIZED SERVICE CENTER
IMMEDIATELY.
STYLING WITH THE
CERAMIC-COATED, EASY-GLIDE
FLOATING PLATES AND BARREL
Your new styler has a ceramic-coated,
easy-glide surface. This means it’s not only
simpler to clean off styling product residue, etc.,
after each use, but you’ll find that hair glides
easily over the surface as you’re styling.
The ceramic surface also helps smooth down
flyaways. It evenly distributes heat so that the
style you create has a salon-perfect, silky
smooth, shiny finish.
UNIQUE AIRFLOW SYSTEM
This styling iron features a unique cooling
system for the outer barrel. A fan releases cool
air through the vents in the barrel to help set
your style and create long-lasting results.
USING INSTANT HEAT, THE 4
HEAT SETTINGS AND UNIFORM
HEAT RECOVERY SYSTEM
This styling iron features a heater that
maintains constant temperature during use
for precision styling.
The Instant Heat technology has 4 heat settings
plus cool air setting. There is a temperature
range that’s gentle and safe for every type of
hair, from the finest to the most resistant, to help
you create the look you want.
If you have fine hair, a low temperature will
provide the best results. If you have thick, wavy
or hard-to-style hair, keep the heat setting on
high. Always test a small section of hair to
ensure the proper heat setting for your hair.
You can vary the iron’s temperature according
to your particular need!
GET TO KNOW
YOUR STYLER
LED Temperature
Setting Indicator
Ceramic-
Coated Plates
Heat Up to
400°F
ON/OFF
Fan Button
Dual Voltage
Outer Barrel
Keeps Cool
with Airflow
6 ft. Swivel
Power Cord
Spoon Handle
+/- Temperature
Select Button
VARIOUS STYLES
Straight and Smooth
The ceramic-coated floating plates glide
effortlessly for the silky straight looks you love.
Curls and Waves
The ceramic-coated plates pre-heat hair before
wrapping around the vented titanium-plated
barrel for the long-lasting curls you love.
TEMPERATURE SETTING GUIDE
HAIR TYPE TEMP. CONTROL
FRAGILE/FINE HAIR 285ºF
MEDIUM/
320ºF
NORMAL HAIR
WA
VY/CURLY HAIR 355ºF
TEXTURED/THICK HAIR 400ºF
Stays cool with
OUTER BARREL
airflow system on
Conair’s professional salon standards of
engineering provide you with a uniform and
improved heat recovery system that maintains
the iron at constant temperatures. There is a
constant supply of power to ensure that heat is
continuously and quickly delivered for optimal
styling results, unlike other units, which lose
heat during use. This provides consistent styling
power so that every strand of your hair is set
with the same level of heat and comes out the
same way for a perfect finish.
Never leave your styler on and unattended.
However, should you fail to turn the iron off,
it will shut itself off automatically within
60 minutes.
GETTING STARTED
Plug the styler into any standard electrical
outlet. Press and hold the ON/OFF/FAN button
(
) for 1-2 seconds to turn the styler on. The
unit will automatically default to the 320°F heat
setting. The white 320°F and fan LEDs will start
to blink. Both LEDs will become solid and the
fan will start to release cool air once the
temperature has been reached.
Press the +/- button to select your desired
temperature. To style without the fan, press the
ON/OFF/FAN button (
) 2 times quickly to turn
off the fan. The fan LED will turn off. Press the
ON/OFF/FAN button (
) 2 times quickly again to
turn on fan. The fan LED will turn on.
Press and hold the ON/OFF/FAN button (
) for
1-2 seconds to turn the unit off. All LED lights
and fan will turn off. Unplug the unit. Allow the
styler to cool down before storing.
TO STYLE HAIR
Hair should be clean and completely dry before
using the styler. Ensure hair is dry and combed
through.
FOR CURLS AND WAVES
1. Separate a section of hair. The smaller the
section, the more defined the curl. The larger
the section, the looser the curl or wave.
2. Press the spoon handle to
open plates. Take a section
of hair and place it between
the plates, roughly 2 inches
from the roots. (See Fig. 1.)
Release the spoon handle
to hold hair in between
plates.
3. Turn the styler 180° away
from face so that the hair is
wrapped once around the
outside of the styler (Fig. 2).
4. Slowly glide the styler
along the length of hair
from roots to ends in a
downward motion (Fig. 3).
5. Release the hair from the
styler. The cool air channels
set the style.
6. Repeat for each section of hair.
TO SMOOTH AND STRAIGHTEN
1. Start with a hair section that is 1½ inches
wide and no more than ½ inch thick.
2. Press the spoon handle to open iron and place
the hair section between the two hot plates,
close to the scalp. Trap hair between the plates
by closing the handles together.
3. While maintaining the tension, slowly pull
the unit down along the hair section toward
the ends. At the ends, press the spoon handle
to open iron and allow the hair to slide out.
4. Repeat the process on additional sections of
hair until you achieve the hairstyle you desire.
It may be necessary to repeat the process on
certain areas, depending on the texture of
your hair.
Some experience is necessary when learning
to use this flat iron. After using the iron several
times, you will learn the ideal way to straighten
and style your hair.
This message about...
GROUND
FAULT
CIRCUIT
INTERRUPTERS
...can save a life!
IF YOU MUST USE YOUR STYLER IN THE
BATHROOM, INSTALL A GFCI* NOW!
Your local electrician can help you decide
which type is best for you – a portable unit that
plugs into the electrical outlet or a permanent
unit installed by your electrician. The National
Electrical Code now requires GFCIs in the
bathrooms, garages, and outdoor outlets of all
new homes.
WHY DO YOU NEED A GFCI?
Electricity and water don’t mix.
If your styler falls into water while
it’s plugged in, the electric shock
can kill you...even if the switch
is off. A regular fuse or circuit breaker won’t
protect you under these circumstances.
A GFCI offers you far greater protection.
A GFCI can save your life! Compared to
that, the price is small! Don’t wait...install
one now!
* A GFCI is a sensitive device that reacts
immediately to a small electric current leak
by stopping the electricity flow.
FEDERAL COMMUNICATIONS
COMMISSION NOTICE
WARNING: Changes or modifications to this
unit not expressly approved by the party
responsible for compliance could void the
user’s authority to operate the equipment.
This device complies with Part 15 of the FCC
Rules. Operation is subject to the following
two conditions: (1) This device may not cause
harmful interference, and (2) This device must
accept any interference received, including
interference that may cause undesired
operation.
NOTE: This equipment has been tested and
found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the
FCC Rules. These limits are designed to
provide reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses and can
radiate radio frequency energy and, if not
installed and used in accordance with the
instructions, may cause harmful interference
to radio communications. However, there is
no guarantee that interference will not occur
in a particular installation. If this equipment
does cause harmful interference to radio or
television reception, which can be determined
by turning the equipment off and on, the user is
encouraged to try to correct the interference by
one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the
equipment and receiver.
• Connect the equipment into an outlet on a
circuit different from that to which the receiver
is connected.
• Consult the dealer or an experienced radio/TV
technician for help.
SUPPLIER’S DECLARATION
OF CONFORMITY
Brand: InfinitiPRO by Conair
Model No.: CD2115
Description: Cool Air Curler
Responsible Party: Conair LLC,
1 Cummings Point Road,
Stamford, CT 06902 (203) 351-9000
Standards: FCC Part 15 Subpart B,
ANSI C63.4-2014
This device complies with Part 15 of the FCC
Rules. Operation is subject to the following
two conditions:
(1) This device may not cause harmful
interference, and (2) This device must accept
any interference received, including interference
that may cause undesirable operation.
DATE OF ISSUE: 03/04/2022
USER MAINTENANCE
Your styling iron is virtually maintenance free.
No lubrication is needed. Keep all vents and
openings clear of dirt and dust. If cleaning
becomes necessary, disconnect the unit from
the power source, allow to cool and wipe
exterior with a cloth. If any abnormal condition
occurs, unplug the unit, allow it to cool, and
return it for repair to an Authorized Service
Center only. No repairs should be attempted by
the consumer.
CAUTION
NEVER allow the power supply cord to be pulled,
twisted, or severely bent. Never wrap the cord
tightly around the appliance. Damage will occur
at the high flex point of entry into the appliance,
causing it to rupture and short circuit. Inspect
the cord frequently for damage. Stop use
immediately if damage is visible or if unit stops
or operates intermittently.
STORAGE
When not in use, your appliance is easy to store.
Allow appliance to cool, then simply store out of
reach of children in a safe, dry location. Do not
jerk or strain cord at plug connections. Do not
wrap the line cord around the appliance. Allow
the cord to hang or lie loose and straight at the
point of entry into the appliance.
WARNING:
IF YOU THINK
THE POWER IS OFF
WHEN THE SWITCH
IS OFF,
YOU’RE WRONG.
KEEP AWAY FROM WATER
Everyone knows that electricity and water are
a dangerous combination. But did you know
that an electric appliance is still electrically
live even if the switch is off? If the plug is in,
the power is on. So when you are not using
your appliances, keep them unplugged.
ALWAYS UNPLUG
SMALL APPLIANCES
LIMITED ONE-YEAR WARRANTY
(U.S. AND CANADA ONLY)
Conair will repair or replace (at our option) your
unit free of charge for 12 months from the date
of purchase if the appliance is defective in
workmanship or materials.
To obtain service under this warranty, return the
defective product to the service center listed,
together with your purchase receipt. California
residents need only provide proof of purchase
and should call 1-800-3-CONAIR for shipping
instructions. In the absence of a purchase
receipt, the warranty period shall be 12 months
from the date of manufacture.
ANY IMPLIED WARRANTIES, OBLIGATIONS,
OR LIABILITIES, INCLUDING BUT NOT
LIMITED TO THE IMPLIED WARRANTY OF
MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE, SHALL BE LIMITED IN
DURATION TO THE 12-MONTH DURATION OF
THIS WRITTEN, LIMITED WARRANTY. Some
states do not allow limitations on how long an
implied warranty lasts, so the above limitations
may not apply to you.
IN NO EVENT SHALL CONAIR BE LIABLE
FOR ANY SPECIAL, INCIDENTAL, OR
CONSEQUENTIAL DAMAGES FOR BREACH
OF THIS OR ANY OTHER WARRANTY, EXPRESS
OR IMPLIED, WHATSOEVER. Some states do
not allow the exclusion or limitation of special,
incidental, or consequential damages, so the
above limitation may not apply to you.
This warranty gives you specific legal rights,
and you may also have other rights, which vary
from state to state.
BEAUTY TIPS
To achieve the looks you love and
for more great InfinitiPRO by Conair
®
products, visit conair.com
Please register this product at
register.conair.com
For info on any Conair
®
or InfinitiPRO by Conair
®
product, call 1-800-3-CONAIR or visit us
on the web at www.conair.com
Service Center
Conair LLC
Service Department
7475 N. Glen Harbor Blvd.
Glendale, AZ 85307
©2022 Conair LLC
22PA083338
IB-17639
Loading…
Rating
Let us know what you think about the Conair CD2115 Hair Styler by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.More about this manual
We understand that it’s nice to have a paper manual for your Conair CD2115 Hair Styler. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Conair. They might be able to provide an original manual. Are you looking for the manual of your Conair CD2115 Hair Styler in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.
Specifications
| Brand | Conair |
| Model | CD2115 |
| Category | Hair Stylers |
| File type | |
| File size | 28.61 MB |
All manuals for Conair Hair Stylers
More manuals of Hair Stylers
Frequently Asked Questions about Conair CD2115 Hair Styler
Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.
Can I use a hair styler on wet hair? Verified
It's not advisable to use a hair styler on wet hair. To get the best results the hair should be completely dry.
This was helpful (91) Read moreCan I wrap the cord around the device after use? Verified
It's better not to do this, because it can damage the cord. The best thing to do is wrap the cord the way it was when the product was packaged.
This was helpful (22) Read more
Join the conversation about this product
Here you can share what you think about the Conair CD2115 Hair Styler. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.