Home > Kitchenware > Ice Cube Makers > CombiSteel Ice Cube Makers > CombiSteel VDB 26 Ice Cube Maker

Manual CombiSteel VDB 26 Ice Cube Maker

Need a manual for your CombiSteel VDB 26 Ice Cube Maker? Below you can view and download the PDF manual for free in English. This product currently has 0 frequently asked questions, 0 comments and has 0 votes. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

TECHNICAL SPECIFICATION

(tested under the conditions of ambient temperature 15°C and tap water temperature 10°C)

Model

Ice Making Capacity – 24

hours

Climate

Electrical

Class

Power Input

(W)

Dimension

L×D×H(mm)

VDB-26

26Kgs

220

420×528×655

VDB-50

50Kgs

280

496×610×792

The specifications are subject to be changed without notice. Please check the nameplate for sure.

TROUBLE AND SHOOTING

(for reference of users and technicians)

Disconnect Ice Maker from power before carrying out any of these checks.

TROUBLE

CAUSE

REMEDY

The ice marker does

not work

1.The voltage is out of the

limitation.

2.The ambient temperature is

lower than 10º C.

1.Stop the ice maker and restart it until the

voltage is normal.

2.Try again when the ambient temperature

higher than 10ºC

Water shortage

indicator lights on.

1.Water shortage from the water

supply system.

2. Water valve damaged.

3.Tap water pressure too low.

1.Check the water supply.

If it is OK, restart the maker.

2.Check the water valve.

3.Be sure the tap water pressure is higher

than 1 kg/cm

Compressor doesn’t

work

1.Water shortage.

2.Ice full.

1. Check the water supply system (water

valve and water supply tube).

2. Take out some ice.

Compressor works,

but no ice is made.

1.Refrigerant leakage.

2.The refrigerating system is

blocked.

1.Recharge the refrigerant and check the

leakage again.

2.Charging N2to check whether

The system is blocked and replace the

dryer-filter

3.Replace the solenoid valve

4.Check whether the fan is running.

It is difficult for ice

dropping or ice

cannot be dropped.

1. Water temperature or

ambient temperature is too

low.

2. The solenoid valve is

damaged.

1. Check whether the ambient

temperature is too low (Lower than 10 ºC)

or water temperature is too low(lower

than 7 ºC)

2. Replace the solenoid valve.

Trouble indicator

lights on.

The water box does not tilt.

Unplug the power, check the tiling motor

and relative system. 3~5 minutes later

restart the machine.

Rating

Let us know what you think about the CombiSteel VDB 26 Ice Cube Maker by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.

Are you satisfied with the CombiSteel VDB 26 Ice Cube Maker?
Yes No

Be the first to rate this product

0 votes

Join the conversation about this product

Here you can share what you think about the CombiSteel VDB 26 Ice Cube Maker. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

More about this manual

We understand that it’s nice to have a paper manual for your CombiSteel VDB 26 Ice Cube Maker. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact CombiSteel. They might be able to provide an original manual. Are you looking for the manual of your CombiSteel VDB 26 Ice Cube Maker in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.