Manual Coleman Bayside 6 Tent

Need a manual for your Coleman Bayside 6 Tent? Below you can view and download the PDF manual for free in English. This product currently has 7 frequently asked questions, 0 comments and has 0 votes. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.



To Store
1. All poles and stakes must be placed in the storage bag to prevent
damage to the fabric items placed in the carry case.
2. Make sure tent is clean and dry before placing in carry case.
3. Remove rainfly, spread out on floor of tent, then unzip door & vents
before taking tent down for storage.
4. Neatly fold tent to width of pole storage bag, place on tent, roll
tightly, and place in carry case.
5. Store in a clean, dry area.
Electrical Cord Access
1. Unzip access panel in the lower left front
corner of tent and bring in electrical cord.
Use only UL approved cords that are rated
for outdoor usage. (Fig. 18)
Fig. 18
Cooler Access
The smaller zippered opening at the rear of tent is designed for added
ventilation and easy access to your
beverage cooler.
1. To use as a vent, unzip flap to
expose screen.
2. To use as a cooler access, unzip
other flap to make an avenue to
bring beverages into tent. (Fig. 19)
Fig. 19
Door and Window Vents
1. For better ventilation, unzip
flap on door, roll down, and
insert toggle into fabric loop
to secure. (Fig. 16)
2. To open window vents for
more ventilation, unzip, then
roll up and insert toggles
through fabric loops. (Fig. 17)
Fig. 13
Storage Closet in Tent
The storage closet, located at the back of the tent, is intended for
keeping smaller items out of the way and off the floor of the tent.
(Fig. 14)
NOTE: Heavier items may cause damage to fabric shelves or the
tent fabric.
1. To attach the closet cover, insert toggles through fabric loops.
(Fig. 15 & 15A)
Fig. 14
Fig. 15
Fig. 17
Fig. 16
Things You Should Know:
Under certain conditions (cold weather, high humidity, etc.) condensation •
will form on the inside of your tent. Condensation is caused by water
vapor from your breath, perspiration, or any wet clothing inside the
tent. It is NOT LEAKAGE through the tent fabric. It can be minimized by
removing wet clothing from your tent and by providing good ventilation
through the tent.
Tree limbs, tree sap, bird droppings, or moisture steadily dripping off tree •
limbs can cause damage to the tent fabric and its coating resulting in
leaks or loss of flame-resistant properties.
Never store tent, even for a short period of time, without drying it •
thoroughly and brushing off caked dirt. Do not pack stakes or poles
inside your tent. Use a separate storage bag.
Stakes should be removed by pulling on the stake itself. NEVER PULL ON •
Tent poles should not be left telescoped together during storage.•
Do not leave your tent set-up for weeks at a time. Be aware that •
exposure to ultraviolet rays from the sun can seriously damage material
and/or cause it to become discolored.
WARNING: Keep all flame and heat sources away from this tent
This tent meets the flammability requirements of CPAI-84. The
fabric will burn if left in continuous contact with any flame source.
The application of any foreign substance to the tent fabric may
render the flame-resistant properties ineffective.
2009 The Coleman Company, Inc.
, , , are registered trademarks and Bayside
is a trademark of
The Coleman Company, Inc.
4010007243 (20090921)
6. Stretch elastic straps and hook clip on each to the metal loops at
the front, back, and sides of the
tent. (Fig. 12 & 13)
7. Extend out vestibule flaps
and secure with metal stakes
through the loops in the web
straps. (Fig. 13 & 13A)
8. Stretch guylines until taut, then
secure with stakes. (Fig. 13 & 13B)
Fig. 12
To Attach Rainfly (continued)
Download manual in English (PDF, 1.89 MB)
(Consider the environment and only print this manual if it is really necessary)



Let us know what you think about the Coleman Bayside 6 Tent by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.
Are you satisfied with the Coleman Bayside 6 Tent?
Yes No
Be the first to rate this product
0 votes

Join the conversation about this product

Here you can share what you think about the Coleman Bayside 6 Tent. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

More about this manual

We understand that it’s nice to have a paper manual for your Coleman Bayside 6 Tent. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Coleman. They might be able to provide an original manual. Are you looking for the manual of your Coleman Bayside 6 Tent in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.


Brand Coleman
Model Bayside 6
Category Tents
File type PDF
File size 1.89 MB

All manuals for Coleman Tents
More manuals of Tents

Frequently Asked Questions about Coleman Bayside 6 Tent

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.

Can I store my tent when it's wet? Verified

Only for very short periods of time. When a tent is stored while wet for a week or longer, it can get moldy. This is harmful for your tent and possibly your health.

This was helpful (389) Read more

How do I impregnate a tent? Verified

Pitch the tent, clean the cloth and let it dry. Apply the impregnation agent on the cloth with a plant sprayer or other spray. It is also possible to use a paint roller or brush. The cloth needs to be fully saturated with the impregnation agent. Also treat the inside of the tent. Thoroughly clean any windows with a moist cloth. Do not let the impregnation agent dry on it. Let the tent cloth fully dry. Repeat the treatment if needed.

This was helpful (290) Read more

Can I repair a tear or hole in the canvas of my tent myself? Verified

There are special pieces of self-adhesive patches of cloth available for synthetic tent canvases. Stick one of these patches on both sides of the hole or tear. For cotton tent canvases or mixed material tent canvases it's best to use patches that can be ironed on. This will require an iron.

This was helpful (223) Read more

The zipper of my tent won't run smoothly, what can I do? Verified

When a zipper is running smoothly, use a dry PTFE spray or silicone spray. Do not spray onto the cloth and preventively spray to prevent future problems.

This was helpful (161) Read more

There are water drops on the inside of the tent, does this mean it is leaking? Verified

No, this is probably condensation. Make sure the tent is properly ventilated to keep condensation at a minimum.

This was helpful (134) Read more

What tent pegs are best to use for which surfaces? Verified

On grassland or forest surfaces you can use semi circular or plastic pegs. On rocky surfaces you need to use rock pegs. On clay surfaces you can use semi circular, plastic or universal pegs. On gravel surfaces you need semi circular or universal pegs and on sand you need to use wooden pegs.

This was helpful (110) Read more

The impregnation agent leaves white stains or a white haze on the tent cloth, what can I do about this? Verified

If the agent leaves a white haze or white stains on the tent cloth, this means you have applied more impregnation agent on those areas. This is not harmful and the stains often disappear over time. It is not advisable to use less impregnation agent to prevent stains. The cloth needs to be fully saturated with the impregnation agent to give good results.

This was helpful (102) Read more
Manual Coleman Bayside 6 Tent

Related products

Related categories