Manual Clump & Seal CSLB Litter Box

Need a manual for your Clump & Seal CSLB Litter Box? Below you can view and download the PDF manual for free in English. This product currently has 2 frequently asked questions, 0 comments and has 0 votes. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

Loading…

Product Setup (cont.):
8. After attaching, and while
holding the Detachable Motor
to the back of the Litter Tray,
turn the blue Locking Knob
CLOCKWISE to lock the Motor
into place (see Fig. 8).
Operating Instructions:
1. Add litter to the FILL
line in the Litter Tray
(see Fig. 9). Your Self-Cleaning
Litter Box works with most
litter brands, but clumping-
type litter works best with
this system.
Figure 9
2. Locate the Power Adapter
and plug it in to the outlet
on the side of the Detachable
Motor. The outlet is located
underneath the Motor on the
left side when facing the Rake
Assembly, as shown
in Figure 10.
Figure 10
Figure 8
3. Plug the Power Adapter into a standard household wall outlet. The
Control Panel LED lights will blink in sequence while the unit is powering
up and the rst Cleaning Cycle will begin automatically.
NOTE: If the Litter Box does not complete one Cleaning Cycle, or if you hear
the motor running but the Rake does not move, please go back and
review all previous steps.
4. Choose the Cleaning Frequency on the Control Panel by pressing the SELECT
Button. The Litter Box will automatically perform one Cleaning Cycle at the
time chosen. For example, if you select “Every 4 Hours, the Litter Box will
complete a Cleaning Cycle once every 4 hours, as shown in Figure 11.
Figure 11
For Optimal use:
• This product features a Sensor that will detect when your cat enters the box.
If your cat enters within 10 minutes before the next timed Cycle, this Cycle
will be skipped. SCENARIO 1: If the cat enters the box after the forward Cycle
is complete, the Sensor will hold up its returning motion until cat exits the
litter box. SCENARIO 2: If the rake encounters the cat during the returning
Cycle, the motor will stop the rake once situation is encountered.
A blinking light on the Control Panel will show this error occurred.
• The LED lights on the Control Panel will ash in the event of a power failure.
If this occurs, you must manually reset the unit by pressing and holding the
SELECT Button for 3 seconds; the LED lights will ash in sequence and a single
Cleaning Cycle will be performed. If you reset the unit, you must also reselect
a Cleaning Cycle interval; the motor does not have an internal memory and
will default to hourly cleanings unless programmed otherwise.
• You can also reset the unit by unplugging the Power Adapter from the wall
outlet and plugging it back in.
• The LED lights will ash if an abnormally large clump of litter waste is
detected in order to protect the motor; if this occurs, you must manually
remove the clump and perform a manual reset as described above.
Important Features
• Check the Litter Box often during the rst 72 hours to ensure normal
functionality, that the Cleaning Cycles are being performed at the proper
times, and that your cat is adapting to the new box.
• Always keep litter lled to the Litter Fill Line inside the Litter Tray.
• Replace the Waste Receptacle Bag when full. Make sure to check the Waste
Receptacle daily and replace Bag often for optimum results.
• To prevent odors, replace the Odor Filter every 30 days.
• Clean Rake and Tray by following the Cleaning and Care Instructions.
Acclimating Your Cat:
• Fill your new Self Cleaning Litter Box with litter as directed and place it near
your cats old litter box, as close to it as possible. Plug in the new Litter Box
and set the Cleaning Cycle to run at your desired interval, so your cat can get
used to the movement and sounds created by the cycles. This will allow your
cat to get used to the new unit, while maintaining the level of comfort they
may have with their old litter box.
• After a few days of this, switch the positions of the old and new litter boxes.
At this point, DO NOT clean the old litter box anymore; the vast majority of
cats prefer a clean, fresh litter box and will refuse to use one that is dirty.
This will encourage them to try the new box if they haven’t done so already.
• Once you have noticed your cat is comfortable using the new Self Cleaning
Litter Box, you can remove the old litter box.
NOTE: If you know that your cat is shy, do not proceed with the automatic
cleaning cycle immediately; this will allow him or her to get used to the
new unit without being “surprised” by the sounds and movements of
the automatic Cleaning Cycles.
• Check the Litter Box often during the rst 72 hours to ensure normal
functionality, that the Cleaning Cycles are being performed at the proper
times, and that your cat is adapting to the new box.
• Replace the Waste Receptacle Bag when full.
• When replacing Drawstring Receptacle Bag, the Waste Receptacle should
be washed with warm, soapy water and allowed to dry completely before
reinstalling. Always replace with Arm & Hammer® Clump & Seal® branded
waste receptacle liners.
Caution: To protect against electrical shock do not immerse cord, plugs,
or litter box in water or other liquid.
• The Litter Tray, Rake Assembly and Waste Receptacle Lid should be washed
periodically with warm, soapy water. The Detachable Motor can be wiped
clean with a damp sponge or pet-friendly cleaning product, but should not be
submerged in water. ALWAYS UNPLUG UNIT BEFORE PERFORMING ANY TYPE
OF CLEANING.
• Make sure any washed parts are allowed to dry completely before
reassembling unit.
Care & Cleaning:
Caution: Always unplug unit before doing any type of cleaning.
Although this product requires very little maintenance, some occasional cleaning
and removal of waste product is a necessary part of usage:
Troubleshooting:
There are three reasons why the LED lights on the Control Panel may begin
ashing, indicating that there is a problem with the Cleaning Cycle:
Replacement Parts:
Replacement parts are available by calling the Customer Service at
1-888-397-2877 during the hours of 8am EST – 5pm EST, Monday through
Friday (major holidays excluded). Parts available for replacement are:
Odor Filters & Liners: CSLB-FIL-BAG15
To order additional Odor Filters or Disposable Drawstring Receptacle Bags,
visit www.amazon.com or call 1-888-397-2877 and provide your model
number, located inside the detachable motor.
Limited 1-Year Warranty
In the United States and Canada:
If you have any question regarding this warranty or would like to obtain warranty service,
please call 1-866-537-2249 and a convenient service center address will be provided to you.
Sunbeam Products, Inc. doing business as Jarden Consumer Solutions, or if in Canada, Sunbeam
Corporation (Canada) Limited doing business as Jarden Consumer Solutions (collectively “JCS”)
warrants that for a period of one year from the date of purchase, this product will be free from
defects in material and workmanship. JCS, at its option, will repair or replace this product or
any component of the product found to be defective during the warranty period. Replacement
will be made with a new or remanufactured product or component. If the product is no longer
available, replacement may be made with a similar product of equal or greater value. This is
your exclusive warranty.
DO NOT attempt to repair or adjust any electrical or mechanical functions on this product.
Doing so will void this warranty.
This warranty is valid for the original retail purchaser from the date of initial retail purchase
and is not transferable. Keep the original sales receipt. Proof of purchase is required to obtain
warranty performance. JCS dealers, service centers or retail stores selling JCS products do not
have the right to alter, modify or any way change the terms and conditions of this warranty.
This warranty does not cover normal wear of parts or damage resulting from any of the
following: negligent use or misuse of the product, use on improper voltage or current, use
contrary to the operating instructions, disassembly, repair or alteration by anyone other than
JCS or an authorized Sunbeam® service center. Further, the warranty does not cover: Acts of
God, such as re, ood, hurricanes and tornadoes.
What are the limits on Sunbeam’s liability?
JCS shall not be liable for any incidental or consequential damages caused by the breach of
any express, implied or statutory warranty or condition. Except to the extent prohibited by
applicable law, any implied warranty or condition of merchantability or tness for a particular
purpose is limited in duration to the duration of the above warranty. JCS disclaims all other
warranties, conditions or representations, express, implied, statutory or otherwise. JCS shall
not be liable for any damages of any kind resulting from the purchase, use or misuse of, or
inability to use the product including incidental, special, consequential or similar damages
or loss of prots, or for any breach of contract, fundamental or otherwise, or for any claim
brought against purchaser by any other party.
Some provinces, states or jurisdictions do not allow the exclusion or limitation of incidental
or consequential damages or limitations on how long an implied warranty lasts, so the above
limitations or exclusion may not apply to you. This warranty gives you specic legal rights,
and you may also have other rights that vary from province to province, state to state or
jurisdiction to jurisdiction.
In the U.S.A., this warranty is oered by Sunbeam Products, Inc. doing business as Jarden
Consumer Solutions located in Boca Raton, Florida 33431.
In Canada, this warranty is oered by Sunbeam Corporation (Canada) Limited, doing business
as Jarden Consumer Solutions located at 20 B Hereford Street, Brampton, Ontario L6Y 0M1.
PLEASE DO NOT RETURN THIS PRODUCT TO ANY OF
THESE ADDRESSES OR TO THE PLACE OF PURCHASE.
The ARM & HAMMER™ name logo and associated marks are trademarks of Church & Dwight
Co., Inc. These marks are used under license by Sunbeam Products, Inc. doing business as
Jarden Consumer Solutions.
Patent Pending
© 2015 Sunbeam Products, Inc. doing business as Jarden Consumer Solutions. All rights reserved. Distributed
by Sunbeam Products, Inc. doing business as Jarden Consumer Solutions, Boca Raton, Florida 33431.
NOTE: If the Litter Box does not complete one Cleaning Cycle, or if you hear the
motor running but the Rake does not move, please go back and review all
previous steps.
Select
Sleep
Mode
Hourly Every 4
Hours
Every 8
Hours
Problem
Power
Failure
Manually reset the unit by pressing and
holding the SELECT button for 3 seconds,
or you can reset the unit by unplugging the
Power Adapter from the wall outlet and
plugging it back in; the LED lights will ash in
sequence and a single Cleaning Cycle will be
performed. If you reset the unit, you must also
reselect a Cleaning Cycle interval; the motor does
not have an internal memory and will default to
hourly cleanings unless programmed otherwise.
Possible Solutions
Unit loses
power during
cleaning cycle
Problem
Raking
Clear obstruction
Possible Solutions
Rake will not
move
Odor
Control
Replace lter
The waste bin
is emitting
more odors
than normal
Waste clumps
too large to be
raked
This is a safety feature that protects the motor
from burnout. If large clumps are the cause
of the ashing LED lights, you must manually
remove the clump and perform a manual reset
as described above.
Obstruction
Printed in China CSLB_15EM1 PN 185157
GCDS-ARM41967-SL
Download manual in English (PDF, 1.21 MB)
(Consider the environment and only print this manual if it is really necessary)

Loading…

Rating

Let us know what you think about the Clump & Seal CSLB Litter Box by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.
Are you satisfied with the Clump & Seal CSLB Litter Box?
Yes No
Be the first to rate this product
0 votes

Join the conversation about this product

Here you can share what you think about the Clump & Seal CSLB Litter Box. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

More about this manual

We understand that it’s nice to have a paper manual for your Clump & Seal CSLB Litter Box. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Clump & Seal. They might be able to provide an original manual. Are you looking for the manual of your Clump & Seal CSLB Litter Box in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

Brand Clump & Seal
Model CSLB
Category Litter Boxes
File type PDF
File size 1.21 MB

All manuals for Clump & Seal Litter Boxes
More manuals of Litter Boxes

Frequently Asked Questions about Clump & Seal CSLB Litter Box

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.

Why can't pregnant women clean the litter box? Verified

It is possible that the feces of the cat contain a parasite that in the worst case can cause a miscarriage or death of the baby. Wearing gloves does not prevent this.

This was helpful (3) Read more

How often should a litter box be cleaned? Verified

Maintaining a consistent cleaning routine is crucial, involving the removal of soiled litter with feces and urine at least once daily, and conducting a thorough cleaning of the entire tray on a weekly basis.

This was helpful (2) Read more
Manual Clump & Seal CSLB Litter Box

Related products

Related categories