Home > Business equipment > Laminators > Clas Ohlson Laminators > Clas Ohlson L407-B Laminator

Manual Clas Ohlson L407-B Laminator

Need a manual for your Clas Ohlson L407-B Laminator? Below you can view and download the PDF manual for free in English. This product currently has 0 frequently asked questions, 0 comments and has 0 votes. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

English

3-5 mm

3. Lift up one corner of thelamination

ﬁlm and place thepaper to be

laminated between thetwo sheets

of ﬁlm. Leave at least 3–5 mm of

space at theedges when positioning

thepaper. Make sure thepaper is not

crooked.

4. Feed thesealed end of thelamination ﬁlm pocket into theﬁlm feed slot ﬁrst.

This is very important; otherwise, thelamination ﬁlm can become caught

in therollers.

5. Let theentire lamination exit freely. Do not pull it out with force. Let it cool before

handling it. Place aﬂat heavy object like abook onto thelaminate while it is cooling

if you want it to ensure that it will be ﬂat and smooth.

6. When ﬁnished, set thepower switch to the0 position and unplug themachine.

Cold laminating

• If themachine has been used for hot laminating it must be left to cool for at least

two hours before it can be used for cold laminating.

• Only use laminating ﬁlm designed for Cold Laminating.

1. Plug thelaminator in to awall socket and set thepower switch to COLD.

The laminator is ready for use as soon as thered indicator light shines.

2. If thelaminating ﬁlm is covered in protective foil, remove it.

3. Follow steps 3–6 above in theHot laminating section.

• Select thecorrect size of lamination ﬁlm so that it ﬁts theobject to be laminated.

• Avoid placing multiple pieces of paper into asingle lamination pouch.

• Make sure that thetotal thickness of thelaminate must not exceed 0.5mm.

• Do not feed in empty lamination ﬁlm.

• Do not cut thelamination ﬁlm into smaller pieces before feeding it through themachine.

• Do not feed theﬁlm into themachine at anangle. Doing so may cause it to become

caught in themachine during thelamination process.

Instructions for use

Hot laminating

1. Plug thelaminator into awall socket and set thelaminate thickness selector to

thecorrect setting (80–125 microns) for thelaminating ﬁlm you will be using.

The red indicator light will illuminate while themachine warms up.

2. After about 5–7 minutes, when thegreen indicator light shines steadily (it starts

to ﬂash while thelaminator is heating up), themachine has warmed up and is

ready for use. Make sure that there is sufﬁcient room behind themachine to allow

thelamination to exit themachine freely.

Rating

Let us know what you think about the Clas Ohlson L407-B Laminator by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.

Are you satisfied with the Clas Ohlson L407-B Laminator?
Yes No

Be the first to rate this product

0 votes

Join the conversation about this product

Here you can share what you think about the Clas Ohlson L407-B Laminator. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

More about this manual

We understand that it’s nice to have a paper manual for your Clas Ohlson L407-B Laminator. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Clas Ohlson. They might be able to provide an original manual. Are you looking for the manual of your Clas Ohlson L407-B Laminator in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.