Manual Clas Ohlson KT-3268 Alarm Clock Radio

Need a manual for your Clas Ohlson KT-3268 Alarm Clock Radio? Below you can view and download the PDF manual for free in English. This product currently has 3 frequently asked questions, 0 comments and has 3 votes with an average product rating of 0/100. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

Loading…

English
GREAT BRITAIN • customer service
tel: 0845 300 9799 e-mail: [email protected] internet: www.clasohlson.com/uk
Ver. 20140609
Setting thetime
Note: You have no more than about a3-second interval
between setting thehours and minutes. Theclock radio will
revert back to its original setting if you wait more than 3 seconds
between these two stages.
1. Hold in [ TIME SET ] for 2 seconds until the “24 H” symbol
shows in thedisplay.
2. Press [ MEMORY/TIME SET ] to confirm your selections.
Theclock display should then begin flashing.
3. Press or hold in [ TUNING-/HOUR ] to set thehours.
4. Press or hold in [ TUNING+/MINUTE ] to set theminutes.
5. Settings are automatically registered after 3 seconds.
Alternatively you may press [ MEMORY/TIME SET ] to
confirm your settings.
Setting thealarm
Two separate alarms are available, alarm 1 (AL1) and
alarm 2 (AL2).
Select either radio or “buzzer”.
1. Press [
/FUNCTION ] until theclock display appears.
2. Make sure that theclock is set to thecorrect time.
3. Hold in [ VOL-/AL1 ] or [ VOL+/AL2 ] (depending on whether you
are setting alarm 1 or 2) for 2 seconds until “0:00” appears.
4. Press or hold in [ TUNING-/HOUR ] to set thehours.
5. Press or hold in [ TUNING+/MINUTE ] to set theminutes.
6. Press [ VOL-/AL1 ] or [ VOL+/AL2 ] again to select thetype of
alarm, radio or “buzzer”. Your selection will be indicated
(9, 10, 12 and 13) on thedisplay.
7. Press [ MEMORY/TIME SET ] to confirm your selections.
Deactivating thealarm/s
1. Hold in [ VOL-/AL1 ] or [ VOL+/AL2 ] until theset alarm time
begins flashing.
2. Short press [ VOL-/AL1 ] or [ VOL+/AL2 ] twice so that both
alarm indicators disappear.
3. Settings are automatically registered after 3 seconds.
Alternatively you may press [ MEMORY/TIME SET ] to
deactivate thealarm.
Snooze
When thealarm sounds, press [ SNOOZE/DIMMER/SLEEP ]
to activate thesnooze function. Thealarm will sound again
after 9 minutes.
Sleep timer
1. Press [ /FUNCTION ] to turn theradio on.
2. Hold in [ SNOOZE/DIMMER/SLEEP ] until “90” appears.
3. Short press [
/FUNCTION ] again to select thedesired
sleep timer setting (90, 80, 70, 60, 50, 40, 30, 20 and
10 minutes).
4. To deactivate thesleep timer, repeat steps 1 and 2 as
described above until thedisplay shows “OFF”.
Display backlight
Short press [ SNOOZE/DIMMER/SLEEP ] at any time to adjust
thebacklight.
FM radio
Note: Try moving theaerial to another position whenever
you experience bad FM reception. You may also try moving
theradio to another location to address this problem.
1. Make sure that theFM aerial is fully extended.
2. Press [
/FUNCTION ] to turn theradio on.
3. Hold in [ TUNING-/HOUR ] or [ TUNING+/MINUTE ] until
thestation scan begins or short press [ TUNING-/HOUR ]
and/or [ TUNING+/MINUTE ] to search for stations manually.
4. Adjust thevolume level using, [ VOL-/AL1 ] or [ VOL+/AL2 ].
Saving station presets
20 station presets are available.
1. Select thedesired radio station.
2. Hold in [ MEMORY/TIME SET ] until anavailable preset slot
begins flashing.
3. Press [ TUNING-/HOUR ] or [ TUNING+/MINUTE ] for
selecting aspecific preset (1–20).
4. Press [ MEMORY/TIME SET ] to save thestation.
5. You may also save thestation onto anexisting occupied
preset by saving over it.
Selecting existing presets
1. Press [ /FUNCTION ] to turn theradio on.
2. Press [ MEMORY/TIME SET ] repeatedly until thedesired
preset appears.
Care and maintenance
Unplug theclock radio before cleaning it with adamp cloth.
Use only mild cleaning agents for cleaning, never solvents
or corrosive chemicals.
Unplug themains lead during thunderstorms or if theclock
radio is not to be used for any extended period.
Disposal
This product should be disposed of in accordance with local
regulations. If you are unsure how to proceed, contact your
local council.
Specifications
Rated voltage 230 V, 50 Hz
Batteries 2×AA/LR6
Frequency range FM 87.5–108.0MHz
Size 12 x 11 x 4.5 cm
Download manual in English (PDF, 0.35 MB)
(Consider the environment and only print this manual if it is really necessary)

Loading…

Rating

Let us know what you think about the Clas Ohlson KT-3268 Alarm Clock Radio by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.
Are you satisfied with the Clas Ohlson KT-3268 Alarm Clock Radio?
Yes No
0%
100%
3 votes

Join the conversation about this product

Here you can share what you think about the Clas Ohlson KT-3268 Alarm Clock Radio. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

More about this manual

We understand that it’s nice to have a paper manual for your Clas Ohlson KT-3268 Alarm Clock Radio. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Clas Ohlson. They might be able to provide an original manual. Are you looking for the manual of your Clas Ohlson KT-3268 Alarm Clock Radio in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

Brand Clas Ohlson
Model KT-3268
Category Alarm Clock Radios
File type PDF
File size 0.35 MB

All manuals for Clas Ohlson Alarm Clock Radios
More manuals of Alarm Clock Radios

Frequently Asked Questions about Clas Ohlson KT-3268 Alarm Clock Radio

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.

What do AM and PM stand for? Verified

AM stands for Ante Meridiem and indicates that the time is before midday. PM stands for Post Meridiem and indicates that the time is past midday.

This was helpful (230) Read more

What is GMT? Verified

GMT stands for Greenwich Mean Time (sometimes called UTC, standing for Coordinated Universal Time). It is the time for the longitude 0, that passes through Greenwich near London.

This was helpful (136) Read more

What is the difference between FM and AM? Verified

FM and AM are both forms of modulation used to transmit a signal. FM stands for Frequency Modulation and AM stands for Amplitude Modulation. AM is the oldest form of modulation. The biggest difference is that the FM signal is much stronger than the AM signal.

This was helpful (135) Read more
Manual Clas Ohlson KT-3268 Alarm Clock Radio

Related products

Related categories