Home > Do-It-Yourself > Welders > Clarke Welders > Clarke WH 215 Welder

Manual Clarke WH 215 Welder

Need a manual for your Clarke WH 215 Welder? Below you can view and download the PDF manual for free in English. This product currently has 1 frequently asked question, 0 comments and has 0 votes. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or [email protected]

• other equipment in the environment. The user shall ensure that other

equipment being used in the environment is compatible. This may require

additional protection measures;

It may be possible to avoid the above by changing the time of day that

welding or other activities are to be carried out.

The size of the surrounding area to be considered will depend on the structure

of the building and other activities that are taking place. The surrounding area

may extend beyond the boundaries of the premises.

METHODS OF REDUCING EMISSIONS

MAINS SUPPLY

Welding equipment should be connected to the mains supply according to

the manufacturers recommendations. If interference occurs, it may be

necessary to take additional precautions such as filtering of the mains supply.

Consideration should be given to shielding the supply cable of permanently

installed welding equipment, in metallic conduit or equivalent. Shielding

should be electrically continuous throughout its length. The shielding should be

connected to the welding power source so that good electrical contact is

maintained between the conduit and the welding power source enclosure.

MAINTENANCE OF THE WELDING EQUIPMENT

The welding equipment should be routinely maintained according to the

manufacturers recommendations. All access and service doors and covers

should be closed and properly fastened when the welding equipment is in

operation. The welding equipment should not be modified in any way except

for those changes and adjustments covered in the manufacturers instructions.

In particular, the spark gaps of arc striking and stabilizing devices should be

adjusted and maintained according to the manufacturers recommendations.

WELDING CABLES

The welding cables should be kept as short as possible and should be

positioned close together, running at or close to the floor level.

EQUIPOTENTIAL BONDING

Bonding of all metallic components in the welding installation and adjacent to

it should be considered. However, metallic components bonded to the work

piece will increase the risk that the operator could receive a shock by

touching these metallic components and the electrodes at the same time.

The operator should be insulated from all such bonded metallic components.

EARTHING OF THE WORKPIECE

Where the workpiece is not bonded to earth for electrical safety, nor

connected to earth because of its size and position, e.g. a ships hull or building

steelwork, a connection bonding the workpiece to earth may reduce

emissions in some, but not all instances.

Rating

Let us know what you think about the Clarke WH 215 Welder by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.

Are you satisfied with the Clarke WH 215 Welder?
Yes No

Be the first to rate this product

0 votes

Join the conversation about this product

Here you can share what you think about the Clarke WH 215 Welder. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

More about this manual

We understand that it’s nice to have a paper manual for your Clarke WH 215 Welder. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Clarke. They might be able to provide an original manual. Are you looking for the manual of your Clarke WH 215 Welder in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

Brand	Clarke
Model	WH 215
Category	Welders
File type	PDF
File size	5.19 MB

All manuals for Clarke Welders
More manuals of Welders

Frequently Asked Questions about Clarke WH 215 Welder

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.

Can I store power tools in a shed or garage? Verified

In general, you can store power tools in a shed or garage, even if it sometimes freezes there. However, it is better for the lifespan of the power tool to store it in a dry place without major temperature fluctuations. In a shed or garage, differences in temperature can cause condensation to form, which can cause rust. In addition, tools that run on batteries last shorter and do not charge as well at very low temperatures. To be sure how your power tool needs to be stored, always thoroughly read the user manual.

This was helpful (19) Read more