Home > Do-It-Yourself > Welders > Clarke Welders > Clarke WH 215 Welder

Manual Clarke WH 215 Welder

Need a manual for your Clarke WH 215 Welder? Below you can view and download the PDF manual for free in English. This product currently has 1 frequently asked question, 0 comments and has 0 votes. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or [email protected]

Examples of conducting objects include, but are not limited to, buildings,

electrical tools, work benches, welding power source cases, workpieces, etc.

Never touch the electrode and any metal object unless the welding power

source is off. When installing, connect the frames of each unit such as the

welding power source, control, work table and water circulator to the building

earth. Conductors must be adequate to carry earth currents safely.

Equipment made electrically LIVE by stray current may shock, possibly fatally.

Do not EARTH to electrical conduit, or to a pipe carrying ANY gas or a

flammable liquid such as oil or fuel.

2) TORCH

A fully insulated torch should be used without protruding screws or other

damage.

3) CONNECTORS

Fully insulated lock-type connectors should be used to join welding cable.

4) CABLES

Frequently inspect cables for wear, cracks and damage. IMMEDIATELY

REPLACE those with excessively worn or damaged insulation to avoid possibly

lethal shock from bare cable. Cables with damaged areas may be taped to

give resistance equivalent to original cable. Keep the cable dry, free of oil

and grease and protected from hot metal and sparks.

5) TERMINALS AND OTHER EXPOSED PARTS

Terminals and other exposed parts of electrical units should have insulating

covers secured before operation.

6) ELECTRODE

a) Equipment with output on/off control (contactor)

Welding power sources for use with the gas metal arc welding, gas tungsten

arc welding and similar processes normally are equipped with devices hat

permit on/off control of the welding power output. When so equipped the

electrode wire becomes electrically LIVE when the power source switch is ON

and welding gun switch is closed. Never touch the electrode wire or any

conducting object in contact with the electrode circuit unless the welding

power source is off.

b) Equipment without output on/off control (no contactor)

Welding power sources used with shielded metal arc welding and similar

processes may not be equipped with welding power output on/off control

devices. With such equipment the electrode is electrically LIVE when the

power switch is turned ON. Never touch the electrode unless the welding

power source is off.

Rating

Let us know what you think about the Clarke WH 215 Welder by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.

Are you satisfied with the Clarke WH 215 Welder?
Yes No

Be the first to rate this product

0 votes

Join the conversation about this product

Here you can share what you think about the Clarke WH 215 Welder. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

More about this manual

We understand that it’s nice to have a paper manual for your Clarke WH 215 Welder. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Clarke. They might be able to provide an original manual. Are you looking for the manual of your Clarke WH 215 Welder in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

Brand	Clarke
Model	WH 215
Category	Welders
File type	PDF
File size	5.19 MB

All manuals for Clarke Welders
More manuals of Welders

Frequently Asked Questions about Clarke WH 215 Welder

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.

Can I store power tools in a shed or garage? Verified

In general, you can store power tools in a shed or garage, even if it sometimes freezes there. However, it is better for the lifespan of the power tool to store it in a dry place without major temperature fluctuations. In a shed or garage, differences in temperature can cause condensation to form, which can cause rust. In addition, tools that run on batteries last shorter and do not charge as well at very low temperatures. To be sure how your power tool needs to be stored, always thoroughly read the user manual.

This was helpful (19) Read more