O
6
PREPARATION FOR USE
NOTE: All numbered items throughout this manual refer to the parts list item number
on Pages 12 - 15
1. Remove the plastic travel plug from the oil filler hole,
on the top of the crank case, and insert the dipstick
(see Fig. 7 - page 9).
2. Check the oil level is at the correct level on the
dipstick, as shown in Fig.1. Where necessary, top up
with Clarke Compressor Oil (Available from
your local Clarke dealer).
OPERATION (Ref. Fig. 2)
NOTE: If you intend using your compressor for spraying, read also the ‘Helpful
Hints on Spraying” booklet - supplied with the machine.
1. Check that the mains voltage corresponds with that shown on the data sticker
on the crankcase cover of the machine.
2. Ensure that the ON/OFF switch is in the ‘OFF’ (0) position, i.e. pushed DOWN,
then plug in and switch on at the mains supply.
3. To start the compressor pull UP the ON/OFF switch to the ‘ON’ (I) position
- the motor should start immediately.
Fig.1
Fig. 2
Illustration is of
Warrior 30.
Component
layout for the
Warrior 60. is
the same,
although some
components
differ slightly in
appearance
Also available without the spray Gun Kit 600 - Part No. 3110150
- or items sold separately
Should you experience any difficulties obtaining accessories, please contact
Clarke International sales department by telephoning 01992 565300 for details of
your nearest dealer.
Please note that the details and specifications contained herein, are correct at the time of going to
print. However, CLARKE INTERNATIONAL reserve the right to change specifications at any time without
prior notice. Always consult the machines Data Plate
11
ACCESSORIES
Your Warrior Air Compressor can be used in conjunction with a range of optional
accessories for inflating tyres, air brushing, stapling, blowing and many other uses.
For details contact your local Clarke dealer.
Air kits are available which are ideal for almost all applications (see below).
Kit illustrated is KIT 1000 - Part No. 3110155
SPECIFICATIONS
Rotational Speed .................................................. 2850 rpm
Max. Pressure Warrior 30 & 60 ........................... 10 bar
Warrior 30 110V .......................... 10 bar
Air Displacement .................................................. 8.7 cu ft/min (247L/min)
Electric Motor ........................................................ 2 hp (1.5kW)
Receiver Warrior 30 .................................... 24 LTR
Warrior 60 .................................... 50 LTR
Fuse Rating ..... Warrior 30 & 60 ........................... 13amps
Warrior 30 110V .......................... 20Amps
Duty Cycle ............................................................ S1 at max. 7 bar
(i.e. Compressor may run continuously at 7 bar max.)
Join the conversation about this product
Here you can share what you think about the Clarke Warrior 60 Compressor. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.