Home > Do-It-Yourself > Compressors > Clarke Compressors > Clarke Warrior 40 Compressor

Manual Clarke Warrior 40 Compressor

Need a manual for your Clarke Warrior 40 Compressor? Below you can view and download the PDF manual for free in English. This product currently has 0 frequently asked questions, 0 comments and has 0 votes. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

OPERATION

If the compressor has not been used for 24 hours or more, open the drain valve

in the tank to drain any condensate which may have accumulated. See

page 10

1. Insert the plug into the power so

cket and switch on the power.

Lift the On/Off button.

• The compressor will run until the

main tank is fully pressurised. It

will then switch off.

• The compressor will start up

again when the pressure in the

main tank decreases during

use.

3. Make sure the safety valve is

working correctly by pulling on the

ring attached

• Air should be released when the

ring is

pulled and stop when

released.

• If the valve does not operate as

expected, it must be replaced

by qualified service personnel

before the compressor is used.

Set the operating pressure you

need using the pressure regulator.

• Clockwise to increase the

pressure

• Anticlockwise to decrease the

pressure

WARNING: DO NOT REMOVE OR ATTEMPT TO ADJUST THE SAFETY VALVE.

Rating

Let us know what you think about the Clarke Warrior 40 Compressor by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.

Are you satisfied with the Clarke Warrior 40 Compressor?
Yes No

Be the first to rate this product

0 votes

Join the conversation about this product

Here you can share what you think about the Clarke Warrior 40 Compressor. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

More about this manual

We understand that it’s nice to have a paper manual for your Clarke Warrior 40 Compressor. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Clarke. They might be able to provide an original manual. Are you looking for the manual of your Clarke Warrior 40 Compressor in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.