Thank you for purchasing this CLARKE Water Pump, which is a general purpose
pump, suitable for a variety of applications involving the transfer of clean, cold
water ONLY.
The CPE10S differs from other models in that it is a self priming pump, and is
commonly referred to as a Jet Pump..
To help ensure long, trouble free performance and the protection afforded by
the Warranty, please follow carefully all the instructions and recommendations
given in this booklet.
GUARANTEE
This CLARKE product is guaranteed against faulty manufacture for a period of 12
months from the date of purchase. Please keep your receipt as proof of purchase.
This guarantee is invalid if the product is found to have been abused or tampered
with in any way, or not used for the purpose for which it was intended.
Faulty goods should be returned to their place of purchase. No product can be
returned to us without prior permission. This guarantee does not effect your
statutory rights.
SAFETY PRECAUTIONS
1. Ensure the pump is installed in a horizontal position with the outlet facing
vertically upwards, and that it is firmly anchored via its fixing screws.
2. Ensure there is an adequate air flow around the pump. DO NOT mount it in
an enclosed atmosphere.
3. Ensure all water pipes - supply or discharge, are adequately supported where
necessary, so as not to put a strain on the pump connections.
4. DO NOT allow the pump to run dry, as this will cause serious damage to the
pump seals.
5. Ensure the inlet to the pump is completely unrestricted.
6. Ensure the pump is protected from the elements, neither the motor nor the
electrical terminal box is intended to be waterproof.
7. Ensure that all pipes are protected against damage where necessary, and
that they are suitably lagged to avoid the possibility of freezing during cold
weather.
2
SPECIFICATIONS
TAM105 TAM110 TAM120 CPE10S
Motor 230V 50Hz 1ph 230V 50Hz 1ph 230V 50Hz 1ph 230V 50Hz 1ph
Power 330Watts 750Watts 1500Watts 950Watts
Current 1.4Amps 2.5Amps 6.2Amps 4Amps
Capacitor 8uF 450V 16uF 450V 33uF 20uF 450V
Speed 2800rpm 2850rpm 2800rpm 2850rpm
Max. Head 35M 60M 65M 55M
Max. Lift (Suction) 7M 7M 7M 7M
Bore Size 1”BSP 1.5”BSP 1.5”BSP 1”BSP
Max. Output 40L/min 59L/min 75L/min 45L/min
Weight 7.2kg 11kg 24kg 17.5kg
Part No. 7230350 7230360 7230370 7120300
Please note that as the pumping head is increased, so the flow rate of
water will decrease.
ACCESSORIES
1” 1.5”
Foot Valve Filter 7950561 7950565
BSP Spigot Hose Connector 7950210 7950215
I.D. Reinforced Hose for suction and delivery. 7955010 7955015
I.D. Layflat Hose for delivery only. 7955110 7955115
The details and specifications contained herein, are correct at the time of going to print. However, CLARKE International reserve
the right to change specifications at any time without prior notice.
7
PARTS & SERVICE TEL: 020 8988 7400
PARTS & SERVICE FAX: 020 8558 3622
or e-mail as follows:
For Spare Parts and Service, please contact your nearest dealer,
or CLARKE International, on one of the following numbers.
SPARE PARTS AND SERVICE CONTACTS
Join the conversation about this product
Here you can share what you think about the Clarke TAM 120 Water Pump. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.