Manual Clarke TAM 101 Water Pump

Need a manual for your Clarke TAM 101 Water Pump? Below you can view and download the PDF manual for free in English. This product currently has 0 frequently asked questions, 0 comments and has 0 votes. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

Loading…

ELECTRICAL CONNECTIONS
WARNING: THIS MACHINE MUST BE EARTHED.
Installation should be carried out by a qualified electrician in accordance with
I.E.E. Regulations. However, in the further interests of safety we would emphasize
the following :-
This pump should be connected to a standard domestic 13 amp, 230 volt (50Hz),
electrical supply and we strongly recommend that the connection be made via
a Residual Current Device (RCD).
IMPORTANT: Should the supply be taken from a normal 13 amp socket, then the
plug used must be to BS 1363 standard, and the wires should be wired up in
accordance with the following colour code:
Green & Yellow .......... Earth or marked with a letter “E” or Earth symbol “ ”.
Blue ............................. Neutral or terminal marked with a letter “N”
Brown .......................... Live or terminal marked with a letter “L”
FUSE RATING
The fuse in the plug must be rated at 5 amps
3
The pump MUST be wired according to the diagram below, and ensuring the
following precautions are strictly observed:
1. The cable used must be of sufficient size
to ensure it is a tight fit in the cable gland.
2. Ensure the cable gland is correctly used.
The clamp must firmly clamp the outer
cable sheath and NOT the conductors.
3. Ensure the earth conductor is correctly
connected to the earth terminal.
The bare conductor should be wrapped
around the body of the screw, positioned
between the two washers, and the screw
suitably tightened.
WARNING:
DO NOT attempt electrical installation work if you are in any doubt as to how it
should be properly carried out. Consult a qualified electrician.
ACCESSORIES
1” Foot Valve Filter 7950561
1” BSP Spigot Hose Connector 7950210
1” I.D. Reinforced Hose for suction and delivery. 7955010
1” I.D. Layflat Hose for delivery only. 7955110
PARTS & SERVICE
When disposing of this product, do not dispose of with general waste. It must be disposed of according to the laws
governing Waste Electrical and Electronic equipment, at a recognised disposal facility.
SPECIFICATIONS
TAM101 CEB102
Motor 230V 50Hz 1ph 230V 50Hz 1ph
Power 0.5HP (370W) 0.5HP (370W)
Speed 2850 RPM 2850 RPM
Max. Head 35M 35M
Max. Lift (Suction) 8M 8M
Bore Size 1”BSP 1”BSP
Max. Output 35 litres/min 35 litres/min
Weight 5.8kg 6.25kg
Part Number 7320375 7230325
Please note that the details and specifications contained herein, are correct at the time of going to
print. However, CLARKE International reserve the right to change specifications at any time without prior
notice. Always consult the pump’s data plate
Please contact your nearest dealer, or
CLARKE International, on one of the following numbers.
PARTS & SERVICE TEL: 020 8988 7400
PARTS & SERVICE FAX: 020 8558 3622
or e-mail as follows:
PARTS & SERVICE
6
Download manual in English (PDF, 1.89 MB)
(Consider the environment and only print this manual if it is really necessary)

Loading…

Rating

Let us know what you think about the Clarke TAM 101 Water Pump by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.
Are you satisfied with the Clarke TAM 101 Water Pump?
Yes No
Be the first to rate this product
0 votes

Join the conversation about this product

Here you can share what you think about the Clarke TAM 101 Water Pump. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

More about this manual

We understand that it’s nice to have a paper manual for your Clarke TAM 101 Water Pump. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Clarke. They might be able to provide an original manual. Are you looking for the manual of your Clarke TAM 101 Water Pump in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

Brand Clarke
Model TAM 101
Category Water Pumps
File type PDF
File size 1.89 MB

All manuals for Clarke Water Pumps
More manuals of Water Pumps

Manual Clarke TAM 101 Water Pump

Related products

Related categories