SAFETY PRECAUTIONS
WARNING
As with all machinery, there are certain hazards involved with their
operation and use. Exercising respect and caution will considerably
lessen the risk of personal injury. However, if normal safety precautions
are overlooked, or ignored, personal injury to the operator, or damage
to property may result.
It is in your own interest to read and pay attention
to the following rules:
1. COMPRESSED AIR IS DANGEROUS, NEVER direct a jet of air at people
or animals, and NEVER discharge compressed air against the skin.
2. DO NOT operate your compressor with any guards removed.
3. Electrical or mechanical repairs should only be carried out by a
qualified engineer. If problems occur, contact your Clarke dealer.
4. Before carrying out any maintenance, ensure the pressure is expelled
from the air receiver, and the machine is disconnected from the mains.
5. DO NOT leave pressure in the receiver overnight, or when transporting.
6. DO NOT adjust, or tamper with the safety valves. The maximum pressure
is factory set, and clearly marked on the machine.
7. DO NOT operate in wet or damp conditions. Keep the machine dry at
all times.
8. A clean atmosphere will ensure efficient operation. Do not use in dusty
or otherwise dirty locations.
9. Some of the metal parts can become quite hot during operation.
Take care not to touch these until the machine has cooled down.
10. Always adjust the pressure regulator to the recommended setting for
the particular spray gun or tool being used.
11. When spraying inflammable materials e.g. cellulose paint, ensure there
is adequate ventilation and keep clear of any possible source of
ignition.
12. Protect yourself. Think carefully about any potential hazards which
may be created by using the air compressor and use the appropriate
protection. e.g. Goggles will protect your eyes from flying particles.
Face masks will protect you against paint spray and/or fumes.
13. Before spraying any material always consult paint manufacturers
instructions for safety and usage.
4
SPECIFICATIONS
Electrical Supply................................................. 230 V, 1 Phase 50Hz
Motor Rating....................................................... 1.5 HP
Max. Air Pressure ................................................ 8 bar (115 lbf/in
2
)
Air Displacement ............................................... 6.3 cuft/min
Air Receiver ....... Ranger 40 ............................. 24 litre
Ranger 65 ............................. 50 litre
Nett Weight........ Ranger 40 ............................. 18kg
Ranger 65 ............................. 30kg
Dimensions......... Ranger 40 ............................. 600x260x600mm
Ranger 65 ............................. 820x320x620mm
Duty Cycle .......................................................... S3 40% at 7bar**
Part No. .............. Ranger 40 ............................. 2320503
Ranger 65 ............................. 2320521
*
*The machine may not be run for more than 4 minutes in any 10 minute period at 7bar
Please note that the details and specifications contained herein, are correct at the time of going to
print. However, CLARKE International reserve the right to change specifications at any time without
prior notice. Always consult the machine’s data plate
13
Your Clarke Ranger Oil Free Air Compressor can be used in conjunction with a range of
optional accessories for inflating tyres, air brushing, stapling, blowing and many other uses.
For details contact your local accessory stockist. A complete kit is available from your Clarke
dealer which is ideal for almost all applications.
Please quote part number 3110165
Should you experience any difficulties obtaining accessories, please contact the Clarke
sales department (telephone 01992 565300) for details of your nearest dealer.
ACCESSORIES
Join the conversation about this product
Here you can share what you think about the Clarke Ranger 40 Compressor. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.