Home > Do-It-Yourself > Welders > Clarke Welders > Clarke MIG 220TE Welder

Manual Clarke MIG 220TE Welder

Need a manual for your Clarke MIG 220TE Welder? Below you can view and download the PDF manual for free in English. This product currently has 1 frequently asked question, 0 comments and has 0 votes. If this is not the manual you want, please contact us.

Is your product defective and the manual offers no solution? Go to a Repair Café for free repair services.

Manual

Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com

ELECTRICAL CONNECTIONS

MIG 220TE & 255TEC

Connect the mains lead, through a suitably fused isolator switch, to a 230 Volt

(50Hz) electrical supply, having a fuse rating in accordance with that given in

the specification chart on page 2. A standard 13 Amp plug MUST NOT be used

with this machine.

IMPORTANT: The wires in the mains lead are coloured in accordance with the

following code: Green & Yellow - Earth, Blue - Neutral, Brown - Live

As the colours of the flexible lead of this appliance may not correspond with

the coloured markings identifying terminals in your electrical supply, proceed

as follows:

• Connect the GREEN & YELLOW coloured cord to terminal marked with a

letter “E” or Earth symbol “ ”

• Connect BROWN cord to terminal marked with a letter “L”

• Connect BLUE cord to terminal marked with a letter “N”.

MIG 270TE

This model is designed for use with a 400V three-phase supply, and should be

connected through a suitably fused isolator switch.

The GREEN or GREEN & YELLOW wire should be connected to the EARTH

terminal or terminal marked with “ ” symbol. The other two wires are for

connection to the phase wires.

CABLE EXTENSIONS:

IMPORTANT: For extensions up to 10m, the size of the conductors MUST be at

least the same size as that used on the machine - 2.5mm2. It is NOT advised

to use extensions greater than this, but if it is absolutely necessary, the

conductor size must be 4mm2 up to a maximum of 25m in length.

WARNING: THIS APPLIANCE MUST BE EARTHED.

WARNING: NEVER OPERATE THIS MACHINE WITH THE SIDE PANELS

PARTIALLY OPENED OR COMPLETELY REMOVED

Download manual in English (PDF, 8.18 MB)

(Consider the environment and only print this manual if it is really necessary)

Rating

Let us know what you think about the Clarke MIG 220TE Welder by leaving a product rating. Want to share your experiences with this product or ask a question? Please leave a comment at the bottom of the page.

Are you satisfied with the Clarke MIG 220TE Welder?
Yes No

Be the first to rate this product

0 votes

Join the conversation about this product

Here you can share what you think about the Clarke MIG 220TE Welder. If you have a question, first carefully read the manual. Requesting a manual can be done by using our contact form.

More about this manual

We understand that it’s nice to have a paper manual for your Clarke MIG 220TE Welder. You can always download the manual from our website and print it yourself. If you would like to have an original manual, we recommend you contact Clarke. They might be able to provide an original manual. Are you looking for the manual of your Clarke MIG 220TE Welder in a different language? Choose your preferred language on our homepage and search for the model number to see if we have it available.

Specifications

Brand	Clarke
Model	MIG 220TE
Category	Welders
File type	PDF
File size	8.18 MB

All manuals for Clarke Welders
More manuals of Welders

Frequently Asked Questions about Clarke MIG 220TE Welder

Our support team searches for useful product information and answers to frequently asked questions. If you find an inaccuracy in our frequently asked questions, please let us know by using our contact form.

Can I store power tools in a shed or garage? Verified

In general, you can store power tools in a shed or garage, even if it sometimes freezes there. However, it is better for the lifespan of the power tool to store it in a dry place without major temperature fluctuations. In a shed or garage, differences in temperature can cause condensation to form, which can cause rust. In addition, tools that run on batteries last shorter and do not charge as well at very low temperatures. To be sure how your power tool needs to be stored, always thoroughly read the user manual.

This was helpful (27) Read more